What is JSA?
A Job Safety Analysis is a task-oriented risk assessment used to review the hazards associated with a particular work task, and to verify that adequate safeguards are in place to control those hazards.
JSAs are known by a variety of terms, including Job Hazard Analysis (JHA), Job Risk Assessment (JRA), Task Risk Assessment (TRA), Safe Job Analysis (SJA).
Job Safety Analysis and its Implementation
INVOLVE employees in the development
KEEP written JSA short and simple
ILLUSTRATE safe practices
ASSIGN responsibility of JSA
TRAIN all employees and supervisors
EXPLAIN the use of JSA to employees
IMPLEMENT safe work practices
REVIEW JSA when equipment or process changes or new information becomes available regarding potential hazards associated with the job.
Why driver training
Statistics
Construction Vehicle Hazards
Driver Safety Tips
Traffic Signs
Driving is something we all do daily.
It’s the most dangerous thing we do, and is the number one killer of those under 50 years of age.
It’s responsible for over 50% of all work-related fatalities.
What is JSA?
A Job Safety Analysis is a task-oriented risk assessment used to review the hazards associated with a particular work task, and to verify that adequate safeguards are in place to control those hazards.
JSAs are known by a variety of terms, including Job Hazard Analysis (JHA), Job Risk Assessment (JRA), Task Risk Assessment (TRA), Safe Job Analysis (SJA).
Job Safety Analysis and its Implementation
INVOLVE employees in the development
KEEP written JSA short and simple
ILLUSTRATE safe practices
ASSIGN responsibility of JSA
TRAIN all employees and supervisors
EXPLAIN the use of JSA to employees
IMPLEMENT safe work practices
REVIEW JSA when equipment or process changes or new information becomes available regarding potential hazards associated with the job.
Why driver training
Statistics
Construction Vehicle Hazards
Driver Safety Tips
Traffic Signs
Driving is something we all do daily.
It’s the most dangerous thing we do, and is the number one killer of those under 50 years of age.
It’s responsible for over 50% of all work-related fatalities.
7 Falsework (Temporary Works) Risk Assessment Templates
Access to work areas by personnel and plant.
Material delivery to work area;
Use of powered access equipment for assembly of false-work (if required)
Falsework installation
(Classified as Temporary Structures)
Dismantling of false-work
Maintenance of Falsework
Worker exposure to direct sun whist working on falsework
(as applicable)
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Temporary Formwork for formwork support. Classed as Temporary Works Relevant Applicable MAS:
• 01411 – MEWP’s;
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for formwork;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 5 20
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Formwork materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
`3 Formwork installation
(Classified as Temporary Structures) • Works at Height;
• Manual Handling;
• Worker c
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Temporary Falsework for formwork support. Classed as Temporary Works Relevant Applicable MAS:
• 01411 – MEWP’s;
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for falsework;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;ac
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 5 20
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Falsework materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
2 Use of powered access equipment for assembly of false-work (if required) • Use of MEWP
(Mobile Elevated
16 Scaffolding (Temporary Works) Risk Assessment Templates
Access to work areas by personnel and plant.
Scaffold Material delivery to work area;
Scaffold design and erection standards
(Classified as Temporary Structure)
Scaffold erection
(Classified as Temporary Structure)
Dismantling of scaffold
Maintenance of Scaffold
Worker exposure to direct sun whist working on scaffold
(as applicable)
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Scaffold for work access. Classed as Temporary Works Relevant Applicable MAS:
• 00245 – Mobile scaffold towers
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Scaffold Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for scaffold;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 4 16
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Scaffold materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
2 Scaffold design and erection standards
(Classified as Temporary Structure) • Trained personnel req
7 Falsework (Temporary Works) Risk Assessment Templates
Access to work areas by personnel and plant.
Material delivery to work area;
Use of powered access equipment for assembly of false-work (if required)
Falsework installation
(Classified as Temporary Structures)
Dismantling of false-work
Maintenance of Falsework
Worker exposure to direct sun whist working on falsework
(as applicable)
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Temporary Formwork for formwork support. Classed as Temporary Works Relevant Applicable MAS:
• 01411 – MEWP’s;
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for formwork;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 5 20
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Formwork materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
`3 Formwork installation
(Classified as Temporary Structures) • Works at Height;
• Manual Handling;
• Worker c
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Temporary Falsework for formwork support. Classed as Temporary Works Relevant Applicable MAS:
• 01411 – MEWP’s;
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for falsework;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;ac
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 5 20
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Falsework materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
2 Use of powered access equipment for assembly of false-work (if required) • Use of MEWP
(Mobile Elevated
16 Scaffolding (Temporary Works) Risk Assessment Templates
Access to work areas by personnel and plant.
