AAVOS International bvba has a wide range of online process instrumentation for many applications in chemical, petrochemical, oil, gas, food, beverage and pharmaceutical industry.
We will advise you to find the right equipment for your analysis of fluids, gasses and solids.
Process on-line analysers are offered as a solution to the efficiency of plant operation and offer huge paybacks. Our analysers are also applied for monitoring emissions and as safety measurement. http://aavos.be
1. WWW.AAVOS.BE
Your partner in process analysis GAS - LiQUID - SOLIDS
Process analysis | CEMS | CAMS | Environmental | Chemometric Modeling Software
Sample Conditioning Systems | Shelters | Advice | Sales | Integration | Commissioning | Service
your partner in process analysis
2. Industries:
3AAVOS INT.2 AAVOS INT.
• UV Spectroscopy
• Photoacoustic Spectroscopy
• (Near) Infrared - FT (N)IR Spectroscopy
• VIS/NIR Photometers
• Mass Spectroscopy
• Raman Photometry and Spectroscopy
• Gas Chromatography
• Tunable laser diode
• Density measurements
• Paper tape analyses
• H2 Detection
• Physical Properties
• Ultrasonic Concentration
• Refractive index
• ...
Copyright (c) 2017. All Rights Reserved.
AAVOS International
www.aavos.be | info@aavos.be
Tel: +32 (0) 51 69 78 15
Fax: +32 (0) 51 69 78 17
Aavos International
Sparkevaardekenstraat 3
B-8600 Diksmuide
Aavos International has 25 years of
experience in the world of process
instrumentation.
We offer a complete package of service and
support:
• analysis and advice, we look for the
most efficient and economical solution
• consulting and engineering
• adaption of analysers
• integration (scs, shelters,...)
• commissioning of the equipment
• instructions and data, training and tech-
nical support
• spare parts, repairs and preventive
maintenance
• calibration and validation
We sell and supply according the agreed
contract.
We distribute state of the art systems in
the Benelux, Scandinavian countries and
for some brands we distribute all over
Europe and beyond.
Our trained and experienced technical
staff commissions and services all over
Europe.
We have many references in mid-size bu-
sinesses and multinationals.
Petroleum
Petrochemical
Chemical
Pharmaceutical
Food & Beverage
Polymer
Power Plants
Water treatment
Environmental
Semi-conductor
Steel Plants
Fermentation
Sterilization
Bio energy
...
Our products:
your partner in process analysis
3. 4 CINGO INC. 5CINGO INC.
Analect Lab
RefinIR HT
+ accessories
On-line and at-line FT-NIR and FT-IR process
analyzers provide real time multi component
measurements for physical and chemical
properties of liquids, solids and gases. Based
on the rugged Transept interferometer, these
systems have years of proven capability in
harsh process environments.
High pressure and high temperature applica-
tions. Optical multiplexing capabilities: up to
16 streams. Extractive stream switching: >50
channels. Spectral range: Mid-IR 7400 to 450
cm-1, Near-IR 12000 to 2500 cm-1 with fibre
optics, 12000 to 1200 cm-1without fiber op-
tics. Max. res.: 1.5cm-1.
Applications: Reaction monitoring, polymers,
stack gas analysis, environmental protection,
composition, RON, MON, Cetane, Cetaneboost-
er, Benzene, Aromatics, Crude oil, Catfeed,
Lube oil, Additives,...
The new ANALECT ®RefinIR™ is a fully
integrated laboratory autosampler and FTIR
instrument. It is designed to measure liquid
hydrocarbons including gasoline, diesel and
crude oils in a single autosampler. Determina-
tion of physical properties and chemical com-
position with the touch of a button.
Uses the same interferometer as the process
instrument. Ideal for developing on-line appli-
cations and calibrations. Seamless calibration
transfer with Analect FT(N)IR process analyz-
er.
Multiple accessories available: gas cells, Hot-
shot for edible oils and polyols, windows (kBr,
CaF, BaF, ZnS,ZnSe,...), probes, multiplexer, op-
tical fibers,...
