BIMLABS COURSE CATALOG

HeadOﬃce
Phone: +914712414143
+919745268888
E-mail: info@bimlabs.in
Web : www.bimlabs.in
CAD&BIM FinishingSchool
BIM Studio
COURSE CATALOG

CONTENTS
ABOUT US.........................................................................................................................................................................2
BIMLABS TEAM ............................................................................................................................................................ 3
AUTODESK AUTHORIZED TRAINING CENTER ................................................................................................ 5
INDIAN GREEN BUILDING COUNCIL MEMBER ............................................................................................... 5
KTU INTERNSHIP PROGRAMS........................................................................................................................... 6
CIVIL ENGINEERING .......................................................................................................................................... 6
MECHANICAL ENGINEERING...........................................................................................................................7
SIX MONTH INTERNSHIP PROGRAMS...........................................................................................................8
CIVIL ENGINEERING -DESIGN OF STEEL & CONCRETE STRUCTURES .......................................8
MECHANICAL ENGINEERING -DESIGN OF STATIC EQUIPMENTS................................................. 9
MECHANICAL ENGINEERING-PRODUCT DESIGN & CNC MANUFACTURING........................... 10
MASTER IN BUILDING INFORMATION MODELLING ...........................................................................11
CERTIFICATION PROGRAMS .............................................................................................................................12
ARCHITECTURAL BIM.......................................................................................................................................12
STRUCTURAL BIM..............................................................................................................................................12
MEP BIM.................................................................................................................................................................13
CONSTRUCTION MANAGEMENT BIM.........................................................................................................13
MEP HVAC SYSTEMS – DESIGN & DRAFTING.......................................................................................14
MEP - PLUMBING SYSTEMS – DESIGN & DRAFTING........................................................................15
MEP – FIRE PROTECTION SYSTEMS – DESIGN & DRAFTING........................................................16
AUTOCAD 2019.....................................................................................................................................................17
REVIT ARCHITECTURE 2019......................................................................................................................... 18
PRIMAVERA P6...................................................................................................................................................19
MICROSOFT PROJECT......................................................................................................................................20
REVIT MEP ............................................................................................................................................................21
MICROSTATION..................................................................................................................................................22
CREO PARAMETRIC / SOLID WORKS/ INVENTOR .............................................................................23
STAAD PRO V8i..................................................................................................................................................24
BIM STUDIO .................................................................................................................................................................25
BIM IMPLEMENTATION......................................................................................................................................25
BRIDGE -PLACEMENT CELL ..................................................................................................................................26

Kazhakkoottam, Thiruvananthapuram: 97452 68888, 9744 29 3003; info@bimlabs.in
Ernakulam 9539673518, 9846068486 Fb @bimlabs.in Web: www.bimlabs.in
2 | P a g e
ABOUT US
BIMLABS is an Engineering Firm Authorized by Autodesk for CAD, BIM, CAM, CAE
Training services. We are also a registered member of Indian Green Building Council for
promoting the Green building Initiatives. We are based out of Kazhakkoottam,
Thiruvananthapuram the IT spot of Kerala. We are trying to be a bridge between engineering
students and industry with our strong industry associations and tie-ups.
 BIMLABS have an association with Tridax Engineering Softwares Pvt. Ltd Cochin, the
Authorized Reseller for Siemens NX products, CSI ETABS & SAP2000, Trimble Sketch-Up,
Lumion and Various 3D Printers including Ultimaker & 3D Scanners.
 BIMLABS have joined hands with YSC Engineering Services Techno Park with a
Memorandum of Understanding for Project & Internship support for BIMLABS students.
 BIMALBS in associating with Intimate Machines Trivandrum for project support for
Mechanical Engineering Students in CNC & Manufacturing segment.
 BIMLABS have Memorandum of Understanding with Government ITI Attingal for
Imparting Value Added course in BIM & Digital Prototyping for Students.
TRIDAX ENGINEERING
SOFTWARES PVT. LTD.
YSC ENGINEERING
SERVICES PVT. LTD
INTIMATE MACHINES PVT.
LTD
1st Floor, CC 30/935 A (1), Muttunkal
House
Tripunitura Main Road, Vytilla,
Kochi-19
Module No:406(A),Fourth
Floor, Thejaswini, Technopark,
Thiruvananthapuram, 695581
Manvila Industrial Estate,
Manvila,
Thiruvananthapuram,
695011
http://www.tridaxsolutions.com http://www.yscindia.com/ Intimate Machines

