Interlope africa company profile

INTERLOPE AFRICAR e g n o : 2 0 1 3 / 0 6 3 4 2 0 / 0 7
INTERLOPE AFRICA
Interlope Mining Solutions Pty Ltd • 19 Crn Kruger and Human street • Office 103 • Old Absa Building • Krugersdorp
Tel: 011 692 4528 / 011 660 7422 • Fax is 086 218 7699 • Email: info@interlopeafrica.co.za • Web: www.interlopeafrica.co.za

Company ProleCompany Prole
INTERLOPE AFRICA

INDUSTRIES
SERVED ARE
Page 1
INTERLOPE AFRICA
Power Plant Coal Mining
Port Transportation Chemical Plant
Cement Plant Steel Plant

Wedge wrapped
V-belts offer high
t r a n s v e r s e
stiffness and a
t r a n s m i s s i o n
power 50-100%
higher than classical V-belts. the transmission
limiting velocity constant reaches 40m/s and the
transmission efciency over constancy?.90
MARKING: Wedge wrapped V-belts is divided
into two categories: the metyic SP include
3V(9N),5V(15N)and 8V(25N)Models. V-belts of
these types are marked according to the
outside length of factory V-belts. Specic noting
should be made on the order list if the customer
has special requirements. The length
conservation table is available for conversion
between various models.
Belt conveyers is the production made no joint
belt ,which is characterized with core no joints
,adhesive tape surface smooth ,uniform tensions
the tape running smoothly, the use of small
elongation.
USAGE: Owing to space limitation or in case of
lifting materials at large slope, raised edge
conveyor belt is often used to prevent scatter of
convinced materials. It is suitable for conveying
materials at a large slope from 0 degree to 90
degrees
CHARACTERISTICS:
1. When the material is convinced, can realize
large angle to 900
2. Large conveying capacity, the material will
not be scattered.
3. From the horizontal to inclined, the tilt to level
angle transition shift transmission.
4. Conveyor has the advantages of simple
structure, exible layout, and small occupied
area.
The carcass material and strength of the belt can
be selected according to requirements of users;
we have the following carcass materials: Cotton
(CC), Nylon (NN), and Polyester and nylon (EP).
WEDGE WRAPPED V BELT ENDLESS CONVEYOR BELT
SIDEWALL CONVEYOR BELT
CHARACTERISTICS:
Ordinary at belt is also
known as the drive belt,
generally use high-quality
cotton as the skeleton
Layer, canvas, rub the
surface of paste for the compound, then the
multilayer canvas together constitute a at belt,
at belt has the advantages of high strength,
aging resistance ,exibility good, use small
elongation and other excellent performance.
Mainly used for mining, metallurgy, port. It is also
widely used in mechanical transmission where
large power rice processing, agricultural
irrigation, timber cutting and other industrial and
agricultural power equipment in power
equipment plays a more and more important
role.
CHARACTERISTIC:
1. Flat belt cutting edge and adhere to the
production of several layer of canvas air
conduit together, with sides cut form, with the
edge surface are coated with rubber paste.
FLAT TAPE
Page 2
INTERLOPE AFRICA

STEEL CORD CONVEYOR BELT
USAGE: Steel wire rope core conveyer belt,
suitable for high strength long distance large
capacity occasions for conveying materials,
under special circumstances, also suitable for
high strength, short distance transportation.
CHARACTERISTICS:
1. High tensile strength: the belt is suitable for
large span, long distance transportation of
materials.
2. Little elongation: required tight short stroke.
3. Drive roller with steel wire rope diameter is
small: a layer is longitudinally arranged in the
core skeleton, ex fatigue. It can be
equipped with smaller diameter roller, so
that the equipment is compact.
4. Rubber and steel wire rope adhesion is good:
steel wire galvanized surface, at the same
time with rubber excellent adhesion with the
steel wire rope, and wire rope adhesive
impact resistance, not easy to fall together,
block, the use of the original long life.
5. Wire rope tension uniform: because of
advanced manufacturing technology, wire
rope arranged uniformly, tension, balanced
running, without deviation.
6. Channel performance: core without
transverse frame, easy to form a deep trough,
loading material, and prevent the scattered.
7. Available x ray inspection: the skeleton wire
rope on the conveyor, available X ray aw
detection, prevent the matter to occur.
POLYESTER CONVEYOR
Polyester belt is
also called the EP
conveyor belt, its
tensile strength is
t he p o l y e s te r ,
polyamide weft
interwoven into
the canvas, its
characteristic is
the low elongation and zonal good channel
performance, good water resistance, wet
strength is not reduced, not mildew, initial
modulus polyester higher, desirable safety
coefcient is low, suitable for long distance high
load, high speed conditions for conveying
materials.
NYLON (NN) CONVEYOR
Nylon is a rubber
industry is the
one of the best
v a r i e t y
p e rf or ma nc e
synthetic bre,
the structure of
longitude and
l a t i t u d e a r e
Nylon Braided, most versatile foretaste, the most
prominent advantage is good wear resistance,
high fatigue resistance, nylon canvas conveyor
belt, high strength, impact resistance, into a
good groove, interlayer adhesion force ,features
excellent ex and long service life, suitable for
long distance less, high load, material conveying
speed conditions, widely used in mining,
metallurgy, construction, ports and other
industries.
INTERLOPE AFRICA

ELECTRICAL DIVISION
LIGHTING
T8 1.2
Mwarmwhite- CCT:3000-3500K
Naturewhite - CCT:4000-5000K
Daywhite- CCT:6000-6500K
CHARACTERISTICS:
• Dimension: Φ26*30*L1200mm
• Led Qty (pcs): 96 120
• Power: (w) 18 20
• Luminous Flux(lm): 1800
• View Angle: 120°
• Power Factor: >0.90
• Material: Aluminium Alloy and PC
• Voltage: 85-264V AC
• Working time: >35000 hours
GET T8 1.2m: T8 1.5m: T8 1.8m: T8 2.4m
ALL IN STORE AND JUST STATE YOUR WATTAGE
18W LED CONE LAMP & 6W LED CONE LAMP
T8 Led tube 12VDC T8 Fixture 1.2m Single tube
GET T8 Fixture 1.2m: T8 1.5m:
ALL IN STORE FOR YOU
Material: Aluminum Alloy
Iron thickness: 0.4mm
Cover: powder-coated
ONE SIDE electricity
L2426m*W30mm* H20
mm For single tube
Material: Aluminium Alloy
Iron thickness: 0.4mm
Cover: powder-
coatedONE SIDE
electricity
L1826m*W30mm* H20 mm
for single tube
Find Various wattages “In clear and Green”
colour: 6 W,8W ,10W,12W,18W,20W,24W,
40W and 60W.
INTERLOPE MINING SOLUTIONS ELECTRICAL CONTRACTORS & SUPPLIES DIVISION
T8 FIXTURE 1.8M
Page 4
INTERLOPE AFRICA

18 W Normal Lights 6 W Normal Lights
Input Voltage: AC85-264V
* Wattage: 150W±5%
* LED Qty/Typ: 3*50W
* Luminous Flux: 14000LM ±5%
* Beam Angle: 120°
* Dimension: L400*W230*H150mm
WARNING
FLASHING LIGHTS
RECHARGEABLE
INTERLOPE MINING SOLUTIONS ELECTRICAL CONTRACTORS SUPPLIES DIVISION
LED FLOODLIGHT 50 to 150W
1 Rechargeable Surround LED Stope Light System
2 Rechargeable Compact Surround LED Light
System
3 Rechargeable Heavy Duty Surround LED Light
System
4 Rechargeable 222 LED Area Light System
5 Personal LED Work Light - Rechargeable
6 Portable, Rechargeable High Power Mining LED
Light
7 Cap Lamp Powered 222LED Light Units
8 Rechargeable, High Power 18W LED Work Light
Units
9 High Intensity LED Flood Lights
10 Critical Area LED Light with Back Up Battery
11 Emergency Back-up LED Light Systems
12 G24 Haulage Illumination String Light Systems
13 G24 Plug Operate Gully Illumination Light
Systems
14 LED Strip Rope Lights
15 LED Fluorescent Replacement Tube
Lights
16 Vapour, Dust and Corrosion Proof
Fluorescent Light Units
17 Energy Saving Replacement Bulbs
18 32VAC Winch Lights
Intrinsic Safe Compact
Rechargeable Strip LED Light
Systems
INTERLOPE AFRICA
Find normal lights from:
5W,7W,9W,12W,16W and 18W