Applications: Grignard formation, fermenta-
tion, raw materials QC, polymers, composi-
tion,...
Process Mass
Spectrometer
FTIR Analyzer
continuous air
monitoring
Multiple gases in multiple streams analyser.
Magnetic sector based technology.
MGA1200: Installed in Space Lab and nuclear
submarines. Fast mass spec: response in less
than 1sec for all components. Mass range:
1-130 AMU, 300ppm - 100% I-scan: up to 50
components. Result in 10-40sec. Mass-range:
1-200AMU (300AMU optional). Low PPB-100%
Applications: EtOx, steel plants, fermentation,
leak detection, naphtha cracker, air separation
plants, environmental protection, ammonia
plants, fuel cells,...
The EVM monitor provides round-the-clock
multi-point continuous air monitoring for a
variety of applications. • Proven, reliable FTIR
technology yields real-time analysis of both or-
ganic and inorganic compounds. • Measures
ambient toxic and pollutant gases with ppb to
% level detection.
A variety of user-configurable alarms for in-
stant warnings of toxic gas levels and system
control. • Capable of monitoring 28 compo-
nents with up to 32 sampling points over a dis-
tance of 300 meters from the monitor. • Rapid
response time – typically 20-200 seconds per
stream.
Hyperflux
Lab and
Online Raman
spectroscopy
Analysers
This spectroscopy instrument delivers rapid real-time discrimination across a wide range of chemical
analysis and process control applications.
The patented solution eliminate the trade-off between resolution and throughput to deliver maximum
light to your focal plane. Stokes and anti-Stokes coverage for typical laser excitation wavelengths (532,
633, 785 and others) with spectral resolution up to 4 cm-1.
No fixed configuration, we build to your requirements across UV/VIS/NIR. Detect weak signals quickly:
fluorescene-free ani-Stokes, low-power illumination.
The hyperflux Pro plus spectrometer configured for process measurements is the highest performing
Raman process device on the market (10* better performances). This analyser uses a proprietary pat-
ented invention called a high-throughput virtual slit (HTVS). A virtual slit is able to achieve the same
high-resolution benefits of an actual slit aperture but maintains nearly 100% light throughput,
eliminating the classic trade-off between throughput and resolution. HTVS technology allows the best
Raman analysis currently achieveable anywhere.
Applications: Pharma, petrochemicals, chemical, polymer, food, semiconductor, others,...
Examples: monitoring of polymer curing processes, following crystallization processes, monitoring ex-
trusion processes, optimization of chemical reactions in manufacturing, real-time detection of process
anomalies and excursions, analysis of fuel mixtures, pigments, paints, measurements of H2S,...
3D chemical
imaging of
solid dosage
formulations
The industry’s only solution for full 3D chemical imaging of solid dosage formulations
The H2Optx mPAT LAB integrates Raman spectroscopy, UV & VIS light spectroscopy, microscopy,
hi-res optical imaging with automated X-Y-Z surface scanning. This seamless integration, combined
with H2Optx robotics & native sampling accessories, enables novel capabilities for the 3D charac-
terization of powders, tablets, cells, vials, liquids, and emulsions.
The H2Optx Pillerator interfaces with the mPAT LAB to provide automated sectioning (5–500µm
layer thickness) of solid dosage formulations. Hyperspectral scans of each layer are used to con-
struct a 3D chemical map and structural analysis of a tablet or solid analyte.
The H2Optx Platerator interfaces with the mPAT LAB to enable fast, multi-axis Raman, UV and hi-res
optical scans of complex powders, solids, and emulsions.
Applications: Ideal for pharmaceutical and chemical industry.
Analect
Process
FT(N)IR
MASS
SPECTROMETER
FTIR
AIR
FTIR RAMAN
RAMAN UV-VIS
MICROSCOPY
NEW
NEW
FT(N)IR
NEW
4. 6 CINGO INC. 7CINGO INC.