3 | P a g e
BIMLABS TEAM
SHIJU SASIDHARAN DIRECTOR
Linked In Profile https://www.linkedin.com/in/shiju-sasidharan-a361674a/
ANIL KUMAR G TECHNICAL HEAD
Linked In Profile https://www.linkedin.com/in/anil-kumar-g-b17589154/
 Over 14 years of Industry Experience
 Worked in Saudi Aramco & Saudi Electricity Company
Projects.
 Autodesk Certified Instructor
 Autodesk Certified Professional for Revit , Revit MEP,
AutoCAD, AutoCAD Inventor & Fusion 360 ACU
 Attended Autodesk Trainings & Autodesk University
 PTC Certified Instructor –Creo Parametric
 Product Expertise: AutoCAD, Revit Arch, Revit MEP Micro
station, Primavera, Navisworks, Creo Parametric, Inventor,
Fusion 360 etc.
 Over 15 years of Industry Experience
 Vast Overseas Experience in Singapore & Saudi Arabia
 Autodesk Certified Instructor
 Autodesk Certified Professional for AutoCAD & Fusion 360
ACU
 Attended Autodesk Trainings & Autodesk University
 Played A Key Role in Design and Drafting of various
Mechanical Projects
 Product Expertise: AutoCAD, Creo Parametric, CATIA,
SolidWorks, Solid Edge, Rhinoceros, Fusion 360, Autodesk
Alias Design

4 | P a g e
NISHAD S Head - BIM Services
Linked In Profile
https://www.linkedin.com/in/nishad-s-979940a7/
SEENA S G Technical Engineer
Linked In Profile
https://www.linkedin.com/in/seena-s-g-7a9b7b162/
JIJI M JOHN Technical Engineer
Linked In Profile
https://www.linkedin.com/in/jiji-m-john-b470aa163/
JIBIN JACOB Technical Engineer
Linked In Profile
https://www.linkedin.com/in/jibin-jacob-5b7b86162/
MARIYA THAMPI Technical Engineer
Linked In Profile https://www.linkedin.com/in/mariya-thampi/
 Over 4 Years of Experience in BIM Training & Projects
 Expert in Construction Management & Project Management
 Implemented Primavera in Various Govt & Private Organizations.
 Autodesk Certified Professional –Revit Arch, Revit MEP, AutoCAD
 Certified BIM Professional from Autodesk.
 Product Expertise: AutoCAD, AutoCAD Electrical, Revit Arch, Revit
MEP, Primavera, Microsoft Project.
 Autodesk Certified Professional
 Product Expertise: AutoCAD, Sketch-UP, Revit Arch, 3Ds Max.
 Post Graduate in Structural Engineering
 Product Expertise : AutoCAD, Revit Architecture ,Revit Structure , STAAD Pro
 Graduate in Mechanical Engineering
 Product Expertise : AutoCAD, Solid Edge, NX , Fusion 360, 3D Printing Services
 Graduate in Civil Engineering & Diploma in Construction Management
 Product Expertise: AutoCAD, 3Ds Max, Revit, Sketch Up, Primavera.

5 | P a g e
AUTODESK AUTHORIZED TRAINING CENTER
Locate BIMLABS in Autodesk ATC LOCATOR
INDIAN GREEN BUILDING COUNCIL MEMBER
Stand out with an Autodesk Certification
Autodesk Online Examination
Autodesk Certified User
AutoCAD, Inventor,
Revit, 3DS Max, Fusion 360
Autodesk Certified Professional
AutoCAD, Autodesk Inventor,
Revit Architecture
Revit Structure, Revit MEP Mechanical
Revit MEP Electrical, 3Ds Max
Indian Green Building Council
The Indian Green Building Council (IGBC),
part of the Confederation of Indian Industry
(CII) was formed in the year 2001. The vision
of the council is, "To enable a sustainable
built environment for all and facilitate India
to be one of the global leaders in the
sustainable built environment by 2025".
The council offers a wide array of services
which include developing new green
building rating programmes, certification
services and green building training
programmes. The council also organizes
Green Building Congress, its annual flagship
event on green buildings.

6 | P a g e
KTU INTERNSHIP PROGRAMS
CIVIL ENGINEERING
1. CIVIL DRAFTING & DOCUMENTATION WITH AUTOCAD 2019
Course CODE : BM-CE-KTU-001
Course Name : Civil Drafting & Documentation with AutoCAD 2019
Total course Duration : 12 days
Internship Duration : 5 days
Internship Company : YSC Engineering Services
Internship Topic : Design of Steel & Concrete Structure
Course Certificates : Autodesk Course Completion Certificate
Internship Certificate
Eligibility : S2, S4, S6 – Civil Engineering, KTU Syllabus.
2. STRUCTURAL ENGINEERING WITH STAAD PRO V8I
Course CODE : BM-CE-KTU-002
Course Name : Structural Analysis & Designing with STAAD Pro V8i
Internship Topic : Design of Steel & Concrete Structure
Course Certificates : Course Completion Certificate for STAAD Pro V8i
Eligibility : S2, S4, S6 – Civil Engineering, KTU Syllabus.

7 | P a g e
MECHANICAL ENGINEERING
1. Mechanical Drafting & Documentation – AutoCAD 2019
Course CODE : BM-ME-KTU-002
Course Name : Mechanical Drafting and Documentation with
AutoCAD 2019
Internship Topic : Design of Static Equipments
Course Certificates : Autodesk Course Completion Certificate
Eligibility : S2, S4, S6 – Mechanical Engineering, KTU Syllabus.
2. Product Design & CNC Manufacturing – CREO
Course CODE : BM-ME-KTU-002
Course Name : Product Design & CNC Manufacturing – CREO
Internship Company : Intimate Machines Pvt. Ltd
Internship Topic : CNC Manufacturing
Course Certificates : Course Completion Certificate for Creo Parametric
Eligibility : S2, S4, S6 – Mechanical Engineering, KTU Syllabus.