ELECTRICALELECTRIC MOTORS
Main White/Red Lamp Current =820mA ± 10%
Dimmed White Lamp Current = 82 mA ± 10%
Standby “OFF” Current = 12uA Typical
Battery Type = Lithium-ion
Battery Construction = 3x3 cell array
Battery voltage = 11.8volts Nominal
Battery Capacity = 6.6 A/Hrs
Battery protection:
- Cell balance
- Under voltage cut-off
- Over Charge cut-off
Charge Current = 3.0 Amps Max
Charge time = 3 Hrs Max
Charge pins output = Diode protected
Charging Voltage = 12.9 volt
“Find Me” strobe repetition rate = 50 – 70 Seconds
“Find Me” strobe pulse length = 30 – 50 Milliseconds
MECHANICAL
Weight = 1087g
Dimensions
(L)Length - 290mm
(H)Height - 100mm
(HB)Height Bracket - 135mm
Case Materials;
Handle - Carbon re-enforced nylon
End caps - ABS
Optical Tube cover - Clear polycarbonate
Environmental Protection
DISTRIBUTION BOXES
Supply of Electrical Products
Electrical Toolbox
Page 6
INTERLOPE AFRICA

SOLAR POWERED LIGHTS
1- Solar Power Area Illumination
2- Solar Powered Robot Units System
VEHICLE LIGHTS
1- LED High Intensity Vehicle Lights
2- LED Vehicle Warning Lights
SEARCH INSPECTION LIGHTS
1- Handheld Inspection Lights
2- Vehicle Roof Mounted Xenon HID Search Light
3- Rechargeable Flash Lights
4- Micro, Rechargeable, High Power LED Work
Inspection Light
SEARCH INSPECTION LIGHTS
1- Handheld Inspection Lights
2- Vehicle Roof Mounted Xenon HID Search
Light
3- Rechargeable Flash Lights
4- Micro, Rechargeable, High Power LED Work
Inspection Light
HOPPER LIGHTS
1- Rechargeable Dual Colour LED Hopper Light
2- 24V Dual Colour LED Hopper Light
SAFETY WARNING LIGHTS
1- Flashing LED String Lights
2- Dual Colour LED Robot Units Systems
3- Starter Box Status Warning LED Light and Siren Unit
4- Dual Colour LED Indication Units
5- Vehicle Proximity Warning System
ELECTRICAL DIVISION
WINCH STARTER BOX
525 VAC 37KW 3 PHASE WINCH SWITCHER WITH 32
NO VOLT COILS FOR
525VAC
37//55kW
75kW 3 PHASE
WINCH STARTER BOXES
37/55kW No Volt
Coil 75kW
No Volt Coil
LED StripLED Strip LED StripCABLES
CUSTOMISED STARTER
BOX PER YOUR NEED
ELECTRONIC MEASURE EQUIPMENT
LIGHTING DIVISION
INTERLOPE AFRICA
TransformersUPS

INTERLOPE AFRICA
ELECTRICAL DIVISION
WE SUPPLY, INSTALL AND ALSO DO MAINTENANCE OF GENERATORS
At client Slab preparationAt factory
Generator slab
PLEASE NOTE WE DO ALL OTHER ELECTRICAL
RELATED SERVICES:
e.g. supply and install of all electrical appliances
Repair of all Electrical appliances
LET US PROVIDE YOU WITH ENERGY SOLUTIONS
EMERGENCY POWER BULB
Power : 5W
Lumen : 240-260LM
CRI : 70
Power in Emergency : 5W
LED: 35pcs 2835SMD
Voltage: AC85-265V
Size : H120X70mm
Color : White/Warm white/Cold
White
Emergency time : 3hours
Function : emergency,
rechargeable,
flashlight,strobe,distress
signal(SOS),camping,
reading
Lamp size : 60*114mm,
60*150mm(stretch)
Lifespan : 35,000hours
Warranty : 1 year
Input Voltage : AC90-265V/50-60HZ
Luminous : 240-280LM
CCT : 3000-3200K/4000-
4500K/6000-6500K
Lamp Base : E27/B22
Beam Angle : 160°
LED Chips : SMD2835
CRI75Ra Automatically Emergency,
neen’t remote control
Charge time : about 5hrs
Emergency time : up to 3hrs
Battery : 1pcs Lithium
battery/1800mA
Function:
emergency, rechargeable, flashlight, strobe,
distress signal(SOS),camping,reading
Lamp size : 60*114mm,
60*150mm(stretch)
Lifespan : 35,000hours
Warranty : 1 year
Dual
Purpose

INTERLOPE AFRICA
GENERAL CATALOGUE
EXCLUDING

Model: WTJD-6S
Application
1. Metal and non-metal mineral prospecting
2. Underground water survey and prospecting
3. Environment survey, engineering exploration, geothermal
exploration, mine goaf, geology disaster survey etc.
Main technical specications
High voltage input: 900V
Current input: 6000ma
Input protection: overvoltage, overcorrect protection device
Max transmitting power: 6000W
Self-electricity alignment: ±2500mv
Power supply waveform: 1-60s, duty ratio: 1:1
Test range: ±4000mv
Voltage resolution: 0.01uv
Current resolution: 0.02ua
Internal memory: 2GB( 32GB extensible)
Power supply: 14.8V 5200mah Lithium battery
Working ambient temperature: -10°C~+50°C
EXPLORATION DIVISION
INTERLOPE MINING SOLUTIONS EXPLORATION DIVISION
Model: WTDF-2
Features
1. Fast and high work efciency, 10 times faster
than the human DC electric prospecting
apparatus
2. Light in weight, easy to carry
3. Easy operation, human friendly HMI
4. High performance amplier and imported core
parts, high performance AD converter
5. Wide frequency range, greatly improve the
prospecting depth
6. Strong disturbance ability, high performance
wave trap, 5 steps gain control, suitable to
operate in various kinds of geology environment.
7. Thin-lm switch panel, ABS enclosure, nice
appearance, durable in use
Technical specications
1. Voltage input range: ±4V
2. Frequency input range: 5-3000HZ
3. Frequency test range: 5-3000HZ (constant
frequency mode)
4. Resolution: 0.001mV
5. Repeated test error: ±1% ±1LSB
6. A/D conversion: 16-bit, 1Msps
7. Input electric resistance: 80MΩ
8. 50Hz inhibiting ability: 80dB
9 .Data storage: 48W unit data, automatic storage,
can display curve and data
10. Display: 240×128 LCD
11. Data port: USB 2.0
12. Power supply: DC7.2V 4800mAh
13. Power: 300mA
14. Working temperature range: -10°C~+50°C
15. Suitable working humidity: 95%
16. Main machine weight: 2.5kg
17. Main machine size: 310×230×108mm
PORTABLE NATURAL ELECTRIC PROSPECTING APPARATUS
DIGITAL INTENSIFICATION
POLARIZATION(IP) INSTRUMENT
Page 10
INTERLOPE AFRICA