Concentration
Measurement
with Ultrasonic
Probe
Liquid and Gas
Density & flow
Meter
Determination of the concentration in reflec-
tion of transmission using ultrasonic sound.
Different types of connection available in Eex-
d-IIC-T6, sanitary version,...
Used in combination with conductivity meas-
urement for concentration, curves with chang-
ing slope direction. Also used for TDS/TSS,
Alcohol, Plato, Brix. Measuring in clear/turbid
liquids and slurries.
Applications: Building Materials, Chemicals,
Dredging, Food and Beverages, Mining and
Mineral Processing, Oil and Gas, Pulp and Pa-
per, Semiconductor and Flat Panel, Wastewa-
ter Management.
The world’s first MicroCoriolis liquid/gas den-
sity meter. Density is determined by measuring
the frequency shift of a small silicon resonat-
ing structure. The high frequency resonance
inherent in such a lightweight structure makes
it immune to normal vibrations typically found
in a plant.
Highest accuracy available on the market:
down to 0.000001 gram/cc for gas, high pre-
cision, small size, ultra-fast response time
(<1sec), ATEX systems integration, lower
costs,...
Applications: automotive, consumer, medical,
pharmaceuticals, chemicals, energy, water
treatment, high technology and biotech,...
FTLS UV Gas
and Liquid
Analyser
This uniquely rugged and simple design utilizes a high resolution spectroscopy analyser which uses
ultraviolet energy in different ranges for the determination of the concentrations and the character-
ization of the gases and liquids. The measuring principle FTLS (Fourier Transform Least Squares)
is based on light absorption according to Beer-Lambert’s law.
High resolution spectrograph | Xenon lamp | UV spectroscopy by FTLS 180nm (160nm) -380nm
Features: Ranges vary from ppb to 100% | +/-1% accuracy, +/-1% repeatability | Modbus serial com-
munications | Dual isolated 4-20mA outputs | Fast response 2 seconds | Low detection limits | No
chemicals required | No consumables required | Multiple gasses measurable
Applications: Natural gas, LNG/LPG, Upstream, Downstream, Chemical production, Biogas, Reform-
er gas, Recycle gas, Fuel gas monitoring, Pipeline protection, Food/Beverage applications, Steel
applications, Pharmaceutical applications, Safety applications,... The AETHER gas analyser can
measure H2S, COS, CO, CO2, CH4, SO2, CS2, Mercaptans, H2S, NH3, NO, NO2, BTEX, CI2, NCI3, for-
maldehyde and phenol in process streams. The NAIADE liquids analyser can measure H2S, NH4+,
HC, VOC, TOC, O2, CI2, PH, and much more in process streams.
Gas Analysis
by
Photoacoustic
Spectroscopy
The QCNose and QCBox Photoacoustic analyzers are designed to detect and monitor all key gases
relevant to your research or industrial process. Based on our patented revolutionary photoacoustic
spectroscopy technology, our instruments are designed to combine performances and ease-of-use:
Latest digital electronics to improve the signal quality
Full range linear calibration (ppb – % range)
Optimized photoacoustic cell according to the applications
User-friendly software
No mechanical moving parts
No high precision optics and mirrors
Not sensitive to vibrations
Not sensitive to temperature changes
On-site calibration without need for returns to manufacturer
Maintenance-free equipment
Based on the Helmholtz resonant cell principle, the Photoacoustic cell expands and pushes the bound-
aries of low concentration detection. Based on a simple and robust principle, this technology is appli-
cable to all fields of trace gas detection.
MicroView
portable and
online
hygrometer
The MicroView On-Line or portable Hygrometer can sample inert and non-reactive gases. It is ideal
for applications where fast speed of response and reliable data collection are important and the
ability to provide audit records is of benefit.
Temperature Controlled Silicon Sensor transfers laboratory accuracy in to the field, offering a Trans-
fer Standard instrument with unrivalled speed of response. Automatic Push-Purge Sensor drydown
for rapid response and elimination of hysteresis. Graphical display for detailed sample information
and audit capability. Internal datalog feature stores measurements in the instrument memory for
review at a later time. Atex certified model available.