8 | P a g e
SIX MONTH INTERNSHIP PROGRAMS
CIVIL ENGINEERING -DESIGN OF STEEL & CONCRETE STRUCTURES
1. UNITS & MEASUREMENTS.
2. SYMBOLS.
3. BASIC GEOMETRIC / MATHEMATICAL FORMULAE.
4. ABBREVIATIONS USED FOR DESIGN & DRAWING.
5. EXCEL WORKSHEET/SPREADSHEET PREPARATION.
6. NATIONAL & INTERNATIONAL CODES & STANDARDS USED FOR
RCC & STEEL DESIGN
 Indian codes: IS 800 for steel, IS 456 for RCC.
 American code: AISC for steel & ACI for concrete.
 Various BS codes (British).
7. BASIC SECTIONS/ PROFILES IN INDUSTRIAL USE
 Indian: ISMB, ISMC.
 European: IPE, HEA, HEB, UPN.
 American: W sections, S sections.
 UK: UB,UC,PFC.
8. MATERIALS & PROPERTIES
 ASTM Materials, S275, S355 acc. to Yield strength
calculations.
9. DESIGNING
 Basic Design Load & Calculations acc. to codes &
standards.
 Design Parameters, Design Formulae.
 Design Software - STAAD; Analysis & Design.
 Tabulation of design software output.
 Design Report Preparation.
10. DETAILING
 Design Software – Tekla; Detailing, Drawing Preparation.
 Basics of Reading Engineering Drawings (Input / Output).
 Error Correction in Drawings.
11. ESTIMATION
 Preparation of BOM.
 Man-Hour Requirement (Design & Detailing).
12. PROJECT MANAGEMENT
 Introduction of Project Management ( Detailing & Design)
 Exposure to Primavera P6.
COURSE CODE : BM-CE-INT-001
KEY SOFTWARES
AUTOCAD
MICROSTATION
PRIMAVERA
STAAD PRO
TEKLA
CERTIFICATION
AUTODESK CERTIFIED PROFESSIONAL
INTERNSHIP CERTIFICATE
COURSE CERTIFICATE
DURATION
Internship Duration : 3 Months
Software Training : 3 Months
Total Duration : 6 Months
INTERSHIP PARTNER
YSC ENGINEERING SERVICES PVT LTD
THEJASWINI, TECHNOPARK
THIRUVANANTHAPURAM

9 | P a g e
MECHANICAL ENGINEERING -DESIGN OF STATIC EQUIPMENTS
1. UNITS & MEASUREMENTS.
2. INTRODUCTION TO GEOMETRIC FORMULAE’S.
3. ABBREVIATIONS AND TERMS.
4. INTERNATIONAL CODES & STANDARDS USED IN INDUSTRY.
5. MATERIAL SPECIFICATION AS PER ASTM/ASME.
6. MATERIAL PROPERTIES
 Carbon Steel.
 Stainless Steel.
 Duplex.
7. INTRODUCTION TO STATIC EQUIPMENT
 Basic Parts & Attachments.
 Safety Factor.
8. UNDERSTANDING OF DESIGN INPUTS, DATASHEET,
SPECIFICATIONS AND STANDARD DRAWINGS.
9. UNDERSTANDING OF WELD SYMBOLS, JOINT
CONFIGURATIONS.
10. OVERVIEW OF GA DRAWINGS, FABRICATION DRAWINGS.
11. DETAILED ENGINEERING
TANK
 Tank design as per API 650.
 Preparation of Design Excel worksheet using API 650.
 Detailing and Drafting of Tanks.
PRESSURE VESSEL
 Exposure to Design Software - PV Elite.
 Detailing and Drafting of Pressure Vessel.
12. FINITE ELEMENT ANALYSIS
 FEA of Design parts of Equipment – Tank.
 FEA of Design parts of Equipment - Pressure Vessel.
13. ESTIMATION -
 Equipment BOM.
 Man-Hour Requirement (Design & Detailing).
14. PROJECT MANAGEMENT
 Introduction to Project Management Techniques in Design
Project.
 Primavera P6
COURSE CODE : BM-ME-INT-001
KEY SOFTWARES
AUTOCAD
MICROSTATION
PRIMAVERA
PV ELITE
FUSION 360
CERTIFICATION
 AUTODESK CERTIFIED
PROFESSIONAL
 INTERNSHIP CERTIFICATE
 COURSE CERTIFICATE
DURATION
Internship Duration : 3 Months
Software Training : 3 Months
Total Duration : 6 Months
PROJECTS
 Tank Design Project.
 Pressure Vessel Project.
INTERSHIP PARTNER
YSC ENGINEERING SERVICES
PVT LTD
THEJASWINI, TECHNOPARK
THIRUVANANTHAPURAM