Oil consumption: 0.45L/H
Core drilling diameter: 20mm
Drill diameter: 26mm
Rotation speed: 1820 rpm
Drilling depth: 20m
Drilling power: 1.5HP (full speed operation)
MOBILE GASOLINE
POWERED DRILLING RIG,
PORTABLE DRILLING RIG
drilling mode: Hi-speed
rotation cut
Circular medium: clean
w a t e r , m u d F i n a l h o l e
diameter: 46-60mm Max.
Drill depth: ≤5M
Dynamic head rotation speed: 300-800 r/min
Dynamic head travel: 600mm
Power: 5.5HP
Net weight: 33 kg
Main features
Wire synchronization technology, suitable for
mountain area, complicated geological
environment
IGBT bridge circuit reaches large power, rapid
shut-off light electromagnetic transmitter.
Transmitter
Power supply: DC 4V~150V
Rated output power: 3Kw
Max. Output voltage: 150V
Max. Output current: 50A (Continuous), 70A(
pulse) Frequency range: power supply 1.25~
125Hz (8 frequency points)
Output waveform: two modes (0 and 1)
Shut-off time: variable as the loading coil change
Min. shut-off time: 1.2µs, pure resistance loading
Synchronization mode: wire
synchronization Overall size:
360mm×250mm×250mm Weight: 9kg Receiver
Overall size: 324mm×210mm×230mm
Weight: 7Kg (without battery)
Sampling frequency: 5 µs fastest, optional
Dynamic range: 156db
Overlay times: 1-9999 optional
Bandwidth: DC to 30 Khz
Synchronization mode: wire SUNC
BACKPACK TYPE DRILLING RIG, MOBILE DRILLING
MACHINE, GEOLOGY EXPLORATION EQUIPMENT
PORTABLE TRANSIENT MAGNETIC ELECTRIC
APPARATUS FOR COMPLICATE GEOLOGICAL
CONDITION Model: DZK-EMA03
INTERLOPE AFRICA

Receiver
1. A/D converter: 16Bit 1M/s
2. Sampling rate: 1us, 4us, 16us
3. Dynamic range: 140dB
4. Background noise: 1uV
5. RAM: 128M
6. Hard disk: 40G
7. Port: USB, Parallel port, serial port, network cad
8. Display: colourful TFT
9. Main amplier gain: 1/10/100/1000
10. Stacking times: 1-9999
11. Channel number: 2
12. Test channel number: free programming
13. Transmission band: 0-400kHz Transmitter
1. Transmission current: 1-60 adjustable
2. Current transmission frequency: 225, 75, 25, 12
.5, 6. 25 ms
3. Max. Transmission power: 12 KW 4.Output
voltage: 12-96 (v)
5. Shut-off time: 1-300 us
6. Delay range: 1us-160ms
7. Input voltage: DC 12-96V
8. Transmission waveform: biopolar rectangular
wave
9. Transmission coil: 5*5-300*300 for single-turn
TRANSIENT
ELECTROMAGNETIC
ELECTRIC PROSPECTING
APPARATUS MODEL:
DZK-EMA-02
MINING
EXPLOSION-PROOF
INTRINSIC SAFETY
TRANSIENT
ELECTROMAGNETIC
APPARATUS MODEL:
DZK-EMA01
SMALL BORE COMPASS INCLINOMETER, WELL LOGGING
INCLINOMETER, DRILLING INCLINOMETER MODEL: LCX-2
Specications
Master controller: Industry personal computer A/D
converter: 16 bit
Sampling rate: 1us, 4us, 16us
Dynamic range: 140dB
Background noise: 1uV
RAM: 512MB
Hard disk: 1GB Extension disk
Port: USB, parallel port, series port, network card
Display: 8.4inch TFT LCD and Transmitting current:
2.5A
Current pulse width (ms): 10, 20, 40 and Current
transmission frequency: 75, 25, 12. 5, 6.25(Hz)
Transmission coil size: 1X1m~3X3m and Shut-off
time: 0.5~300 (ms)
The small-bore compass inclinometer is specially
used to test vertex angle and azimuth in drilling
process, it uses overhanging to test vertex angle,
magnetic needle orientation to test azimuth, it’s
suitable for non-magnetic rock stratum and
ledge, diameter larger than 46mm, it’s widely
used in engineering, hydrology, coal, metallurgy,
petroleum, geology area. It’s kind of very
common geology surveying instrument.
1. Vertex test range: 0°~50°,error ±1°(0°~30°),
±2°(30°)
2. Azimuth test range: 0°~360°, error:±4°( when
vertex angle 4°)
3. Sealing performance: 15Mpa of hydraulic
pressure
4. Overall size: Ø40mm×1230mm, weight: 6kg 5.
Working time: Max. 120min for mechanical
timing set, Min. 20mins
Page 12
INTERLOPE AFRICA

Description: The wireless digital compass
inclinometer is specially used to test azimuth and
vertex angle during drilling, it’s suitable for non-
magnetic rock stratum and ledge, diameter larger
than 46mm, it’s widely used in engineering,
hydrology, coal, metallurgy, geology area, it’s kind
of very common geology surveying instruments.
1. Vertex angle test range: 0°~50°/±0.5°
2. Azimuth test range: accuracy: 0°?360°
( Vertex angle ?4°)
3. Sealing ability: ?15Mpa of hydraulic pressure
4. Overall size: Ø40mm×1230mm, Weight: 6kg
5. Working time:?120mins
6. Work temperature: -20°C ~ +85°C
7. Power supply: DC 9V, Handle controller: 4pcs
5# battery
The Smart three component ux gate magnetometer is widely used for ground magnetic prospect of iron
ore, non-ferrous metal ore, also for roadway and tunnel of iron and other metals ore, petroleum and coal,
magnetic mixture ore as well. (Technical specications) :::( Prospect axial
direction: earth magnetic eld vertical component) :::( Test mode: relative
and absolute) :::( Range: 10000?100000nT) ) :::( Range: 10000?100000nT)
:::(Resolution: 0.1-1nT) :::( Diversion error: Z axial?±10nT, total eld ±20nT)
:::(Accuracy: ?±0.5%) DAQ sampling rate: 10Hz Display mode: difference
value and absolute value, display data and curve Data storage capacity:
100,000 data points, U disk export data Connection port: USB Total power:
120mA~200mA Power supply: 7.2V 4000mA for 18hours standby time Working
ambient temperature: ?10 ~ +50
WIRELESS DIGITAL
COMPASS INCLINOMETER,
WELL LOGGING
INCLINOMETER, DRILLING
INCLINOMETER
MODEL: LCX-2X
PRECISION WIRELESS
GYRO INCLINOMETER,
GYROSCOPIC
INCLINOMETER,
WELL SURVEY INSTRUMENT
MODEL: TCX-5B
SMART THREE COMPONENT FLUX GATE MAGNETOMETER,
GEOPHYSICAL INSTRUMENT MODEL: WTCL-SC7
Description: This type gyro inclinometer is kind of
new digital inclinometer used to test magnetic hole
well deviation, it’s widely used in engineering,
hydrograph, colliery, metallurgy, petroleum,
geology area.
1. Vertex angle test range: 0°~50°/±0.1° 2.
Orientation test range: 0°~360°/±4°
3. Sealing ability: ?15Mpa
4. Well test depth: ?2500m
5. Overall size: Ø40mm×1230mm, Weight: 7Kg 6.
Work temperature: -20°C ~ +85°C
7. Work voltage: DC 9V, Handle set power supply:
4pcs 5# battery
8. Test points: 9 holes and 99 groups data of each
hole
INTERLOPE AFRICA

