1. Shaik Shafi
Al-Adama,18th
street,Dammam
Kingdom of Saudi Arabia
E-Mail: shaikshafi83@gmail.com
E-Mail: shaikshafi21071983@gmail.com
Mobile: +966 548868154 (Saudi Arabia)
Mobile: +91 98408 48626 (India)
Post Applied for : Sales & Services Manager (Oil & Gas) / Business Development Manager
Objective :
To work ina challenginganddynamicenvironmentinthe Oil &Gas Businesstoemphasize and promote
the Company Sales on the New Products and services on the sold products and to achieve the
predefined target with the expertize knowledge and sophisticated methods.
Experience summary :
11.6 yearsof solid experience inthe Drilling(oil &gas) inbothinternational & domestic assignments, in
a wide variety of roles encompassing field maintenance engineer, Continuous improvement expert,
Asset Maintenance Engineer, PMS coordinator and possess a wide range of knowledge on PMS
(Preventive Maintenance System), QMS (Quality Management System), HSEMS (Health, Safety &
Environment Management System), Warehouse-Supply chain management system & Project cost
control.
Maintenance & Repair operations Management of 28 onshore (3000 HP, 2000 HP & 1500 HP) and 2
offshore Jack up rigs (2000 HP) in Saudi Arabia under Client Aramco with advanced Maintenance
techniques with efficient cost optimization and operational excellence.
Providestechnical andoperational direction to Maintenance Section Leaders (Mechanical & Electrical)
of onsite rig resources to keep up the rig site equipment’s in a high operational condition.
Establishedthe PMS(AMOSsoftware) inSaudi Arabiaonshore &offshore rigssuccessfullywithefficient
usage of the system to comply with the client ARAMCO requirements.
Expertise in handling and monitoring the CAT IV drilling equipment’s Maintenance execution and
records.
Academic Profile :
Bachelorof Engineeringin Mechanical EngineeringfromAnnaUniversityaffiliatedCrescentEngineering
college from 2001-2005 with an aggregate of 70.33 % at Chennai, India.
2. Key skills & Experience:
Oil & Gas (Petrochemical) & Drilling industry offshore & onshore exposure in operations and
Maintenance.
Full awareness of Maintenance practices as per OEMand API regulations of drilling equipment’s
Optimizationtechniquesonthe (Non-productivetime) by effective Failure analysis of Equipment’s
and the corrective actions implementation.
Troubleshooting skills on the mechanical equipment’s.
Budgetaryplanning&Maintenance co-ordinationforall the Major maintenance activities of all the
drilling equipment’s.
Budgetary planning for the contractual upgradation of rigs as per the client requirement.
Maintenance reports preparation and verification for the Major 5 years / CAT IV equipment's after
overhaul.
Schedule G requirements of Client Aramco and compliance.
Possess Good awareness on the ARAMCO HSERM & SWIMdocuments & Requirements.
Sound knowledge of Maintenance frequencies and Category inspections of all the drilling
equipment’s used at rig sites.
KPI reports preparation for maintenance management, Budgetary control expenditure of assets.
Audit control & corrective actions implementation at rig sites and base as per the company
requirements and client requirements.
Sound knowledge and drawing reading skills for all the drilling equipment’s.
Sound knowledge and Hands on experience with onshore & offshore Drilling rig equipment’s and
their spare parts.
Good awareness on IWCF theoretical knowledge and drilling process.
Sound knowledge on well control equipment’s and their parts requirement to comply API
regulations.
People Management and skills evaluation of the Maintenance staff and subordinates.
Maintenance reports preparation for the Major & critical maintenance activities and assisting the
junior engineers in reports preparation.
Expertize knowledge on SAP MM module, SAP Business warehouse and CMMS (computerized
Maintenance Management System).
Excellentrelationshipbuilderwithsuccessinformingstrong,sustainable relationships and securing
consensus among cross-functional team member for key initiatives.
Systematic control and authorization of Purchase requisitions for the new Asset purchases.
Excellent analytical skills and advance level knowledge in Microsoft office & Access and possess
good presentation skills.
Good communication and influential skills on all levels.
Company procedures development and implementation in the organization to ensuing the
procedures adapted to the required levels to witness results.