10 | P a g e
MECHANICAL ENGINEERING-PRODUCT DESIGN & CNC MANUFACTURING
COURSE CODE : BM-ME-INT-002
AutoCAD
Preparation Mechanical 2D Drawings
& Documentation
CREO or NX
CAD/CAM
Product Design, Parts
Assemblies & Sheet Metal
Mechanism & Simulation
CAM – Virtual Manufacturing Methods
Fusion 360 Cloud Based CAD/CAM/CAE
Primavera
Project Management
Time Cost Resource
Material
Management
Raw Material Inward Management
Receiving & Identifying
the Materials
Planning
Purchase Department
Planning & Scheduling of Work
Machine Shop
Conventional Machine Shop
Managing Machining & Turning
CNC
Shop
CNC Milling & Turning
CNC Coding
Job setting and Machine operation
QC & QA
Quality Control Methods
Coordinate Measuring Machine
Quality Assurance Methods
Post
Processing
Fitting works
Post Manufacturing Process
Finished Product to Store
DURATION
6 MONTHS
CERTIFICATION
INTERNSHIP CERTIFICATE
DIPLOMA CERTIFICATE
AUTODESK CERTIFICATION
INTERNSHIP
INTIMATE MACHINES PVT. LTD,
THIRUVANANTHAPURAM

11 | P a g e
MASTER IN BUILDING INFORMATION MODELLING
CONCEPTUAL MODELLING
FORMIT 360
Massing Tools in Revit
DETAILED DESIGN – ARCHITECTURE
Preparing Architectural Modelling
Setting Building Levels & Grids
Creating Building Envelope
Placing Doors & Windows
Floors, Roofs, Stairs etc.
Creating User defined Families
Properties & Parameters
Celling & Placing Lights
3D VISUALIZATION- REVIT
3D Views & Camera Views
Rendering
Walkthrough & Export to Videos
Export to 3DS MAX
COORDINATION – REVIT
Linking Revit Files
Copy Monitor Tools
STRUCTURAL MODELLING – REVIT
Structural Views
Structural Beams & Columns
Beams & Framings
Foundations & Reinforcement
Floors & Shafts
Connections
Energy Analysis- Revit , A360
Creating Spaces and Zones
Creating Energy Model
Generating Energy Analysis Report
Autodesk GBS/Insight
MEP Modelling – Revit
Heat Load Calculations
Placing Air Terminals &
Mechanical equipment
Creating Duct Systems
Placing Plumbing Fixtures
Creating Plumbing Systems
MEP Views
ESTIMATION – REVIT
Creating Schedules
Material Takeoff
User Defined Fields
Exporting to excel
DOCUMENTATION- REVIT
Creating Section Views, Callout views
Creating Sheets & Placing Views
Exporting to AutoCAD
PROJECT MANAGEMENT- PRIMAVERA
EPS, WPS, Projects & Activities
Activity Relationships
Scheduling
Critical Path Method
Cost Analysis
Resource Management
PROJECT REVIEW- NAVISWORKS
Exporting Revit Files to Navisworks
Viewing Linked Models in Navisworks
4D SIMULATION- NAVISWORKS
Linking Revit Models & Primavera Data
Creating 4D simulation videos
CLASH DETECTION –NAVISWORKS
Creating Clash Tests
Evaluating Clash Results
Exporting Clash Results
QUANTITY TAKE OFF – NAVISWORKS
Items & Resource Manager
Export to Spreadsheets
MANAGING FILES IN CLOUD-A360
Cloud Integration
Cloud Rendering
Creating Projects and invite
Project Members
CONNECTED BIM- BIM 360
BIM Glue , BIM Field , BIM Docs
CERTIFICATION
Master in Building Information
Modelling
COURSE CODE : BM-BIM-001
COURSE DURATION : 6 MONTHS
DESIGN-PLAN-BUILD-OPERATE
Eligibility: Diploma/Degree in Civil or Mech.

12 | P a g e
CERTIFICATION PROGRAMS
ARCHITECTURAL BIM
Course Code BM-BIM-002
Course Name Architectural BIM
Course Duration 3 Months
Certification
Autodesk Course Completion
Architectural BIM
Eligibility ITI/Diploma/Degree – ARCH or CIVIL
Course Modules
Module Software
Conceptual Studies Formit 360
Conceptual Modelling Sketch Up
Architectural Modelling Revit
Visualization 3DS Max
Documentation AutoCAD
Generative Design Dynamo
Cloud Rendering A360
Design with Cloud AutoCAD Web & Mobile
STRUCTURAL BIM
Course Name Structural BIM
Certification
Structural BIM
Eligibility Diploma/Degree – CIVIL
Course Modules
Module Software
Architectural Modelling Revit
Structural Modelling Revit
Structural Analysis & Design STAAD Pro V8i
Generative Design Dynamo

13 | P a g e
MEP BIM
Course Name MEP BIM
Certification
MEP BIM
Eligibility Diploma/Degree – Mechanical/ Electrical
Course Modules
Module Software
Architectural Modelling Basics Revit
MEP Modelling Revit
MEP Fabrication Revit
Building Energy Analysis Autodesk Insight.
CONSTRUCTION MANAGEMENT BIM
Course Name CONSTRUCTION MANAGEMENT BIM
Certification
Construction management BIM
Eligibility Diploma/Degree – Civil/Mechanical/ Electrical
Course Modules
Module Software
Managing Building Modelling Revit
Project Management Primavera
Project Review Navisworks Manage
Clash Detection & Coordination NavisWorks Manage
Quantity Estimation Revit , Navisworks
Connected BIM BIM 360 Apps