PRECISION FLUX GATE MAGNETOMETER (AUTO LEVELLING), MINERAL EXPLORATION INSTRUMENT
MODEL: WTCL-6A
Features
High resolution, high accuracy, stable performance RS232 communication, easy for data transmission, easy
for cooperation with software on computer. High performance transducer, high resolution and accuracy,
stable performance, no temperature drift. Probe option:
1. Full solid probe (with level base); Technical specications
2. Auto-level probe (silicone oil damp)
Prospect axial direction: earth magnetic eld vertical component
Test mode: relative and absolute test
Range: 10000?100000nT
Resolution: 0.1-1nT
Diversion error: ?±10nT
Accuracy: ±0.5%
DAQ sampling frequency: 10Hz
Data storage capacity: 100,000 points
Total power: 120mA?200mA
Power supply: 7.2V 4000mA, 18hours standby time
Work ambient temperature: ?10°C ??+50°C
Display mode: difference or absolute value, directly
magnetic eld intension prole curve graph
Probe size: Ф88mm × 60mm
Power supply cable: 1.5m
Probe weight: 0.5kg
Main machine weight: 2kg
TECHNOLOGY IN THE MINING SECTOR TO INCREASE OPERATIONAL EFFICIENCY
INTERLOPE MINING SOLUTIONS IS HERE FOR YOU, BRINGING TECHNOLOGICAL SOLUTIONS AT THE DOOR STEP
MINING ROBOTS UNDERGROUND TRACKING SYSTEMSUNMANNED TRACKING SYSTEMS
Page 14
INTERLOPE AFRICA

INTERLOPE AFRICA
LOCOMOTIVES
‘UNDERGROUND
TRANSPORTATION OF ORE’
INTRODUCTION:
• Mining locomotive mainly used for underground transportation
and long distance heavy transportation
Battery Locomotive
Battery locomotive is equipped with battery pack as energy
with no limited of distance. The battery pack need charging
by professional charging equipment accordingly to the
instruction.
Category: Normal type; Security type; Explosion proof type.
• l Normal type locomotive is suitable for underground
transportation with no gas, dust, explosion
problems
• l Security type locomotive is suitable for underground
transportation with good
atmospheric conditions.
• l Explosion proof type locomotive is suitable for underground
transportation which contains gas, dust.
Trolley Locomotive
Working condition: mainly used for the
no-gas mine,level one, level two gas
mine and underground mine with fresh
wind flow.

LOCOMOTIVES
‘UNDERGROUND
Page 16
INTERLOPE AFRICA
Frame is the overall framework of the
locomotive.
Frame is used to assemble locomotive parts
and enrich the adhesion of locomotive.
Wheel-set is used for supply traction effort to
locomotive which ensure locomotive running
smoothly.
FRAME WHEEL-SETS
Gearbox issued for protect bearings. The wheel
sets is fixed on the frame though the guide slot
at two sides of gearbox which ensure wheel set
works flexible
while running.
Spring is used for release impact to the wheel
while locomotive is running which ensure
locomotive work safety and smoothly.
GEARBOX SPRING
Electric locomotive brake can be divided into mechanical
braking and electrical braking. Mechanical braking use damper
brake or detent. Electric braking is braking by traction motor
which using the controller to change the electrical circuit
with no special setting. Braking torque generated braking
device is used for slow down or stop locomotive.
Damper brake mainly use brake shoe type. Using leverage to
make wheel tread brake shoe press, with the aid of friction
to the brake shoe and wheel braking torque. The operating
methods of manual, pneumatic, hydraulic.
Gearbox
BRAKING SYSTEM
1. Hand wheel 2. Screw 3. Bush 4. Nuts 5. Balance bar 6.
Pull rod 7.8. Brake bar 9.10 shoes 11. Positive and
negative buckle adjusting screw

INTERLOPE AFRICA
LOCOMOTIVES
‘UNDERGROUND
Effect of buffer connecting
device is simple and reliable
to connect the vehicle, Slow
vehicle collision impact.
Trolley locomotive with rigid
buffer, Motor vehicle
batteries using spring buffer.
BUFFER CONNECTION DEVICE SANDING DEVICE
• l Used for gas and coal dust accumulated transportation
• l Used for transportation, as well as smaller output less rules of roadway transportation system.
BATTERY LOCOMOTIVE
Sanding device for mine
locomotive
1, 3- pull rod; 2- rocker;
4- cone;
5- sand pipe; 6- spring

LOCOMOTIVES
‘UNDERGROUND
Page 18
INTERLOPE AFRICA
MAIN PRODUCT MODEL NO.CTY2.5/6,7,9G(B)
2.5T Battery Locomotive
Adhesive / total weight (t
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Battery Capacity (Ah)
Power (KW)
Dimensions Length(mm)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Min Curve radius (m)
Controller
Braking method
2.5
600,762 or 900
2.55
6.13
4.54
48
B330
3.5*1
2360
914,1076 or 1214
1550
650
460
5
Resistance or IGBT
Mechanical Brake
MAIN PRODUCT MODEL NO.CTY5/6,7,9G(B)
5T Battery Locomotive
Adhesive / total weight (t)
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
5
600,762 or 900
7.06
12.26
7
90
385
7.5*2
2860
920,1082 or 1220
1550
850
520
6
Resistance or IGBT
Mechanical Brake

INTERLOPE AFRICA
LOCOMOTIVES
‘UNDERGROUND
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Battery Capacity
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller Resistance
Braking method
6
600
7.06
12.26
7
90
385
7.5*2
2860
920,1082 or 1220
1550
850
520
6
Resistance or IGBT
Mechanical Brake
8
600,762 or 900
11.18 or 12.83
19.62
6.2 or 7.5 or 7.8
110,132,140 or 144
560
11*2
4430,4420
1054,1356
1600
1100 or 1150
680
7
Resistance or IGBT
Mechanical Brake

LOCOMOTIVES
‘UNDERGROUND
Page 20
INTERLOPE AFRICA
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
6T BATTERY LOCOMOTIVE
12
600,762 or 900
16.48
29.43
8.7
192
560
22*2
5100
1050,1212 or 1350
1600
1220
680
6
Resistance or IGBT
Mechanical Brake

INTERLOPE AFRICA
LOCOMOTIVES
‘UNDERGROUND
TROLLEY LOCOMOTIVE
l Working condition: mainly used for the nogas mine, level one, level two gas mine and underground
mine with fresh wind flow.
MAIN PRODUCT MODEL NO.CJY1.5/6,7,9G(B)
1.5T Trolley Locomotive
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
1.5
600、762 or 900mm
2.55kN/3.24kN
3.68kN
4.54km/h/ 6.6km/h
100V/250V
385
3.5kW×1~6.5kW×1
2340mm/ 2370mm
950、950 or 1100mm
1550mm
650mm
Φ460mm
5m
Resistance or IGBT
Mechanical Brake

LOCOMOTIVES
‘UNDERGROUND
Page 22
INTERLOPE AFRICA
MAIN PRODUCT MODEL NO.CJY3/6,7,9G(B)
3T Trolley Locomotive
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
3
600、762 or 900mm
6.1kN/ 5.74kN
7.36kN
10.6km/h/ 7.5km/h
250V/ 550V
385
12kW×1~6.5kW×2
2700mm/ 2750mm
940、1082 or 1220mm
1550mm
816mm/ 850 mm
Φ650mm/ Φ520 mm
1800/ 2000mm
Resistance or IGBT
Mechanical Brake
5t
600、762 or 900mm
2.55kN/ 3.24kN
3.68kN
4.54km/h/ 6.6km/h
100V/ 250V
385
3.5kW×1~6.5kW×1
2340mm/ 2370mm
950、950 or 1100mm
1550mm
650mm
Φ460mm
5m
Resistance or IGBT
Mechanical Brake

INTERLOPE AFRICA
LOCOMOTIVES
‘UNDERGROUND
Track gauge (mm)
Traction (KN)
Max. Traction (KN)
Speed（km/h)
Battery Voltage (V)
Power (KW)
Width(mm)
Height(mm)
Wheelbase (mm)
Wheel diameter (mm)
Controller
Braking method
7t
600、762 or 900mm
2.55kN/ 3.24kN
3.68kN
20
100V/ 250V
385
3.5kW×1~6.5kW×1
2340mm/ 2370mm
950、950 or 1100mm
1550mm
1100mm
Φ460mm
7m
Resistance or IGBT
Mechanical Brake
Subway Project Case

