2. CLASSROOM RULES
• Ask questions.
• Respect and
listen to your
classmates.
• Respect and
listen to the
teacher.
• Raise your
hand to speak.
• Be prepared for
class.
• Be quiet when
the teacher is
talking.
• Be quiet when
classmates are
talking.
• Follow health
protocols.
• Share new
ideas.
7/1/20XX Pitch deck title 2
5. 7/1/20XX Pitch deck title 5
A theory is a carefully thought-out explanation
for observations of the natural world that has
been constructed using the scientific method,
and which brings together many facts and
hypotheses. A principle, on the other hand, is a
basic truth, rule or law.
8. OBJECTIVES:
1. Determine
the different
planes of
projection.
2. Create
orthographic
views through
a given figure.
3. Value the
importance of
knowing the
theories and
principles of
orthographic
projection.
7/1/20XX Pitch deck title 8
9. THEORIES AND PRINCIPLES OF
ORTHOGRAPHIC PROJECTION
Multi-view
drawing – a
drawing that
shows more
than one
view of an
object.
Orthograph
ic
Projection –
A system for
graphical
representatio
n of an object
by a line
drawing on a
flat surface.
Orthographic
View – a
drawing that
shows a side of
an object viewed
directly from 90
degrees.
7/1/20XX Pitch deck title 9
10. WHAT ARE THE PRINCIPAL VIEWS OF
ORTHOGRAPHIC DRAWING?
16. 7/1/20XX Pitch deck title 16
•Three planes of projection are
used in orthographic drawing.
These are called the horizontal
plane, frontal plane, and the
profile plane.
28. 7/1/20XX Pitch deck title 28
1. Although there are six principal views that
can be drawn in an object, how many
regular views are normally required in
the preparation of a working plan.
A. 6 B. 3 C. 4 D. 5
29. 7/1/20XX Pitch deck title 29
2. A system for graphical representation of an
object by a line drawing on a flat surface.
A. Principal Views
B. Orthographic View
C. Orthographic Projection
D. Multi-View Drawing
30. 7/1/20XX Pitch deck title 30
3. What do you call the 3 views of
drafting?
A. Front, Right Side, Top
C. Top, Rear, Left Side
B. Front, Left Side, Top
D. Front, Side, Rear
31. 7/1/20XX Pitch deck title 31
Fill in the Blanks
4. The perpendicular distance
between horizontal planes is
referred to as ______________.
32. 7/1/20XX Pitch deck title 32
Fill in the Blanks
5. The perpendicular distance
between profile planes is
called ______________.
33. GROWTH STRATEGY
ADDITIONAL
ACTIVITIES
• RULER
• PENCIL
• ERASER
• TAPE
• LONG BOND
PAPER -
WHAT HAVE
YOU LEARN?
DID IT
SOMEHOW
HELP YOU IN
YOUR DAY-TO-
DAY LIVING?
7/1/20XX Pitch deck title 33