14 | P a g e
MEP HVAC SYSTEMS – DESIGN & DRAFTING
Course Code : BM-MEP-001
HVAC SYSTEMS – DESIGN & DRAFTING
Duration 100 Hours Course Modules Theory, AutoCAD, Revit
Introduction to HVAC.
• Common HVAC Units
• Basic concept of refrigeration
• Basic Components of refrigeration
• Types of refrigeration cycles.
• Vapour absorption refrigeration
• Vapour compression refrigeration
system.
• Basic Concept of Air-conditioning
• Air-Conditioning System
•
•
•
• Package Air Conditioning Systems.
Study of Psychrometric Charts
• Dry Bulb Temperature
• Wet Bulb Temperature
• Dew Point Temperature
• Humidification
• Dehumidification
• Relative Humidity
• Humidity Ratio
Basic Components of Air-Conditioning
• Types of air conditioning.
• Air cooled system of air co
• Chilled water system of air
• Air water system of air conditioning.
• Direct refrigerant system of air
Conditioning.
Ventilation system.
• Components of Ventilation system.
Duct and Duct Systems
• Types Of duct Systems
• Duct Materials
• Duct Systems Components
• Supply Duct
• Return Duct
• Exhaust Duct
Equipments Used In HVAC
• Air-Side Components
• General Components
• Water-Side Components
Hydronic Systems
• Hydronic Piping Systems
Heat Load Calculations
Standards and codes used in HVAC.
Legends And Symbols
AutoCAD
• Drafting of HVAC Systems in AutoCAD
Revit
• Modelling of HVAC Systems in Revit

15 | P a g e
MEP - PLUMBING SYSTEMS – DESIGN & DRAFTING
PLUMBING SYSTEMS – DRAFTING & MODELLING
Duration 80 hours Course Modules Theory, AutoCAD, Revit
Concept of Plumbing system
• Types of Pipe materials
• Cold water supply systems
• Hot water supply system
Plumbing Fixtures
• Bathtubs
• Connectors
• Drains
• Drinking Fountains
• Emergency Fixtures
• Lavatories
• Showers
• Sinks
• Urinals
• Water Closets
Plumbing Accessories
Plumbing Fittings
Plumbing Valves
Sanitary Drainage System
• One pipe system
• Two pipe system
• Vent Pipe System
Storm Water Drainage System
Fittings used in sanitary system
Standards and codes used in Plumbing
AutoCAD
• Drafting of Plumbing Systems in
AutoCAD
Revit
• Modelling of Plumbing Systems in
Revit

16 | P a g e
MEP – FIRE PROTECTION SYSTEMS – DESIGN & DRAFTING
FIRE PROTECTION SYSTEMS DRAFTING & MODELLING
Duration 80 Hours Course Modules Theory , AutoCAD FPS , Revit MEP- FPS
Introduction To Fire Protection System
• Fire Protection Goals
• What Is Fire?
• Classification Of Fire
• Hazard Classification
• Types Of Fire Protection System
• Types Of Fire Suppression
Systems
• Water Based Fire Suppression
Fire Suppression Systems
• Hydrant System
• Sprinkler System
• Water Spray (Mist) System
• High Expansion Foam System
• Riser System
• Gas Based Fire Suppression
Systems
• Classification Of Fire
Extinguishers
• How To Use Fire Extinguisher
Fire Detection Systems
• Smoke Detector
• Heat Detector
Types Of Fire Alarm Systems
• Audible Alarms
• Visual Alarms
Equipments
• Accessories
• Cabinets
• Connections
• Fittings
• Pump
• Valves
Design Standards
Inspection, Testing, And Maintenance
Legends And Symbols
FPS Design Concepts
AutoCAD – FPS
Drafting FPS using Legends & Symbol
Revit MEP
Modelling of FPS in Revit MEP

17 | P a g e
AUTOCAD 2019
Course Name : AutoCAD Course Code : BM-FS-001
Course Duration : 60 Hours
Project Hours : 25 Hours
Design every detail with AutoCAD software
AutoCAD® software for 2D and 3D CAD is engineered for the future. Work with TrustedDWG™
technology, and collaborate across desktop, cloud, and mobile. Includes AutoCAD mobile app.
DRAFTING & DOCUMENTATION
Overview on Autodesk AutoCAD.
AutoCAD Workspaces & User
interface.
Drawing Templates.
File Management.
Commands & shortcuts.
Command line & Status bar
options.
Co-ordinate Systems: Cartesian &
Polar.
Absolute & Relative co-ordinates.
Units & Limits.
Basic Drawing tools
Measuring Tools.
Viewing the design.
Properties.
Modify Tools
Polylines, Region & Boundary.
Array types.
Managing Layers.
Drawing Properties.
Managing Blocks.
Text & Text Styles.
Dimension & Styles.
Multi Leader & Styles.
Table & Styles.
Hatches & Gradient.
Multi Lines.
THREE DIMENSION
MODELLING
3D workspace.
3D Views
3D Visual Styles.
Viewing 3D Objects.
3D Co-ordinates.
Primitives.
Boolean operations.
Extrude.
Revolve.
Sweep.
Loft.
Solid Editing.
Surface Modelling.
Rendering.
Walkthroughs.
PRODUCTIVITY TOOLS
A360 Features
Block Attributes.
Referencing Other
Drawings.
Dynamic Blocks.
Paper Space & Model
Space.
Annotation Scale.
Sheet sets.
Plotting of Drawings.
Drawing Standards.
Customizing AutoCAD.
New Line types & Hatch
pattern.
Creating Shapes & Fonts.
Managing other formats.
PROJECTS ACCORDING TO THE DISCIPLINE.
ARCH / CIVIL ENGINEERING: Preparation of
Building Floor Plans, Detailing Drawings,
Corporation Approval Drawings. 3D building Design.
MECHANICAL ENGINEERING: Mechanical 2D
Drawings, HVAC Layouts. Piping Drawing, Isometric
Drawings, Modelling of Mechanical Assemblies etc.
ELECTRICAL ENGINEERING: Preparation of
Building Electrical Systems Layouts, Lighting
Layout, and One line diagrams, Schematic Drawings.
Schedules.