LOCOMOTIVES
‘UNDERGROUND
Page 24
INTERLOPE AFRICA
THE CHARACTERISTICS OF AC FREQUENCY CONVERSION ELECTRIC LOCOMOTIVE:
l Frame control mothod:
The electric locomotive adopts the frame control and AC dragging. Good performance of balanced
traction motor power is suitable for sharp slope overload operation.
l Good adhesion utilization and start traction:
Adhesion condition is the key factor in engine performance. The locomotive adhesion coefficient is 0.285,
the measured adhesion coefficient is above 0.32, which makes it has big starting tractive effort. The
electric locomotive can pull train which weighs 250 tons at 8 ~ 9 km/h speed run uphill on the slope of 35
‰. The locomotive is particularly for tunnel boring machine(TBM) construction of traction transportation.
l Others：
Button switch use Schneider Electric products;
Warning light and ordinary light use LED DC 24v combination lamps and lanterns;
Can install video motor system according to client’s requirement, monitor screen in driver cab,
infrared cameras on the rolling stock car, which can monitor the rear of locomotive and the entire
locomotive space;
Traction battery brand is ZIBO or ZHENGJIANG;
Battery charger is Xi 'an Kaiyuan’s.
l Good braking performance
Because of large load capacity and sharp slope (up to 35 ‰), especially locomotive traction is
overloaded downward, the braking performance must be good. We design electric braking, compressed
air braking, spring parking braking and emergency braking security measures according to the aboved
requirements.
Electrical braking: Used as a conventional brake, with functions of regenerative braking energy,
locomotive kinetic energy turns into electrical energy by converter to the battery. Compressed air braking:
In order to make the locomotive traction transport safety and reliable, electric locomotive is also
equipped with air braking system. Air braking system adopts dual circuit air brake system to get automatic
braking force distribution function, exhaust brake control to control the locomotive operating condition.
The locomotive brake using tread brake, shoe brake on both sides. Muck car and segment car use
unilateral shoe brake. Spring parking braking: When electric locomotive is powered off to park as usual or
on the ramp, spring parking brake is to be used to prevent the slipping; When air system pipe leaking, air
pressure drops to the set value, electric locomotive brakes run automatically to ensure safety

INTERLOPE AFRICA
THE CHARACTERISTICS OF AC FREQUENCY CONVERSION ELECTRIC LOCOMOTIVE:
OFF ROAD TRUCK TYERS

INTERLOPE AFRICA
GET THE CUSTOM BUILT, SPECIALIZED ROBOT YOU
REQUIRE. DO YOU NEED A CUSTOMIZED ROBOT?
DON'T LET THE WORD CUSTOM SCARE YOU.
THE WORD CUSTOM TO US SIMPLY MEANS THAT
WE WILL PROVIDE YOU WITH A SOLUTION THAT
PERFECTLY SUITS YOUR NEEDS AND FITS WITHIN
YOUR BUDGET.
ROBOTS AND UNMANNED AUTOMATED
TRUCKING SYSTEMS INCREASES
OPERATIONAL EFFICIENCY AND
PRODUCTIVITY
TRANSFORM YOUR EARTH MOVING OPERATIONS
WITH COMMAND AND CONTROL SOFTWARE.
ALLOW ONE OPERATOR TO CONTROL MULTIPLE
R O B O T I C E A R T H M O V I N G E Q U I P M E N T .
VEHICLE AUTOMATION TECHNOLOGY CAN
OPERATE IN UNSTABLE OR OTHERWISE UNSAFE
AREAS WHILE AT THE SAME TIME IMPROVING
EFFICIENCY AND PRODUCTIVITY.
INTERLOPE MINING SOLUTIONS BRINGS
AUTOMATED HAULING SYSTEM SOLUTION. EACH
AUTONOMOUS DUMP TRUCK IS EQUIPPED WITH
VEHICLE CONTROLLERS, A HIGH PRECISION GPS
SYSTEM, AN OBSTACLE DETECTION SYSTEM AND
A WIRELESS NETWORK SYSTEM. THESE FEATURES
ALLOW THE DUMP TRUCK TO SAFELY OPERATE
THOUGH A COMPLEX LOAD, HAUL AND DUMP
CYCLE AND TO INTEGRATE WITH THE DOZERS,
LOADERS AND SHOVELS THAT ARE ALSO PART OF
THE AUTONOMOUS SYSTEM.
THE AUTONOMOUS HAULAGE SYSTEM (AHS)
ALLOWS UNMANNED OPERATION OF ULTRA-
CLASS MINING TRUCKS.
AN UNDERGROUND ROCK BREAKER
CAN NOW BE REMOTELY USED
REMOTE ROBOTIC MINING SYSTEM WITH COLLISION
AVOIDANCE
When you think of mining, you think of breaking
rocks. You think big rocks, you think danger. In the
interest of safety and through-put, Mining engineers
have come up with an Underground Rock Breaker -
a system which remotely controls these huge
hydraulic rock-breaker machines that weigh-in at
ten tonnes. This system will allow operators to
prevent accidents and collisions involving massive
rock-breaking equipment at mines that might be
thousands of kilometres away.
It can sort you out from copper, iron, gold and other
mining environment
RELATED VEHICLES
AHS (Automated Hauling System) to deliver these
key benets for you Reduced number of drivers
working in hostile and remote condition
• Increased safety on mine sites
• Reduced operating costs – extended tyre life
• Increased productivity and efciency
• The environmental benets of the AHS systems
are reduced fuel consumption and emissions.
ADT EXCAVATOR DOZER
MINING ROBOTS UNMANNED AUTOMATED TRUCKING SYSTEMS

INTERLOPE AFRICA
REDUCE MAINTENANCE COST
By cloning the
Practices of your very
Best drivers, haul truck
Components
Experience less wear
And tear.
ROBOT DROPPED IN THE
MINE SHAFT
AUTOMATED HAUL TRUCK CAN SUBSTANTIALLY
PRODUCTION COSTS
ENHANCED
SAFETY
METRICS
COAL RESCUE ROBOT
This robot was built to be sent
down a mine shaft. This was a
low cost platform that could
be abandoned at the bottom
of the mine when the
inspection was completed.
It was outtted with a pan and
tilt camera, lights and a ber
This is a robot that was built for
a mining company to drive
into abandoned mineshafts to
search for potash leftover
from years ago. This Robot
built the platform to carry
camera equipment and an
array of other sensors to get feedback from
underground.
In a mining accident rst
responders are working
against the clock and against
a myriad of dangers to assess
the situation and rescue
trapped miners. The mine has
unknown and potentially
deadly conditions creating a challenge for rst
responders and often limits their ability to assess the
situation in a timely matter. There is a need for a
robotic system that could be used to support a mine
rescue team, functioning primarily as a “scout”,
allowing for the exploration and assessment of the
mine conditions.
INCREASED OPERATIONAL EFFICIENCY
Through more Consistent and precise Haul truck
operation, Cycle time is reduced. The crusher is
never Kept waiting, and Product is produced in less
time.
REDUCED EXPOSURE TO LABOUR SCARCITY
Automated haul trucks ensure that your operations
are protected when access to labor is
compromised.
Through more Consistent operations, and a
signicant reduction in driver hours, incidents due
to fatigue or errors are greatly reduced.
DECREASE YOUR OPERATING COSTS BY 15¢ PER
TON OR MORE
ROBOTS
COAL RESCUE ROBOT