Professional Experience :
Nov 2016 – till date : Limra Exproof Solutions
Designation : Sales & Services Manager
March 2010 – Oct 2016 : Saipem Saudi Arabia (www.saipem.com )
Designation : Maintenance Manager
3. Department : Drilling Asset Technical & Planning department
May 2007 –Feb 2010 : Saipem Saudi Arabia (www.saipem.com )
Designation : Maintenance Engineer (Rigs and workshop support)
Department : Drilling Asset Technical & Planning department
About Saipem
Saipem is a leader in the oil & gas Drilling& construction business sectorswhich has biggestfleet of 120 onshore
rigs and 22 offshore rigs which includes drill ships,submersible,semisubmersibleand jack up rigs.
Saipem is an important international company, with a presence on five continents and more than 180 branches
and subsidiaries.
Duties & Responsibilities (Assets & Maintenance):
To apply the preventive, predictive and RCM (Reliability centered maintenance) techniques in
managing the life cycle of the assets.
To monitorthe maintenance activitiesof the operational critical equipment’s and reports creation /
approval of reports prepared by the other engineers.
To review the jobs carried by the third party service company and approval of inspection reports.
Review and approval of MOC (Management of Change) in order to Modify the Maintenance plans
based on the suggestions from the field maintenance engineer‘s and based on the studies and
corrective actions that are conducted through RCM& FMEA techniques.
To ensure the effective utilizationof the CMMS (Computerized Maintenance Management system)
by all the users involved in it.
To train the subordinates on the CMMS system and software system to the efficient usage.
To reviewthe Maintenance Bulletin’s and coordinating to implement the OEMrecommendations.
To involve the OEM for analyzing the technical reasons for equipment failure and identifying the
root causes to implement the corrective actions.
To Supportwarehouse inmanaging the Critical sparesof drillingequipment'sby the proposals of the
minimum and maximum levels in the MRP system.
Preparationof KPIto monitorthe trendsandsubmissionof maintenance management KPI to Client
ARAMCO and corporate office.
To ensure Preventive Maintenance Plans of all equipment’s are implemented in CMMS ( SAP &
AMOS)
To ensure Preventive Maintenance work orders are attended on rigs and workshop timely.
To Maintain and Monitor all the Lifting gear items through PMS.
Spare parts kit identification for Major overhauls and linking to the maintenance work orders to
enable the advance planning of spares for the critical equipment's.
To keep track of all equipment’s maintenance status which are sent out for maintenance by
communicatingwiththe service providerand visitingthe thirdpartspremisesforthe inspection and
review of job completion phases.
To maintain the Maintenance records of Preventive maintenance, Breakdown maintenance and
Major maintenance in the Amos system.
On call Maintenance support to rig sites, drilling engineers, rig supervisors, rig managers and
operation managers.
4. To Control & Monitor the Assets & its movements between the rig sites and base and keeping the
records up to date in the SAP system.
To Control & Monitor the Intercompany sale of Assets between the Countries while arriving and
leaving the country.
Providingthe investmentsspentonthe equipment’s the ProjectCostControl &Finance department
for the purpose of capitalization.
Organizingthe annual Assetinventoryof all the rigsites and base and submitting the reports to the
finance and corporate office.
Identifying the Assets which are uneconomical for repair and organize the Scrap proposal and
approvals from the corporate office.
Collecting the New asset purchase requirements from the rig sites and organizing the process of
asset purchase through SAP system.
Ensuringthe Assetplatesonall the assets in coordination with Asset officers at all the rig sites and
base yards.
DevelopMaintenance/Spare Part/Lubrication Operability and Maintainability plans as required by
the project.
Successfullymanagedthe AuditorsfromMODUSPECthat was engagedbySaudi Aramco national oil
companyto overviewthe complete performanceinall the areasof drillingbusiness for the purpose
of rating the contractors.
To co-ordinate with the internal and external auditors to verify the compliance of Maintenance
systems and methodologies.
To attend the operational meetings with Rig Managers and supervisors and to assist the
Maintenance needs of rigs with the available resources.
To attend the meetings with procurement department and vendors to clarify the technical
requirements of the Rig equipment’s purchase.
Successfully managed to clear the rig acceptance audits for the clients ARAMCO & SRAK (SHELL) as
per the contractual terms.
Frequent site visits to perform the Random inspection of Maintenance carried and to cross verify
the PMrecords.