18 | P a g e
REVIT ARCHITECTURE 2019
Course Name : Revit Architecture Course Code : BM-FS-002
Building Information Modelling
 Building Information Modelling for
Architectural Design
Revit Architecture Basics
 Exploring the User Interface
 Working with Revit Elements and
Families
 Starting a Project
 Importing CAD Data
The Basics of the Building Model
 Creating and Modifying Levels
 Creating and Modifying Grids
 Adding Columns
 Creating a Basic Floor Plan
 Adding and Modifying Walls
 Working with Compound Walls
 Using Editing Tools
 Adding and Modifying Doors
 Adding and Modifying Windows
Viewing the Building Model
 Managing Views
 Controlling Object Visibility
 Working with Section and Elevation
Views
 Creating and Modifying 3D Views
Using Dimensions and Constraints
 Working with Dimensions
 Applying and Removing Constraints
Developing the Building Model
 Creating and Modifying Floors
 Working with Ceilings
 Creating Openings
 Adding and Modifying Roofs
 Creating / Editing Curtain Walls
 Adding Stairs, Railings and Ramps
Landscaping
 Topo surface & Landscaping Tools
 Creating / Modifying Topographic
surface
Conceptual Design
 Working with Mass Shapes
 Converting Mass Shapes to Building
Components
 Conceptual Energy Analysis
Detailing Your Design
 Creating Callout Views
 Working with Text and Tags
 Working with Detail Views
 Working with Drafting Views
Documenting / Annotating Your Design
 Creating and Modifying Schedules
 Creating Rooms / Area Tags and Schedules
 Creating Legends and Keynotes
Presenting the Building Model
 Drawing Sheets & Prints
 Lights , Materials
 Rendering & Walkthroughs
 Sun and Shadow Settings
 Title blocks
 Managing Revisions
 Creating DWF files
Linking & Exporting Files
 Linking Revit Projects
 Importing CAD Files
 Exporting to External Files
Working with Families
 Understanding Family Editor
 Creating / Editing Family Component
 Creating Door Family
 Window Family Creation
 Creating New Furniture Family
 Lighting Fixture Family
 Face based family
Autodesk 360
 Cloud Rendering
 Building Energy Analysis

19 | P a g e
PRIMAVERA P6
Course Name : Primavera P6 Course Code : BM-FS-003
PPM CONCEPTS
ORGANIZATION BREAKDOWN
STRUCTURE – OBS
• Different Views
• Create new OBS
ENTERPRISE PROJECT
STRUCTURE EPS
• Different Views
• Create new EPS
• Assigning the responsible
manager
• Difference between EPS &
OBS
PROJECTS
• Over view of the project
• Creation of new project
through wizard
• Creation of new project
through details
CALENDAR
• Modification of calendar
• Assigning calendar to new
project
ACTIVITIES
• Entering Activities through
Wizard
• Entering Activities through
details
• Duration format
• Activity type
• new column
• Time scale adjustments
• Relationship
• Linking
• Critical Path
• Editing Task Link
• Applying Different
Calendars
CONSTRAINTS IN A PROJECT
• Different Type of
constraints
• Use of secondary
constraints
WORK BREAKDOWN
STRUCTURE-WBS
• What is WBS
• Examples for WBS
• Applying WBS for Task
ACTIVITY CODE
• Code definition
• Assigning code and
organizing
• Reorganizing
PROJECT CODES
• Code Definition
• Assigning Codes and
Organizing
• Reorganizing
RESOURCE CODE
• Code Definition
• Assigning Codes and
Organizing
• Reorganizing
WORK PRODUCTS AND
DOCUMENTS
• Defining WPs & Docs
• Assigning
CURRENCY
• To change the currency
• To new currency
• Setting exchange rate
ROLES
• Importance of role
• Defining the roles
RESOURCE
• Defining resource through
Wizard
• Unit of measure
• Resource Type
• Effective Date
• Price
• Assigning resources
• Resource through roles
• Analysis of Resource
• Resource usage profile
• Resource usage spread sheet
• Resource curves
• Resource leveling
• Manual leveling
• Automatic leveling
UPDATING PROGRESS
• Setting database
• Actual start
• Actual finish
• Threshold
• Issue
• Risk
• Expense
• Claim digger
• Earned value analysis
• Filter
• Global change
• Reports
• Tabular
• Graphical
• Import
• Export
• User defined fields
• Print preview
• Publish