Scaffold Material delivery to work area;
Scaffold design and erection standards
(Classified as Temporary Structure)
Scaffold erection
(Classified as Temporary Structure)
Dismantling of scaffold
Maintenance of Scaffold
Worker exposure to direct sun whist working on scaffold
(as applicable)
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Scaffold for work access. Classed as Temporary Works Relevant Applicable MAS:
• 00245 – Mobile scaffold towers
• 00236 - Housekeeping Additional Training required:
Temporary Works Coordinator to be designated NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
P S RR
1 Access to work areas by personnel and plant.
Scaffold Material delivery to work area;
• Vehicles and workers in same working area;
• Storage of materials for scaffold;
• Use of plant – forklift etc.; • Collision with plant or vehicles and live traffic;
• Workers struck by plant, very high risk of fatality;
• Workers struck by plant;
• Poor or unsafe storage, collapse;
• Untrained operators; 4 4 16
HIGH i. Worker pedestrian routes to be designed and implemented with clear signage;
ii. Instruction to workers at induction on use of access routes around the project;
iii. All plant and operators to be Third Party certificated by approved body;
iv. Flagmen to be used to control personnel (only on roads below 80kph);
v. Scaffold materials stored correctly, no more than 2 pallets high and banded together when transporting;
vi. In traffic enclosed areas suitable welfare and first aid facilities shall be implemented to minimized worker movements;
vii. The Logistics plan shall clearly illustrate access and egress points; Workers not complying with controls All supervision to monitor operation;
Regular topic in TBT’s Low
2 Scaffold design and erection standards
(Classified as Temporary Structure) • Trained personnel req
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Digital Tools and AI for Teaching Learning and Research
Ocean rig stop work posters english
1. www.ocean-rig.com
UNPLANNED
STOP WORK
MY HOUSE
MY
RULES!
AT RISK
BEHAVIOR
During an activity, I realize that a
person is knowingly or unknowlingly
doing something unsafe for his or his
team´s Safety.
Examples:
1. Roughneck manual handling a sub left laying on
the rig floor;
2. Banksman pushing the load with the hand, just a
little because we are struggling to center it...
3. Engine Room Mechanic using a spanner as a
hammer, because his tools are in the workshop;
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
2. www.ocean-rig.com
UNPLANNED
STOP WORK
MY HOUSE
MY
RULES!
HAZARDOUS
CONDITIONS
During an activity, I realize that the
equipment or environment may be
unsafe or inapropriate for the ongoing
operation.
Examples:
1. Stainless steel cupboards in the catering area
with protruding steel parts whilst organizing dry
food.
2. Tools left on top of a container prior to
performing a lift to the Supply Vessel.
3. Winch cable or wire sling verified to be in poor
state prior to intiating a lift on the rig floor.
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
UNSAFE ACTS
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
3. www.ocean-rig.com
UNPLANNED
STOP WORK
MY HOUSE
MY
RULES!
CHANGE
OF PLAN
Sudden changes of plan may occur on
the worksite...
Examples:
1. Pulling Out Of the Hole, unable to break the
connection with hydratong. Need to rig-up rig
tongs.
2. When racking back the BHA, one element
needs to be laid down and inspected… Racking
sequence is no longer as planned.
3. Dismantling the engine parts using a manual
wrench. Work is physically demanding and
awkward. Air gun needs to be rigged up.
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
4. www.ocean-rig.com
PLANNED
STOP WORK
MY HOUSE
MY
RULES!
JOB STEPS
During long or repetitive tasks or
working alone, you should plan to
STOP WORK at specific steps to
regularly reassess, confirm that all
controls are in place, still effective and
that everyone is fully engaged.
Examples:
1. Running BOP with slick risers and moving to
telescopic joint;
2. Recieving a long section of 13 3/8 and 13 5/8
casing from the Supply Vessel;
3. Maintenance team member working alone
dismantling a PS30 for repair;
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
Plan to
5. www.ocean-rig.com
PLANNED
STOP WORK
MY HOUSE
MY
RULES!
DAILY
ROUTINE
During our shifts, we have routines all
day long; These subtle events must be
recognize and a need to STOP WORK
is planned. When these occur, reassess
and make sure that the risk levels have
not increased, sufficient supervision and
hazard awareness is maintained.
Examples:
1. Lunch break, coffee, toilet break... Team is short
handed or the task has a change in supervision
level...
2. Shift Handovers of operators in the middle of
a critical operation (Drillers, Crane Operators,
DPO...);
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
UNSAFE ACTS
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
Plan to
6. www.ocean-rig.com
PLANNED
STOP WORK
MY HOUSE
MY
RULES!
GREEN HAT &
THIRD PARTIES
When the task include green hard hat(s)
or third party, a STOP WORK should
be planned by the task supervisor
during the activity to assure all are fully
engaged, understand the hazards and
are following the steps required for a
safe operation.
Examples:
1. Third Party team is building a scaffold in the
Moonpool area for Maintenance to be performed.
2. New Roustabout onboard, on his second hitch,
and Client Third Party equipment demobilization
ongoing.
3. Overhauling of one of the Main Engines involving
several third party workers.
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
UNPLANNED
UNSAFE ACTS
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
STOP
WORK
Plan to
7. www.ocean-rig.com
STOP WORK AUTHORITY
MY HOUSE
MY
RULES!
PLANNED OR
UNPLANNED, A STOP
WORK COMMAND
SHALL BE HONORED
IMMEDIATELY.
• Alert all personnel
involved in the activity
by body gesture, verbal
announcement or radio
UNPLANNED
AT
RISK BEHAVIOR
PLANNED
CONDITION
HAZARDOUS
C
HANGE OF PLAN JOB STEPS
DAILYROUTINE
GREEN HAT &
THIRD PARTIES
STOP
WORK
1. STOP WORK
• Discuss the reasons for
stopping work
• Hazards and controls of the
ongoing activity
2. DISCUSS
• Changes may be required
• Changes may not be required
• Continue working safely
3. RESTART THE JOB
(IF POSSIBLE)