Applications: Natural Gas and LNG- Refinery recycle gas, HDP production, injection moulding, Sem-
iconductor industry- Nuclear reactors, Vacuum evacuation & gad refill on oil filled transformers,
Permeability testing, Food packaging,...
ELECTRO
CHEMICAL
ULTRA
SONIC
MEMS
CORIOLIS
PHOTO
ACOUSTIC
UV
FTLS
NEW
NEW
5. 9AAVOS INT.8 AAVOS INT.
Clearview db
VIS/NIR
Photometer
The db photometer is the first commercially available through dual-beam filter photometer. A primary
attraction of any photometric analyser is it’s low cost. The compromise is usually performance. By
adding the dual-beam feature, the performance drop in comparison to scanning spectrometers is
lessened. Though inexpensive, this photometer has a flexible configuration that meets many online
analysis requirements for liquid and gas process streams.
Benefits: Stable dual-beam design decreases drift due to lampaging -yielding long-term performance.
Several enclosure options means lowest installation costs. Six filter positions make
multi-parameter analysis a possibility. Optional second sample channel for lower cost per sample
point. Compatible with a wide range of flow cells and insertion probes. Low maintenance. 5000 hour
lamp (~7 months). Dual-beam performance lengthens time between required probe cleanings.
Applications: Color - ASTM or saybolt in fuels. OH number for polymer reaction end point. Water con-
tent in solvents. Haze in diesel fuel. NaOH in water. Monitoring sterilization with H2O2
Tunable Laser
Online H2S/
H2O Analyser
Process Paper
Tape Gas
Analyser
The laser moisture in natural gas analyser
or hydrogen sulphide in natural gas analyser
uses the stability for accurate low level moni-
toring. The use of a sophisticated laser based
measurement allows long intervals between
calibration, excellent noise performance and
intrinsic linearity, coupled to long operation
life and low maintenance requirements.
Applications: Natural gas monitoring, Refinery
products, Petrochemical processes, Gas pro-
cessing plants.
Future aplications: CO2 / O2 TDL Gas Analyser
(2018)
High sensitivity, exceptionally low-level imput-
ity detection ranges (ppb).
Gas analyser using Chemocasette detection.
Interference free reading.
Fast response.
Can be used for liquids with optional combus-
tion unit.
Applications: Total sulphur, Total NOX or or-
ganic chlorides in gas and hydrocarbons,
Arsine, HCI, Ammonia, Phosgene, HCN, Phos-
phine, H2S,...
Also available for lab-applications
FGA 1000 Flare
Gas Analyser
for Total Sulfur
We offer the most versatile Total Sulphur analysers available. The Atom FGA-1000 has the highest
dynamic measurement range of any commercially available analyser without the need for additional
sample valves, calibration gases or system hardware. In addition, the Atom FGA-1000 does not require
installation in a shelter.
The Atom FGA-1000 is an online process analyser utilizing patented Excimer UV Fluorescence (EUVF)
technology to measure Total Sulfur in a variety of applications such as monitoring refinery flare gas and
subsequent sulphur dioxide (SO2) emissions as mandated by the EPA Rule 40 CFR 60,
Subpart Ja.
Single Calibration Range/Lowest cost of operation
Speed of analysis and response time (60-100sec)
Most compact Footprint
Rugged versatile design - No shelter required
Applications: Process Streams, Flare Gas, Stack Gas, Refined Fuels, LPG, Natural,...
Gas Detection
The SXI and SX IR / EX series gas detector / transmitter is a robust detector in an industrial and /
or ATEX housing for detection of different gases.
The housing is made of aluminum, splash proof, HF-shielded (and explosion proof).
These gas detector transmitters have a 24 VDC 3-wire, 4 ... 20mA output signal, allowing them to
be easily connected to standard types of control units such as the M500 Series, M600 Series and
M2000 Series Gas Monitors
We have a complete and clear range of gas detection equipment.
gas detection at production companies, laboratories, gas detection at tanker, gas detection in the
(petro) chemistry ,gas detection at biogas plants, gas detection at power plants, gas detection at
windmills, gas detection in wastewater treatment,...