20 | P a g e
MICROSOFT PROJECT
Course Name : Microsoft Project Course Code : BM-FS-004
PROJECTS
• Over view of the project
• Creation of new project though
details
• Calendar
• Modification of calendar
• Assigning calendar to new project
• Entering Activities through details
• Duration format
• Activity type
• New column
• Time scale adjustments
• Relationship
• Linking
• Critical Path
• Editing Task Link
• Applying Different calendars
CONSTRAINTS IN A PROJECT
• Different Type of constraints
• Use of secondary constraints
PROJECT SUMMARY
• Indent
• Out dent
WBS
• Code definition
• Assigning code
• Highlight activities
• Currency
CURRENCY
• To change the currency
RESOURCE
• Defining resource
• Unit of measure
• Resource Type
• Price
• Assigning resources
• Analysis of Resource
• Resource usage profile
UPDATING PROGRESS
• Split task
• Setting database
• Baseline
• Actual start
• Actual finish
• Compare project
• Earned value analysis
• Filter
• Reports
• Print preview

21 | P a g e
REVIT MEP
Course Name : Revit MEP Course Code : BM-FS-005
1. INTRODUCTION TO REVIT
• Creating Levels & Grids
• Building Envelopes: Walls, Roof, Floors
• Basic Drawing and Editing Tools
• Leed Openings: windows, Doors, Ventilators
• Placing Columns
• Annotations: Dimensions ; Tags
• Views ,Visibility Graphics
2. INTRODUCTION TO REVIT MEP
• Overview of the Revit MEP Interface
• Opening a Revit MEP Project
• Viewing Commands
3. STARTING REVIT MEP PROJECTS
• Starting Revit projects
• Linking Revit models
• Copying and monitoring linked files
• Setting up levels
4. AUTODESK REVIT MEP SYSTEMS
• About Revit MEP Systems
• Working with Components
• Creating Systems - Overview
• System Graphics
• Connecting Components
• Analysing Systems
5. SPACES AND ZONES
• Creating spaces
• Creating zones
• Creating colour schemes
6. PERFORMANCE ANALYSIS
• Introduction to energy analysis
• Preparing energy analysis
• Analysing the heating and cooling loads
• Exporting for secondary analysis
7. HEAT LOAD CALCULATION
• Heat Load Calculation
8. HVAC SYSTEMS
• About HVAC systems
• Adding terminals and mechanical Equip.
• Adding ductwork
• Creating duct systems
• Automatic ductwork layouts
•
9. HYDRONIC PIPING SYSTEMS
• About Hydronic piping systems
• Adding mechanical equipment
• Drawing piping
• Creating Hydronic systems
• Automatic piping layouts
• Analysing piping systems
• Fire protection systems
10. PLUMBING SYSTEMS
• About plumbing systems
• Adding plumbing fixtures
• Drawing piping for plumbing systems
• Working with Plumbing Systems
11. ELECTRICAL SYSTEMS
• About electrical systems
• Placing electrical components
• Creating electrical circuits
• Cable trays and conduit
12. CONSTRUCTION DOCUMENTS
• Setting up sheets
• Placing and modifying views on sheets
• Printing sheets
13. ANNOTATING CONSTRUCTION
DOCUMENTS
• Working with dimensions
• Working with text
• Adding detail lines and symbols
• Creating legends
14. TAGS AND SCHEDULES
• Adding tags
• Working with schedules
• Creating schedules
15. DETAILING IN REVIT MEP
• Setting up detail views
• Creating details
• Annotating details.
16. DESIGN TO FABRICATION
• Import and Manage Fabrication
Components to Revit.

22 | P a g e
MICROSTATION
Course Name : MICROSTATION Course Code : BM-FS-006
• Introduction to Micro station & Bentley
• Opening a new file in Micro station
• About Seed files
• User Interface
• Design file settings
• Snap Settings, View Attributes
• Creating Linear Elements
• Locks
• Creating Circles & Ellipses
• Creating Polygons
• Manipulating tools
• Modify tools
• Texts, Text Styles, Text Editing tools
• Patterns
• Dimensions, Styles
• Creating Cells
• Managing Levels
• Change Attributes
• Groups
• Measure tools
• Working with Tags
• Working with Fences
• Accudraw settings
• Shortcuts & function keys
• Working with references
• Selection & filtering options
• Working with References.
• Creating views.
• Working with Macros.
• Importing and exporting to 3D .dgn
• Converting AutoCAD Drawings
• Applying CAD Standards
• Managing standards
• Micro station 3D Seed
• Creating Primitives
• 3D Modelling Tools
• 3D Editing Tools
• Visualization Tools
• 3D Pdf

