1. SCOTT C STEWART
603 Bunker Hill Road
Clarksville, TN 37042
Home (931) 237-3925 Cell (931) 237-3926
yamahak@hotmail.com
OBJECTIVE: Seeking an overseas position as an A&P Aircraft Mechanic
SUMMARY OF QUALIFICATIONS
• A mature, hard working, dedicated and loyal maintenance professional
• Over 19 years maintenance experience with Helicopters
• Over 8 years maintenance experience with UH-60/ S-70 Helicopters
• Over 8 years maintenance experience with OH-58/ Bell 206/407 Helicopters
• Over 6 years maintenance experience with AH-64 Helicopters
• Over 4 years maintenance experience with CH-47 Helicopters
• Over 4 years maintenance experience with UH-1/ Bell 205/212/412 Helicopters
• Over 2 years maintenance experience with S-76 A-C++, S-92
• Over 1 year maintenance experience with EC-135 Eurocopter
• Over 1 year maintenance experience with S-61 Helicopters
• 3 years experience working in a Depot level Backshop repair facility
• FAA Airframe and Powerplant Certificate #3439885
• 2 years experience as a Technical Inspector and Weight and Balance Technician
• Expert in the use and maintenance of aircraft technical publications, both paper and electronic
• Expert in the use of required maintenance forms and records
• Highly proficient with Unit Level Logistics System-Aviation (ULLS-A and ULLS-A(E))
computerized maintenance records
• Possesses a U.S. Passport
• Highly proficient with Windows and Microsoft software and PC operation
• Excellent organizational and record keeping skills
• Excellent written and verbal communication skills
• Able to work with diverse groups of people with outstanding results
• Numerous awards and commendations for performance
• Willing to travel
PROFESSIONAL EXPERIENCE
May 2014 to Present – PHI Inc. Field Base/ Flight line Senior Mechanic Houma, LA
• Performed all daily, scheduled and unscheduled maintenance for Field Base Houmas Fleet of
30+ Helicopters. That included the following airframes: Bell 206, 407, Eurocopter EC-135,
Sikorsky S-76 and S92.
March 2012 to April 2014 – DynCorp, Helicopter Mechanic Basrah/Baghdad, Iraq

2. • Performed all daily, scheduled and unscheduled maintenance on S-61, UH-1N and UH-1 ST
Helicopters.
Sept 2011 to Feb 2012 - SES-I, General Mechanic Fort Campbell, KY
• Supporting new UH-60 “Mike” Model helicopters for delivery to units
• Performing all phases of aircraft maintenance, troubleshooting, repair and component repair
November 2010 to May 2011 – Qinetiq, Host Nation Technical Instructor Kirkuk, Iraq
• Teaching Iraqi nationals of the Iraqi Flight School how to maintain Bell 206, OH-58 Helicopters
and the Rolls-Royce 250
• Training included but not limited to: using aircraft forms and manuals, performing
AVUM/AVIM level maintenance and proper shop practices
May 2010 to October 2010 – DynCorp, Technical Inspector Mannheim, Germany
• BackShops RESET Quality Control for AH-64, CH-47 and UH-60 Aircraft.
• Inspected work to assure quality and compliance with technical instructions was followed.
• Maintained technical pubs, ULLS-A, MCDS, logbooks, forms and records all relative to aircraft
maintenance.
• Knowledgeable in all aspects of RESET and Phase maintenance.
• Initiate and follow up on Monthly Quality deficiency reports.
May 2009 to April 2010 - SES-I, Technical Inspector Huntsville, AL
• TI/ QC for MODS and maintenance on, S-70, UH-60 (A,L,M & HH) & B206, OH-58 A-D
airframes
• Inspected all work to assure quality and compliance with technical instructions
• Maintained technical pubs, ULLS-A, MCDS, logbooks, forms and records all relative to aircraft
maintenance.
Administered and maintained aircraft weight and balance programs
• Initiate and follow up on Monthly Quality deficiency reports.
• Knowledgeable in ANSI/ISO/ASQ Q9001-2000 quality management systems and requirements.
September 2007 to January 2009, L-3 Communications, Aircraft Mechanic Iraq
• Maintained UH-60 A/L/ M Aircraft for the US in support of Iraqi Freedom
• Performed PMI, 3-11, 10hr, 40hr, 120hr inspections, Phase, scheduled and unscheduled
maintenance on helicopters for the United States Army.
• Repaired, adjust and tested aircraft components according to technical manuals
• Worked on a flight line team doing launch, recovery, preflight, track & balance, final aircraft
testing and troubleshooting
• Repaired, replaced and perform operational and preventive checks and alignments on aircraft
flight controls

3. • Adjusted, repaired, or replaced defective components based on analysis of test results. Used
blueprints, schematics, handbooks, and other technical documents to ensure maintenance was
performed to standard.
May 2007 to August 2007, US Helicopter, Aircraft Technician Ozark, AL
• Performed phase maintenance, inspections according to the Reset Guide on OH-58A, C & D
helicopters for the United States Army.
• Provided support for the assembly of UH-1s for the Iraqi Air Force.
• Repaired, adjusted and tested aircraft components according to technical manuals
• Worked on the flight line team for launch, recovery, preflight, track & balance, final aircraft
testing and troubleshooting.
• Repaired, replaced and perform operational and preventive checks and alignments on aircraft
flight controls.
January 2004 to May 2007, DynCorp, Aircraft Mechanic Ft. Campbell, KY
• Worked in Back Shops, on the RESET and National Maintenance Program.
• I performed Depot level repairs and overhauls on various aircraft components.
• Repaired/ Overhauled Main rotor heads for the following airframes, AH-64, UH-60, CH-47 and
OH-58.
• Repair and serviced main rotor blades.
• Performed RESET maintenance on UH-60 airframes.
March 1993 to December 2003 I worked outside the aviation field as a Network Technician at various
locations.
August 1992 to February 1993, DynCorp, Aircraft Mechanic Ft. Campbell, KY/ Katterbach,
Germany
• Performed phase/ overhaul maintenance according to the STIR Guide on AH-64 and UH-60
helicopters for the United States Army
• Repaired, adjusted and tested aircraft components according to technical manuals
• Repaired, replaced and perform operational and preventive checks and alignments on aircraft
flight controls
• I completed rigging, aircraft weighing and general servicing of aircraft in for STIR.
March 1990 to July 1992, U.S. ARMY, Powertrain Mechanic Wurzburg, Germany
• Trained as a 68D/ 15D Power Train Mechanic
• Trained as a 68D X1 for the then new AH-64
• I graduated as Distinguished Honor Graduate from the General Power Train course
• I graduated as Honor Graduate from AH-64 Power Train course
• Assigned to Apache training program, deployed to Iraq as support for an attack battalion
• Completed Primary Leadership Development Course
December 1985 to February 1990 – U.S. ARMY, Infantry Ft. Campbell, KY

4. • Trained as a 11B Infantry.
• Attended US Army Air Assault School
Education
A&P License #3439885, Certified 03/27/2009
 I have been to school for the following airframes: S-61, S-76, S-92, Bell -407, UH-60
 Aircraft Power Train Course,
U.S. Army, Ft. Eustis, VA 1990;
• AH-64 Power Train Course,
U.S. Army, Ft. Eustis, VA 5/90;
• Primary Leadership Development Course,
U. S. Army NCO Academy, Ft. Hood, TX 11/90;
 Gar-Field High School, Dale City, VA 1985
 US Army 12/85 – 7-92
 Honorable Discharge Date 7/20/92
References gladly furnished upon request.