INTERLOPE AFRICA
WIFI UNDERGROUND
TRACKING SYSTEM
FORE MORE INFO ON TECHNOLOGY
CONTACT US A COMPLETE TECHNOLOGY
BROCHURE WILL BE SENT TO YOU
• Useful to track specic assets and
individuals.
• You can detect when they are in motion
and when they are still
• Create specic alerts when:
- A tag is moved
- The panic button is pressed
- The tag falls (fall-detection)
- The battery level is low
• Many parameters can be set, such as the
scan rate, motion detection, low battery
level, panic button behavior.
• Battery duration is about 25 days,
rechargeable.
• Tags are small and light.
P
U
R
P
O
S
E
T
O
TRACK SPECIFIC ASSETS, PEOPLE INDIVIDUALS
Using technology-assisted guidance, drivers
consistently spot themselves without shovel
assistance. The shovel is never kept waiting,
and its productivity is increased.
IMPROVE SPOTTING SAFETY
By continuous monitoring of truck and shovel
locations, risk of collision is greatly reduced or
even eliminated
INCREASE SITE REVENUE
By improving the productivity of the shovel,
more ore is produced in the same amount of
time.
Technology assisted spotting
increases overall revenue as well
as gross margins.
Assisted Spotting Solutions may be installed on
existing equipment and can be integrated with
installed eet management system if desired
ASSISTED SPOTTING
SOLUTIONS

INTERLOPE AFRICA
REQUIREMENTS
1. A sufcient number of Wi-Fi
access points, whether owned by
you or by others, broadcasting a
signal in the area. Typically, the
system would work well if three or
more Wi-Fi access points are
“visible” at any given time. The
number of access points depends
on the dimension of the area and
on the accuracy required
• Any kind of Wi-Fi access point can
work
• They do not need to provide
connection
• They must broadcast a
detectable SSID
• You can also provide internet
connection using the access
points.
2. A oor-plan of the facility, of
each oor you plan to monitor. You
will have to upload the oor-plan
(PGN, GIF, JPG formats supported)
inside our dashboard, and
properly scaled.
WHAT YOU NEED TO DO
1.-An initial “site survey”, to collect
the ambient radio signals. This step
must be done using our mobile app
(ngerprinting).
2. To use our smart Wi-Fi tags:
- Provide a Smart Tag to each
person to track
-Attach a Smart tag to each asset
to track
The Smart Tags must be able to
connect to the internet through a
specic Wi-Fi network in order to
communicate to the server.
FEATURES: SMART WIFI TAGS
• Useful to track specic assets and
individuals.
• You can detect when they are in
motion and when they are still
• Create specic alerts when:
- A tag is moved
- The panic button is pressed
the tag falls (fall-detection)
- The battery level is low
• Many parameters can be set,
such as the scan rate, motion
detection, low battery level,
panic button behavior.
• Battery duration is about 25 days,
rechargeable.
• Tags are small and light.
WIFI
UNDERGROUND

Using Our Smart Wi Tags And Our Dashboard
• Track all the individuals carrying a tag, and all the
assets with a tag attached, in real time, on different
levels.
• Manage users, nodes, devices, oor-plans, levels.
• See when a tag is still or in motion.
• Register specic tag and assign a name and a
description to them.
• Track only specic devices, and exclude the others.
• See the last time a tag or a device has been
detected.
• Manage the general settings of your site.
LIMITATIONS
There are some limitations to keep in mind
• Only people/assets with a Smart Tag can be
tracked.
• If the network conguration of the network
changes, if a signicant amount of access points
are added, moved or removed, it might be needed
to re-train the site to keep the ngerprinting
database up to date.
• The max scan rate is 3 seconds, due to the time it
takes to scan W-Fi channels and connect to the
server.
• Smart Tags must always connect to the same
network (SSID) throughout the area to monitor.
Please be sure that the same network is available in
all the areas to monitor.
•Smart Tags operate in accordance to the IEEE
802.11 b/g protocol, therefore the network must
comply with this standard in order to allow them to
connect.
YOU CAN DEVELOP YOUR OWN DASHBOARD
ON TOP OF OUR API
Create Heat Maps.
• Perform historical analysis:
- Analyze dwell time, returning rate, bounce
rate, number of devices on site
- Make diagrams showing devices’ paths and
movements
• You can gather devices in different groups,
and lter them.
• Track devices individually.
• Analyze data coming from different
hours/days of the week/ month. AND
Measure the effectiveness of the layout of
your environment.
• Create specic geo-fences and divide the
environment in sub-zones, like aisles of a
supermarket, rooms of a building, shops of a
shopping mall, or sections of a museum. You
can set, for example: Restricted areas ,
Promotional areas And Temporary
exhibitions’ room
PRICING
Interlope Africa and IT Partners: on cloud
servers
The pricing is based on a monthly fee, which
depends either on the number of devices to
be tracked, or on the dimension of the area to
monitor.
There is an annual contract, for long-term
installations, and a month-to-month contract
for short installations and one-time events.
Enterprise Standalone Installation
We can also provide a standalone
installation, which is based on a local instance
running on an on-premise server.
WIFI
UNDERGROUND
INTERLOPE AFRICA

INTRODUCTION
Page 32
INTERLOPE AFRICA
TECHNOLOGY FOR THINGS
Interlope Mining Solutions trading as Interlope Africa is a mining solutions and supply company based in
Randfontein.
The company is 100% black owned entity and 50% female owned.
We have two directors who are:
Ms Mpho Thantsha:
Mr Thomas Mthoba:
The company has 5 sub-divisions which are: Belts and Conveyor, Electrical, Exploration,
Piping, and Mining Technology
Interlope Mining Solutions was formed to become the leading provider in mining solutions on the
continent.
Interlope Africa will Tailor make Cumulocity for your business
Cumulocity (Internet for Things) gives you fast visibility and control over your remote assets, be it machines
or any other assets that you need to control
Cumulocity provides:
Certified hardware kits and software libraries that allows you to bring remote assets into the cloud It runs on
all networks, mobile or fixed, no need to open your firewalls, no need to purchase additional VPN services
and reduces your mobile traffic using SmarREST by 80% over other HTTP APIS. In a nutshell just connect and
Go.
Proximity detection system for the mining industry
It works by establishing a magnetic marker field, or zone, around machinery using a device called the
generator (or proximity module depending on the mining type). One or more of these may be fitted onto
machinery to create fields designated as the 'warning zone' and 'alert zone'. This marker field can
encompass the entire machine and its turning radius, or be specific to certain areas.
Miners wear a personal-alarm device (PAD) that detects and measures the magnetic marker field to
determine their proximity to the machine, and alert them of possible danger to their safety. The PAD
attaches to the miners belt and has an optional clip-on 'warning module' that attaches to the hard hat
(country specific).
LETS TALK PDS
PROXIMITY
DETECTION SYSTEM

INTERLOPE AFRICA
As the miner enters the warning zone around the machinery, visual and audible alarms alert both the
miner and the machine operator. If the miner enters the alert-zone, HazardAvert can be programmed to
disable the machine completely.
HazardAvert can be used in surface and underground, coal and hard-rock applications. The core
technology of the system is consistent across all types of mining, but each system is specifically tailored
according to the mining type and application.
The HazardAvert system incorporates numerous key design features to ensure high reliability and
effectiveness, such as:
• HazardAvert, which can be installed on any and all types of mobile mining machinery and vehicles
• HazardAvert, which uses low-frequency signals that are not affected by the environment
or other objects
• Single, miner-worn PADs that work with all equipped machinery throughout the mine
• Enabling multiple machines and multiple miners to work closely without system conflict
• Allowing low-frequency signals to pass through almost anything, including coal, rock, dust and water
• Ability to be used in hard rock, coal and open cut applications
• Highly accurate and repeatable zones
• Zones may be shaped to suit equipment
A range of data recording and reporting tools include:
• Recording of all events such as miners entering and exiting zones
• Tracking of all miners in the vicinity, even if no alarms are triggered
• Enabling data to be downloaded to hand-held Bluetooth® device or streamed over wireless networks
• Safety data being retrieved for training purposes
HazardAlarm is a simplified, alarm-only proximity detection system that uses a single generator to create
an electromagnetic field around machinery that warns machine operators and individuals of a potential
for collision.
It is ideal for use on haulage type machinery that moves at higher rates of speed. Since it only uses a single
generator, it is a cost-effective, easy to install proximity detection solution.
If an individual is in the collision path of a piece of machinery, HazardAlarm will alert both the machine
operator and the individual. If the individual is in close proximity, but is not in danger of being struck, the
system will not alarm.
VISIBLE AND AUDIBLE ALARMS FOR MINER
AND MACHINE OPERATOR
HazardAlarm™
PROXIMITY
DETECTION SYSTEM