23 | P a g e
CREO PARAMETRIC / SOLID WORKS/ INVENTOR
Course Name : CREO/Solid works/ Inventor Course Code : BM-FS-007
1. Parametric Modelling Concepts.
• Understanding solid modelling process
• Understanding feature-based concepts
• Understanding parametric concepts
• Understanding associative concepts
• Understanding model-centric concepts
• Recognizing file extensions
2. User Interface
• Managing Projects
• User Interface
• Managing Views & Object Display
3. Managing Geometry Features
• Model Tree
• Datum Features , Planes, Axes, Points
4. Sketching Objects
• Sketching Objects
• Geometric & Dimensional Constraints
5. Sketch Based Modelling
• Extrude, Revolve, Sweep, Blend etc.
• Material Addition & Removal
• Managing Depth/ height Options
6. Modelling Tools
• Creating Holes , Patterns
• Chamfer, Fillets
• Drafts, Ribs
• Sweeps with variable sections
• Advanced Sweep and Blend Options.
7. Advanced Modelling Techniques
• Grouping, Copy, Mirror
• Replacing Features
• User Defined Features
• Relations, Parameters & Family Table
8. Assemblies
• Top Down Assemblies
• Bottom Up Assemblies
• Assembly with Constraints &
Connections
9. TOP Down Assembly
• Creating Top Down Assemblies
• Skeletons
10. Sheet Metal
• Sheet Metal Design Process
• Primary& Secondary Wall Features
• Bending & Unbending
• Die & Punch Features
11. Mechanisms
• Creating Mechanisms
• Animating Assemblies
12. Visualization of Assemblies
• Rendering & Presentation
13. Drafting & Documentation
• Creating Views
• Sections & Detailed Views
• Dimensioning
• Setting Geometrical Tolerances
• Surface Finish Symbols
• BOM Balloons
• Exporting to CAD
• Relations, Parameters & Family Table
14. Overview of Manufacturing
• Casting & Molding
• Machine Shop Manufacturing
• CAM & CNC Methods
15. 3D Printing Technology
• Preparing Model for 3D Printing.
16. Export to Other Formats
• Import & Export 3rd party file formats
COURSE PROJECT

24 | P a g e
STAAD PRO V8i
Course Name : STAAD PRO V8i Course Code : BM-FS-008
 USING THE GUI TO GENERATE THE GEOMETRY (PRE PROCESSOR)
o The general STAAD Pro Environment
o Using the drawing tools for creating nodes and beams
o Generation methods such as copying /mirroring, rotating.
o Using Spread sheets
o Tools for Visualization of the model – Panning , zooming, viewing from various
angles , using multiple views and windows , renumbering entities
o Examining the tools for checking structural Integrity
o Understanding the STAAD input file using STAAD Editor
o Generating models using the structure wizard
 Using the GUI to generate a complete STAAD Model (Pre Processor)
o Building a truss model using the drawing tools and structure wizard
o Creating groups
o Understanding the various property types, the steel section database
o Creating and assigning properties from the steel tables
o Material Constraints
o Understanding beta angles ,local vs global axis , visualization using 3D diagrams
o Specification such as member releases, member offsets, tension only/ Compression
only members, cables etc.
o Understanding and creating various support types
o Understanding and Specifying various primary load types
o Creating load Combinations
o Performing a general elastic analysis
 Understanding the Results and Post Processing
o Viewing results the STAAD output file
o Using the Graphical post processor for Verifying and validating the analysis results
o Using the query analyzer
o Creating customized reports, plotting result diagrams
o Exporting results to other programs, printing
o Specifying design parameters
o Code Checking
o Member selection
o Grouping and physical member design
 Designing
o Specifying design parameters as per IS: 456 & IS : 800
o Designing beams & Columns as per IS 456
o Designing Steel Structure as per IS 800
o Using the interactive design for steel and concrete structures

25 | P a g e
BIM STUDIO
BIM IMPLEMENTATION
BIMLABS Provides Expert Assistance to Architects, Builders, Contractors
who need to implement BIM in their projects. We Work closely with the design
team of Clients by providing support for Setting up BIM Standards, BIM Modelling,
Family Creation, As-Built Model Updating etc.
BIMLABS also provides Other Engineering Services like CAD Drafting, 3D
CAD Modelling, Project Management Assistance, Visualization Jobs etc.
We successfully Completed Training on BIM in, Stapati, Calicut the leading
Architects in Kerala.

26 | P a g e
BRIDGE -PLACEMENT CELL
BIMLABS in a Mission to provide Placement for Qualified Students undergoing
Training From Our Institute. Also we are offering Placement Assistance to
Engineering Professional who are well versed in CAD & BIM.
Candidates can send their CVs to bridge@bimlabs.in

HeadOﬃce
Phone: +914712414143
+919745268888
E-mail: info@bimlabs.in
Web : www.bimlabs.in
CAD&BIM FinishingSchool
BIM Studio

BIMLABS COURSE CATALOG

Recommended

Recommended

More Related Content

Similar to BIMLABS COURSE CATALOG

Similar to BIMLABS COURSE CATALOG (20)

More from BIMLABS GLOBAL

More from BIMLABS GLOBAL (11)

Recently uploaded

Recently uploaded (20)

BIMLABS COURSE CATALOG