Resilient mounts, also known as sound isolation clips, are used in acoustic wall and ceiling assemblies to disconnect the wall system and reduce noise transfer. They are fixed between the steel stud and furring channel using a rubber material that breaks up sound transferring between walls or floors. Resilient mounts can be used with other soundproofing materials and significantly attenuate sound between rooms or floors when installed in walls or ceilings.

1. What is a Resilient Mount /
Sound Isolation Clips ?
By: Resilmount Sound Isolation Solutions

2. Unwanted sound, or noise, is an
increasing concern for architects,
builders, home owners and apartment
dwellers. Noise in buildings can be
generated by footsteps, speech, sound
systems, water pipes, closing doors,
along with many other sounds that travel
through walls and ceilings.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

3. Sound isolation specialists Studco Australia are proud to showcase our
range of patented sound isolation products - Resilmount - Australia's
most affordable solution for guaranteed performance in acoustic walls
and ceilings.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

4. Resilient Mounts, also known as
Sound Isolation Clips
- are used as a way of disconnecting the
wall system in acoustic wall and ceiling
assemblies, for buildings or rooms that
require a high level of noise reduction or
soundproofing.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

5. The purpose of the rubber in the
resilient mount is to break up the
sound that transfers from the
plasterboard to the steel stud and
through to the other side.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

6. 1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au
Unique patented
thermoplastic rubber with
sound cell design.

7. Typically, a wall or ceiling would be constructed by
installing a stud frame, finished with plasterboard.
Whilst, this is acceptable for most single-home
residential applications, sound can easily travel from
one room to another using this method, it can be an
issue when building multi-level apartments, offices
or theatres.
Using resilient mounts significantly reduce noise
transfer, as the resilient mount is fixed between the
steel stud and furring channel, to attenuate the
sound between rooms or floors (see Figure 1).
Figure 1: Wall installation using
M237R Resilmount.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

8. Resilient mounts can be used in conjunction with
other soundproofing material, such mass loaded
vinyl, insulation or sound-absorbing foam, to
absorb and eliminate sound between floors or
through walls.
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

9. 1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au

10. How do you know which resilient mount or
clip is right for your project?
Get in touch with us, today!
1800 788 326 | www.resilmount.com.au | sales@resilmount.com.au
W: www.resilmount.com.au
T: 1800 788 326
E: sales@resilmount.com.au