Supporting the internal Maintenance teams in trouble shooting of equipment’s and during the
failures.
Supporting the Drilling Contractors for any frequent failures of equipment's and providing the
solutions to avoid the reoccurrence.
WeeklyPMSoverdue situationmonitoringandinvolvingthe concernedpersonnel’s to expedite the
closing of work orders timely.
Duties & Commitment towards QHSE:
Promotingandmotivatingthe Maintenance Sectionleadersandworkersto write the stop cards
or Hazard observation cards.
Motivating to stop the Unsafe acts and Unsafe conditions in the work environment
Implementation and monitoring of Drops inspections in the PMS
Implementation and Monitoring of PRV register updation and recertification through PMS.
Part of investigation team during any incidents involving the equipment failures
Coverage of all the Safety critical equipment’s Managed at rig site in the PMS with a special
identity and monitoring of the completion status.
5. Implementation of PTW & LOTO linked with PM system and traceability of PM work orders
managed with PTW & LOTO.
Skills Acquired & Equipment’s Handled
Expertize knowledge and experience on the below mentioned equipment’s
Top Drives (5000 & 7500 PSI working pressure)
Maker : Canrig, Models : 1250AC-681,1035AC-500 & 8050AC-712)
Maker : Varco, Models : TDS9S,TDS9SA,TDS-11SA, & TDS-11SH)
Maker : NOV, Models : HPT-06-500-2AC-SG-TT,HPT-500-2E-EAC-SG)
Mud Pumps (5000 & 7500 PSI working pressure)
Maker : National, Model : 12-P-160)
Maker : Drillmec, Model : 12T1600)
Maker : Contin.Emsco, Model : FB1600)
Maker : LTI – Lewco Letourneau technologies, Model : WH-1612)
Drawwork (2000 HP & 1500 HP)
Maker : National, Model : 1320UE & 110UE )
Maker : NOV, Model : D2000UEDB)
Maker : IDECO, Model : E2100)
Maker : WIRTH, Model : GH-2000EG-DC-2G LV)
Maker : LTI – Lewco Letourneau technologies, Model LDW1000K)
Maker : DRILLMEC – MAS 7000)
Rotary table (37.5 Inch & 650 Tons)
Maker : National, Model : C 375 & RT/ZP-375 )
Maker : American Block, Model : RK 37.1/2)
Maker : Ideco, Model : 375 E )
Maker : Wirth, Model : RTSS 37.1/2)
Crown Block, Travelling Block, Travelling block hook & Dead line anchor (500 & 650 tons)
Makers : National, Pyramid, Drillmec, Masserenti, NOV, Lee C More, LTI – Lewco Letourneau
technologies, Drilling structures, KERUI Petroleum Equipment)
Main Diesel Engines 1200 HP, 1200 RPM
Maker :Caterpillar, Model : D 398, D399 & 3512)
Camp Diesel Engines
Maker :Caterpillar, Model : 3412,3408,3406 & C 18)
Maker :Perkins, Model : 2806C-E18TAG1A & 2306A-E14TAG1)
Maker :Cummins, Model : NT855G-6)
BOP stack equipment’s (API Monogrammed) Annular, single & double 11",
13.5/8",18.3/4",21.1/4",26.3/4" & 30" (5K & 10K)
Maker :Cameron, Annular Model : DL, Single & Double BOP Model : U)
Maker :Hydril, Model : GK,GL,MSP)
Maker :Shaffer, Model : Spherical)
Bop Accumulator system (360 Gallons, 540 Gallons)
6. Maker : CAD Control Systems, Koomey, CPC-ConsolidatedPressurecontrol, NOV-SARA, Top oil field
engineering
BOP Lifting Hoist (50 Tons, 75 Tons & 100 Tons)
Maker : J.D NEUHAUS , Model : EH 37
Maker : Ingersoll Rand, Model : BS75LCH3P3E6M5/6745
Maker : NOV, Model : E-C24762-122-BH
Well control equipment's (5000 Psi & 7500 Psi)
Choke Manifold & Valves
Stand pipe manifold & Valves
Ground manifold & Valves
Mud system Equipment’s
Mud tanks & Mud agitators, Mud MixingPumps, SuperchargerPumps, Shale shaker & Mud Cleaner
Winches (Air hoist)
Man rider winch, Rig floor winches, Casing stabbing board winch, Chemical/Super sack lifting
winches
Pipe Handling Equipment’s
Pipe spinner, Iron roughneck, Catheads, Manual tongs, Power tongs, Elevators, Slips.