Applications: O2, CO, CL2, H2S, H2, HCL, NO, NO2, SO2, HF, F2, NH3, CxHx,...
VIS NIR
PHOTOMETER
TDL PAPER
TAPE
IR -
ELEKTROCHEMICAL
UV
FLUORESCENCE
NEW
6. 10 CINGO INC. 11CINGO INC.
The Viscometer: we have a range of on-line viscosity analysers for various applications. They corre-
late with the corresponding ASTM laboratory standard measurements. As well as measuring New-
tonian fluids we also have special capillaries that enable us to handle non-Newtonian samples.
Models are also available to handle high pour point streams.
Option: Viscosity index (dual bath) - continuous viscosity measurements at dual temperatures (typ-
ically 40°c & 100°c)
Colour and Opacity Monitor: The Hallikainen colour analyser can measure in accordance with ASTM,
Saybolt and other scales. An opacity version is also available.
Cloud Point Analyser: The cloud point refers to a fuel’s temperature as it begins to thicken and
“cloud” as the temperature drops due to some of the heavier “waxy” components beginning to
precipitate out.
The i-Cloud utilizes a measuring cell which minimizes the effects of any dissolved water in the
stream and also features a touch-screen intuitive colour display. As with all our on-line physical
property analysers, it correlates well with the corresponding ASTM laboratory standard measure-
ments.
Viscosity
Analyser
The VISCO-VP is a new generation of in-line viscosity meter. The VISCO-VP is a torque -oscillating vis-
cosity meter, which measures the drag of a fluid at the surface of the sensor. The sensor oscillates at
its resonance frequency, and the amplitude of the vibration is muted as the viscosity increases. The
viscosity can be calculated out of the energy required to keep the amplitude constant.
Depending on the process fluid and application, there are various models VISCO-VP for the required
measurement range and accuracy.
We also have the VISCO-FT: this is a flow-through model, in which the process fluid flows through a
straight tube with no bend restrictions The sensor can be produced in a variety of materials such as
polycoated for aggressive fluids. Advantages: proven in many applications and installations, no moving
parts (torque-oscillating), robust, no maintenance required, fast and accurate measurement, suitable
for low and very high viscosity.
Applications: Chemical, petrochemical, pharmaceutical, food industry. Other applications are possible
with fluids such as: acrylic fibres, textile fibres, black liquor, condensed milk, darcon, lycra, gelatine, PET,
resins poly-isobutyls and printing ink.
Process
Refractometer
The in or online refractometer is a process refractometer and measures concentrations based on
the refractive index of an infrared light beam going from a sapphire prism into the process liquid.
The unique optical principle of the refractometers is patented.
The refractometer has a sensitivity of up to one thousendth of a per cent and is highly stable.
An optional continuous ultrasonic cleaning systems prevents any coating of product on the surface
of the measuring prism not adding water, steam or any chemicals into the process liquid.
Advantages: the analyser can measure very low concentration variations at high precisions. The
measurement is not influenced by temperature variations or fixed particles in the process liquid,
by pressure variations, opacity or other interferences. An unique and patented ultrasonic cleaning
system prevents coating of the measuring prism.
Applications: Food and Beverage: measuring soft drinks and juices, beer, applesauce, syrups, al-
cohol-distillation processes, etc. Chemical and Petrochemical: Teflon plunge bath, PVA, ammonia,
cooling- and lubrication liquids, gelatines, urea, DMAC, etc.
Distillator
Vapour
Pressure
Flash point
H2S/TS
measurement
The vapour pressure analyser utilize the jet or-
ifice measuring principle which enables a con-
tinuous measurement and which correlates
well with the corresponding ASTM laboratory
standard measurements.