PIPING SYSTEMS
DIVISION
Page 34
INTERLOPE AFRICA
INTERLOPE
MINING
SOLUTIONS
PIPING AND
LOGISTICS
DIVISION
INTERLOPE IS TAKING AFRICA
Price(USD) Price(USD) Price(USD) CIF Durban,
South AfricaPump type Pump head attachment Motor
4/3C-AH 941 234
4 pole 5.5KW 241 1916
4pole 7.5kw 273 1949
6 pole5.5KW 284 1960
6pole 7.5KW 400 2076
4pole 11KW 400 2076
4pole 15KW 466 2142
4pole 18.5KW 591 2266
4pole22Kw 634 2310
4pole 30KW 831 2507
2pole 22Kw 613 2288
2pole 30Kw 809 2485
6pole 3KW 241 1916
6pole 4KW 263 1938
6pole 5.5KW 284 1960
4/3D-AH 1060 234
4 pole 5.5KW 241 2035
4pole 7.5kw 273 2068
4pole 11KW 400 2195
4pole 15KW 466 2261
4pole 18.5KW 591 2385
4pole22Kw 634 2429
4pole 30KW 831 2626
2pole 22Kw 613 2407
2pole 30Kw 809 2604
2pole 37Kw 897 2691
4pole37KW 1017 2812
4pole45KW 1127 2921
4pole55KW 1400 3195
2pole 45KW 1192 2987
2pole 55KW 1477 3271

INTERLOPE AFRICA
6/4D-AH 1868 391
4 pole 55KW 1400 5268
4pole 15KW 466 4334
4pole 18.5KW 591 4459
4pole22Kw 634 4502
4pole 30KW 831 4699
6 pole15KW 634 4502
6pole18.5 777 4644
6pole22Kw 853 4721
4 pole15KW 466 4334
4pole18.5 591 4459
6pole30KW 1127 4994
6pole37KW 1389 5257
4pole37KW 1017 4885
4pole45KW 1127 4994
6/4E-AH 1995 391
4 pole 55KW 1400 4286
4pole22Kw 634 3520
4pole 30KW 831 3717
4pole37KW 1017 3903
4pole45KW 1127 4012
4pole75KW 1824 4709
4pole90KW 2067 4953
4pole110KW 3325 6211
8/6E-AH 3921 547
4 pole 55KW 1400 6368
4pole75KW 1824 6792
4pole90KW 2067 7035
4pole110KW 3325 8293
8pole11KW 623 5591
8pole18.5KW 1006 5974
8pole22KW 1118 6085
8pole30KW 1389 6357
6pole30KW 1127 6094
8pole45KW 2002 6969
6pole30KW 1127 6094
6pole37KW 1389 6357
6pole45KW 1772 6739
6pole55KW 2013 6980
6pole75KW 3522 8489
8pole55KW 3216 8183
8pole75KW 3741 8708
6pole90KW 3741 8708
6pole110KW 4331 9299
8/6R-AH 4268 547
6pole132KW 4791 10105
6pole110KW 4331 9646
6pole185KW 6694 12008
4pole160KW 4331 9646
4pole132KW 4178 9493
4pole160KW 4331 9646
PIPING SYSTEMS
DIVISION

PIPING SYSTEMS
DIVISION
Page 36
INTERLOPE AFRICA
Application: Coal washer
processing, handling with the
ne ore and tailings in metal
mine, handing combined
bottom and y ash in a thermal
power station.
We sell quality, with the best prices
in the market
• Our products are manufactured
by experts, who have been in
the industry for years
• Our products are of high quality
currently used in various
countries which includes
Africa, USA, UK, UAE, Germany
and India
• Our products meet all global
certication standards
• WE don't have buyers! We have
partners
: We don't just sell, we work with
you.
10/8R – CM SLURRY PUMP
Application:
Coa l wa s her p roces s i ng,
handling with the ne ore and
tailings in metal mine, handing
combined bottom and y ash in
a thermal power station.
10/8E-CM SLURRY PUMP
PUMP SPARES

PUMPS
The Delta Force (R) series pumps are vertical, centrifugal slurry pumps
submerged in sump during operation. They are designed for delivering highly
abrasive, large particles and high density slurries. These pumps have no need of
any shaft seal and sealing water.
The pump casing of type Delta Force pumps are made of wear-resistant metal.
The wear parts are made of high chromium for the Delta Force series and are
rubber lined for the Delta Force R series.
40 PV SUMP
Type Delta Force CHH slurry pumps are cantilevered, horizontal, centrifugal
slurry pumps. They are designed for the handling of highly abrasive, high density
slurries in the metallurgical, mining, coal, power generation, construction
material and other industry.
The pumps of this type may also be installed in multistage series.
Page 37
INTERLOPE AFRICA

PUMPS
This pump is made of a single casing and it has a wide wet passage. The wet
parts are made of abrasion resistant chromium alloy. The discharge branch
pump can be oriented in any direction upon request. This type of pump is
abrasion-resistant, easy to install, and has good NPSH performance. Gravel
pumps are designed for the continuous handling of more abrasive slurries which
contain solids that are too big to be pump by other types of pumps. They are
suitable for delivering slurries in mining, explosive sludge in metal melting,
dredging in dredger and course of rivers, and other elds. The DTF-GH series
pump is high heat pump.
6/4D-DTF G Gravel Pump
Table
The DTF L(R) series slurry pumps are
cantilevered, horizontal, centrifugal, slurry
pumps. They are suitable for delivering less
abrasive, low dense slurry in the
m e ta l l u r g i c a l , m i n i n g, c oa l a n d
construction material industry. The shaft
seal is adopted both gland seal and
centrifugal seal.
50B-DTF L SLURY
PUMP
150 E-DTF
L SLURRY
PUMP
300S-DTF
L-SLURRY
PUMP
400S DTF
L-SLURRY
PUMP
Page 38
INTERLOPE AFRICA

Submersible
Pump
Electrical
Submersible Pump
Integrate
Electromagnetic
Flow meter
HDPE PIPES AND PIPES FITTING
Interlope offers a comprehensive range of
HDPE pipe and tting systems specically
designed for buried installations in gas
distribution applications.
Our HDPE Pipes are available in coil lengths
and are specied due to its exible
properties as well as its light weight and ease
of installation
Hydraulic Driven Top Discharge
Heavy Duty Slurry Pumps. It is the
hydraulic version of the Series Heavy
Duty Submersible Slurry Pump with
agitator. Ideal for applications
where electric power is not
available or variable speed is
needed for the application. It is the
choice of industries that face the
most difcult pumping.
LCD display , gallons: : Output
signal : 4-20m A :: Electrode : 316L
SS:: Power supply : 24 VDC::
Protection : IP 68:: Working
pressure 1.6MPa:: Temperature
:120C:: Lining Material : PTFE
Page 39
INTERLOPE AFRICA

PINCH VALVES
• SIZE 15MM TO 400MM –
• PRESSURE UPTO 25 BAR – IN CLOSED OPEN POSITION
• CYLINDER OPERATED PINCH VALVES
• Option – I 2 P CONVERTOR ALONG WITH POSITIONER- 4 TO 20 MA
• MANUAL OVER RIDE APPLICATIONS
Chemicals, Alkaline Mixtures Acids, Slurries intermediates,
Liquid Foods, Viscous uids,
Sludge’s, Granules
Dry Suspension
Powder Collectors
Gases
PNEUMATIC CYLINDER OPERATED PINCH VALVES
• SIZE 15MM TO 400MM –
• DRILLED TO ANY STANDARD – DIN, ANSI, BS, IS, OR AS REQUIRED.
• PRESSURE UPTO 25 BAR – IN CLOSED OPEN POSITION –
• SLEEVE OPTIONS – NEOPRENE, NATURAL, HYPALONE, EPDM, VITON,
• HIGH ABRASSION RESISTANT – SPECIAL INVENTED – HIGHLY ELASTIC,
SPECIAL EXTRA HIGH PRESSURE MOULDED (FIVE TIMES BETTER
ABRASSION RESISTANT LONG LIFE THAN ANY RUBBER SLEEVE)
MANUAL OPERATED PINCH VALVES
HDPE PIPES AND PIPES FITTING
Page 40
INTERLOPE AFRICA