Engine room equipment’s
Air Compressors (mechanical & Electrical), Air dryers, Cold start up compressors, Air receivers,
Power control room (SCR & VFD),Emergency generators.
Other Equipment’s Awareness
All kinds of Centrifugal, Reciprocating and air operated pumps
All kinds of Centrifugal, Reciprocating and screw compressors
All kinds of Mobile Equipment’s like welding machines, tower lights,Cranes..etc.
All kinds of Safety valves, FOSV and Tubular materials.
All kinds of AC & DC motors, power distribution panels,Transformers..etc.
May 2005 to April 2007 (2 years) : Manali Petrochemical limited, Chennai, India.
Designation : Executive Engineer
Department : Mechanical Department (Maintenance)
About Manali petrochemical limted (SPIC Group)
SPIC group is a leader in the downstream of refinery, petrochemical products, petro products &
fertilizers in India.
Duties & Responsibilities
Maintain the asset integrity of Petrochemical plants which constitutes P.O (Propylene oxide),P.G (Propylene
Glycol) & Polyol plants and Utility, Waste water treatment and pilot plants.
Review of P & ID, PFD & GAD drawings to understand the process and to provide technical services support to
operations.
Involved in the Annual shutdown maintenance of Propylene oxide plant.
Maintenance and Functional knowledge of Rotary Equipment’s & Stationery equipment’s.
Coordination of erection activities and piping erection and design at site.
Drawing study and execution of work to the sub-contractors.
Supervision for Pre fabrication and planning of piping spools.
Inventory control of consumable required for erection.
Co-ordination and supervision of the NDT methods, MPI,UT,RT & X-ray for the Inspection of welding joints.
7. Onsite Assignments under taken
Eni saipem Milano, Italy. (From 23 may 2007 to 06th August 2007) (75 days)
DevelopedSelf learningmaterialsforthe utilizationof ERPsystemSAP&AMOS in the areas of Plant
maintenance & warehouse in Amos and SAP MM module & PMmodule.
Complete functionality testing of the ERP tool AMOS for plant maintenance & Warehouse.
Offshore Dry-dock Projects Handled & responsibilities
Involved in Shipyard Dry-dock maintenance of an offshore jack up rigs Perro Negro 5 & Perro
Negro 7
Monitoring the Progress of Shipyard jobs (fabrication and refurbishment)
Organizingthe rigequipment’s Mobilization to OEMpremises for overhaul and witnessing the
test results and acceptance.
Coordinationtoinstall backthe Serviced equipment's and ensuring the equipment integrity to
keep it ready for rig acceptance.
Safety training courses:
Undergone HYDROGEN SULPHIDE (H2S) & SELF CONTAINEDBREATHINGAPPARATUS(SCBA) training
Course from SAUDI ARABIAN SAIPEMLtd.
Possess valid HUET (Helicopter Underwater Escape training) id to visit offshore rigs
Possess SAUDI ARAMCO ID to visit all the Onshore & Offshore SAIPEMRIG’s in Saudi Arabia.
Personal Profile :
DOB : 21-07-1983
Nationality : Indian
Marital Status : Married
Linguistic proficiency : English, Hindi, Urdu, Italian & Arabic
Driving license : LMV/MCWG (Saudi Arabia)
Passport no : L4546786, Expiry date : 22-01-2024
References
1) Kikilashvili Sergo
Saudi Arabian Saipem, Safety Manager
Email id : Sergo.Kikilashvili@saipem.com
Mob no : +966 506823471
2) Andrea Di Monte
Saipem, Middle east Assets Area Manager (onshore & offshore)
Email id : DiMonte.Andrea@saipem.com
Mob no : +966 550908237 & +971 562191369
3) Quarta Gianluca
Saudi Arabian Saipem, Quality Manager
Email id : Gianluca.Quarta@saipem.com
Mob no : +966 504597876
8. Declaration
I hereby declare that the information furnished above is true to the best of my knowledge.
Place: Saudi Arabia Shaik Shafi
Date: 01-Nov-16