The Hone 4400 continuous flash point analys-
er is very well field proven and uses a univer-
sally accepted catalytic detector. Correlates to
ASTM D93 or D56 test methods.
Distillation: the new microprocessor con-
trolled D86 Boilar utilizes the latest designs
to incorporate ultrasonic level detection, au-
tomatic barometric compensation and a multi
stream capability which can further meet your
continuous boiling point needs.
The only solution for low ppm/ppb H2S
meassurements. The principle of operation is
as follows. A reel of paper tape impregnated
with lead acetate is exposed to the gaseous
process sample in the sample chamber. Hy-
drogen sulphide (H2S) in the process sam-
ple reacts with the lead acetate, after acidifi-
cation, to form lead sulphide (PbS), a brown
compound that stains the tape.
The higher the concentration of H2S the dark-
er the stain. A focused LED and single photo
detector system continuously measures the
darkening stain and the analyser reports this
as a 4-20mA output of the concentration of
H2S.
Applications: gas, liquids & oil
PAPER
TAPE
PHYSICAL
PROPERTIES
Physical
Property
Analysers
VISCOMETER
IRFT
REFRACTOMETER PHYSICAL
PROPERTIES
NEW
NEW
7. 13AAVOS INT.12 AAVOS INT.
Monitoring
water and
process water
On line analyser for the automatic monitoring of water quality and process water.
• High reliability achieved with a new measuring vessel and its associated fiber optics system
• Low cost of ownership : reduced reagents’ consumption, simple and efficient maintenance
• New peristaltic pump : increased accuracy and quick tubing renewal
• Ergonomic design
• Analyser easily configurable
• HI-LO thresholds and sample failure alarms per stream
• Smart and easy to use Windows CE interface
• JBUS RS232 communication protocole (RS485 on option) : measures, end of cycle stop, stream
selection (others on request)
• Journal of events and integrated data logger
• Data retrieval via USB key : text files with Excel spreadsheet compatibility
Applications: Aluminium, ammonium, free chlorine, total chlorine, chlorides, chromium VI, hydrazine,
iron, manganese, morpoline, peracetic acid, phenols, phosphates, silica, sulfates, hardness, TH, etc…
Chemometrix
Modelling
Software
Pirouette, our most comprehensive chemometrics package, is designed specially for Windows
2000/XP/Vista/7/8/10. Modelling and prediction tools for data exploration, pattern recognition,
property correlation and mixture analysis methods are implemented in a single program.
Applications: Chemometrics modelling: PLS, PCR, PCA,...
• To explore patterns of association in data
• To track properties of materials on a continuous basis
• To track and use multivariate classification models
Solid Sate
Spectrometer
Irmadillo
The IRmadillo™ FTIR spectrometer is a solid-state instrument certified for use in hazardous and
explosive environments. Mounted directly on, or in-line with, manufacturing vessels, the instrument
excels at continuous monitoring of industrial liquids and slurries.
Faster Results as They Happen
No need to wait for your results. With an in situ sensor to monitor your reactions live, the IRmadillo™
tells you what your reactions are doing as they happen, rather than after they happen — and where
ever they happen! No more need to wait for your analysis results to return from remote sampling
techniques such as with HPLC or GC.
Key Qualities & Rugged Components
• Mid-infrared spectrum analysis
• Inert Hastelloy probe
• ATR probe (Diamond available) pH 0-9
• Certified safe for use in hazardous and potentially explosive environments
• Compact and rugged. Body dimensions: 200 x 281 x 310 mm (approx. 8 x 11 x 12 in). Weight
16.5 kg (36.4 lb)
Innovation in Process Monitoring & Control
Standard FTIR analytical instruments are highly sensitive to vibration and ambient temperature—
making them a challenge to use outside or on the manufacturing floor. Keit offers an innovative
solution for continuous monitoring of your processes in real-time over a variety of industrial applica-
tions – from detecting the quantity of water in glycol at a petro-chemical plant to measuring sugars
and alcohol in a fermentation vat.
FTIR for Manufacturing Applications
It opens up new horizons for when and where spectroscopy can be applied.