ELECTRIC VALVE ACTUATOR
Page 41
INTERLOPE AFRICA

GATE VALVES
BALL VALVES
API Gate Valve
• Class 150 API Gate Valve
• Class 900~1500 API Gate Valve
• Class 2500 Gate Valve
• Class 900 Gate Valve
Hard sealing ball
valve
Size: 2'-32' Pressure:
150LB-2500LB Body:
f o r g i n g / c a s t i n g
C o n n e c t i o n :
 a n g e d / w e l d e d
Floating ball, full/reduced bore Anti-
Static device Anti-yout structure of
valve stem Fireproof structure *well
applicable to high temperature
working condition Top ange platform
in line with ISO5211
Our Gate valves products include Gate valve, American Standard
Gate Valve, API JIS Gate Valve, Api Gate Valve, Class 2500 Gate
Valve, Class 900 Gate Valve, Forged Steel Gate Valve, Gate Valve
Class 150, Parallel Slab Gate Valve Class 150, Stainless and Forged
Steel Gate Valve, Parallel Slab Gate Valve Class 600, Wedge Type
Flange Gate Valve. If you are interested in any of Gate valves
products or have a customized requirement to ll, please contact us
right now !
Gate Valve Size: 2'-48' Pressure: 150LB-2500LB Design and
manufacture conform to API 600,API 6D ASME 16.34 Test and
check conform to API 598, API 6D Remarks conform to MSS-SP-25
Adopt the following structure Full bore Flexible or rigid disc or soft seal
structure Self-centering gland Bolted bonnet, spiral would eight-
square gasket sealing bonnet or pressure seal bonnet. According to
the following standard Flange ends conform to ASME B16.5 ASME B
16.47A Butt-welding ends conform to ASME B 16.25. Face to face
dimension conform to ASME B 16.10,API 600,API 6D Operation type:
hand wheel, worm gear, bevel gear, electrical, pneumatic and
hydraulic etc
CUSTOMISE YOUR GATE VALVE WITH US
Orbit ball valve Size: 2'-32' Pressure:
150LB-2500LB Body: forged/casted
m a t e r i a l C o n n e c t i o n :
anged/welded Sealing: soft/hard
Full/reduced bore Anti-Static device
Fireproof structure *Hard sealing orbit
valve is the best choice under harsh
working conditions, such as high
tempreturepressure,or medium
solid particulate mater Top ange
platform in line with ISO5211
Page 42
INTERLOPE AFRICA

Interlope Mining Solutions Pty Ltd • 55 Park street • Randfontein • Johannesburg • South Africa
Tel: 011 692 4528 • Email: info@interlopeafrica.co.za • Web: www.interlopeafrica.co.za
GATE VALVES
Floating Ball Valve Size: 1/4'-10' Pressure: 150LB-2500LB Connection:
anged/welded Body: forging/casting material Structure: two-
pieces/three pieces Connection:anged/welded Full/reduced bore Anti-
Static device Anti-yout structure of valve stem Fireproof struture Anti-
leakage packing design Top ange platform in line with ISO5211
• Class 150 Full Bore Folating Ball Valve
• Class 300 Full Bore Folating Ball Valve
• Class 400~600 Full Bore Folating Ball Valve
• Class 150 Reduced Bore Folating Ball Valve
• Class 300 Reduced Bore Folating Ball Valve
• Class 400~600 Reduced Bore Folating Ball Valve
Trunnion Mounted Ball Valve
Size: 2'-48'
Pressure: 150LB-2500LB
Body: forging/casting material
Connection: anged/welded
Ball: Trunnion
Bore: full/reduced
Anti-yout structure of valve stem
Self-relieving structure
Two-blocking
Fireproof struture
Greasing system installed stem and seat(Diameter6'')
Vent valve on body(Diameter6'')
Support plate structure for forged valve(Diameter8)
Top ange platform in line with ISO5211
API Ball Valve API Trunnion Mounted Ball Valves
Trunnion Ball Valve
• Class 150 Full Bore Trunnion Mounted Ball Valve
• Class 150 Reduced Bore Trunnion Mounted Ball Valve
Pig valve
Size: 4'-24' Pressure:
150LB-2500LB
Body: forged/casted
material Connection:
anged/welded
Sealing:soft/hard Side-
entry/top-entry Anti-
Static device Electronic sensors device
Top Entry Ball Valve
Size: 2'-40' Pressure: 150LB-2500LB Body:
forging/casting Connection: anged/welded
Trunion ball, full/reduced bore Anti-Static device
Anti-yout structure of valve stem Fireproof
struture Greasing system installed on stem and
seat(Diameter6'') Top ange platform in line
with ISO5211
• Class 150 Top Entry Ball Valve
• Class 1500 Top Entry Ball
1-PC Thread Ball Valve with
Mounting Pad 2000PSI
2-PC Flanged Ball Valve
3-PC Thread Ball Valve with
Mounting Pad
Page 43
INTERLOPE AFRICA

BUTTER FLY VALVES
Bi-directional Hard Sealing Buttery Valve Size:DN50-
DN2000
Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40,P64,PN100
Body: Casting Material
Disc: Casting Material
Connection: Flanged, Welded, Wafer, Lug Wafer Metallic
sealing ring installed on the disc
Bi-directional hard sealing, Zero leakage.
BUTTER FLY VALVES
Size:DN50-DN4000
Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40,P64,PN100,PN150
Body: Casting Material
Disc: Casting Material
Connection: Flanged, Welded, Wafer, Lug Wafer Metallic sealing ring
installed on the disc Unidirection hard sealing, Zero leakage
• Triple Offset Buttery Valve
• High Pressure Buttery Valves
• Class 150 Triple Offset Wafe Buttery Valve
• Class 300-600 Triple Offset Wafe Buttery Valve
• Class 150 Triple Offset Flange Buttery Valve
• Class 300-600 Triple Offset Flange Buttery Valve
• Class 150LB Triple Offset Butt-welded Buttery Valve
• Class 300 Triple Offset Butt-welded Buttery Valve
Double eccentric buttery valve
Size: DN50-DN4000 Pressure:
PN2.5,PN6,PN10,PN16,PN25,PN40
Body: casting material
Disc: Casting Material Connection: Flanged,
Welded, Wafer,Lug Wafer Soft sealing-Non-metallic
sealing ring installed on the disc
Center line buttery valve
Size: DN50-DN1200
Pressure: PN6,PN10,PN16,
Body: Casting material
Disc: Casting Material Connection: Flanged, Wafer,
Lug Wafer
GET
Electric Buttery Valve
Pneumatic Hard Seal
Buttery Valve Work Wheel
Flexible Hard Seal Buttery
Valve Ventilating Buttery
Valve
Page 44
INTERLOPE AFRICA

Interlope Mining Solutions Pty Ltd
19 Crn Kruger and Human street • Office 103
Old Absa Building • Krugersdorp
Tel: 011 692 4528 / 011 660 7422
Fax is 086 218 7699
Email: info@interlopeafrica.co.za
Web: www.interlopeafrica.co.za

Interlope africa company profile

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Viewers also liked

Viewers also liked (10)

Similar to Interlope africa company profile

Similar to Interlope africa company profile (20)

Recently uploaded

Recently uploaded (20)

Interlope africa company profile