An embedded system is a controller programmed and controlled by a real-time operating system (RTOS) with a dedicated function within a larger mechanical or electrical system, often with real-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts.

1. WELCOME TO OUR
PRESENTATION

2. Presented By
Hasan Ahmed Khan 152-15-5587
Foysal Ahmed 152-15-5738
Tanvir Anjum 151-15-5158
Nadim Mahmud Nayem 152-15-5772

3. CONTROLLED CAR USING
ARDUINO

4. Motivation
 We tried to solve a real life problem using Embedded system
 What we studied in Embedded system that we tried to practically
implement

5. Objective
 We make a Bluetooth-controlled car which can be controlled through our
android mobile. Here only needs to touch button in android phone to control
the car in forward, backward, left and right directions. So here android phone is
used as transmitting device and Bluetooth module placed in car is used as
receiver. Android phone will transmit command using its in-built Bluetooth to car
so that it can move in the required direction like moving forward, reverse,
turning left, turning right and stop.

6. Requirment
 Arduino UNO
 Two wheel robot car chassis
 L298N-Motor controller.
 HC-05 Bluetooth Module.
 Power supply or Cell.
 Connecting wires

7. Budget
 Total cost of this project might be 2000-2500 BDT
 Arduino Uno-550tk
 Motor Driver-320tk
 Bluetooth module-400tk.
 Other requirements-1000tk

8. Challenges
 First of all it was a hard challenge for us to find out a good
project
 It will be also hard challenge for us for complete this
project in this short time

9. Future Works
 We will make this car in passenger car.
 We will use PIR sensor to this car this car can stop if
something it’s feel something like wall in the front.
 We will use speed controller for control the car’s speed.
 We will use GPS to find out this car’s location.