Fourier Transfer Infrared (FTIR) spectroscopy is a well-established analytical technique in the la-
boratory, but conventional instruments are bulky and fragile: susceptible to vibration, temperature
changes, and requiring flexible, lossy interconnects to the reaction vessel making the use of them
in the manufacturing floor impractical.
Unlike standard systems, Keit uses a novel optical design with no moving parts. It is impervious
to vibration, weather, and rough operating environments. The dependable IRmadillo™ FTIR spectro-
meter performs with no remote sampling or long fibre-optic cables making it ideal for manufactur-
ing environments for process monitoring and control.
The IRmadillo™ FTIR spectrometer tells production and chemical engineers about their processes
at the time of reaction by being mounted directly onto their production equipment rather than
conventional analysis techniques that requires continual sampling and analysis in a remote stable
environment.
The application of FTIR spectroscopy can be successfully used across a variety of manufacturing
industries.
SOLID FTIR
SENSOR
COLOMETRY
TITRIMETRY
CHEMOMETRIX
NEW
NEW
8. European Tech Serv NV
Sparkevaardekenstraat 3
8600 Diksmuide
Belgium
Tel. +32 (0)51 81 00 10
Fax +32 (0)51 69 78 17
info@etserv.be
sales@etserv.be
www.etserv.be
COOL RENT SERVICES
Sparkevaardekenstraat 3
8600 DIKSMUIDE
Belgium
Tel: +32 (0)51 50 21 04
Fax : +32 (0)51 50 39 35
info@coolrentservices.be
www.coolrentservices.be
CEM/EXM400
CEM/EXM500
These analysers are extractive online gas analysers dedicated to continuous emission monitoring
(CEM). It covers applications like DeNOx systems on power plants, generators, chemical plants,
petro-chemical plants, or biogas reactors.
They are based on UV spectroscopy that brings a higher sensitivity and stability than infra-red
systems and also gives the possibility to measure several gases simultaneously, example: NH3,
SO2, NO.
A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all
the gases having a periodic structure like NH3, SO2, CS2 and others.
All the internal gas circuit is heated at 190°C to admit directly hot and humid combustion gas.
No risk of interference with H2O, CO, CO2 or CH4 as all theses gases have no absorbance
on the UV range.
Applications: Liquified petroleum gas, Gasoline, Napthgas/Kerosene’s, Crude oil, Fuel oil,...
NH3, SO2, NO, NO2, H2S, CS2, NCL3, benzene, toluene, xylene, acetylene
UV300
UV400
UV500
EL300
ONLINE WATER ANALYSERS
The WATER ANALYSERS, based on a modular concept, allows to monitor simultaneously many
different parameters (up to 16) for waste water or drinking water treatment plants as well as river
monitoring stations. Each parameter corresponds to a specific optical module that can be selected
by the user while ordering the analyser, depending on the application.
Mainly based on UV spectroscopy, well known for its stability and low operating cost, the
analysers can measure parameters like COD, organic matter, ammonia, aromatics hydrocarbons
(PAH),
nitrate, colour, hydrogen sulphide and chlorophyll A. Complementary modules allows the measure-
ment of phosphate by colorimetric method and turbidity by a laser diode.
External probes can be added for physicochemical parameters like pH, ORP, dissolved oxygen and
conductivity.
Thanks to its automatic cleaning system and its extremely long life time lamp, the maintenance is
roughly limited to the periodic refill of the inexpensive cleaning solution.
A new web-based interface allows the control and the troubleshooting from internet on laptop,
tablet or i-phone.
AIR QUALITY MONITORING
We are a specialist / distributor in En-
vironmental equipment like particulate
monitors for ambient and stack applica-
tions, particulate samplers for both indu-
strial and occupational hygiene market,
passive sampler for ambient studies.
COOL RENT SERVICES
We are specialized in refrigeration
technology rentals. We offer you the
solution for your cooling problem.
CRS
ONLINE GAS ANALYSERS
NEW
NEW