1. Experience:
May, 2002--Till August, 2016;
Company: National Drilling Company (Abu Dhabi).
Capacity: Jacking System Specialist, Engineer (Assets Control).
Project: Refurbishment Of Jacking System.
Job Description:
 Rebuilt 36 Nos. Jacking System Gear Trains Instead Of 36 Nos. During
Operation And Major Maintenance For 2 Rigs (Al-Ittihad & Al-
Ghallan), (Marathon Le-Tourneau Manufacture).
 Assited During Jacking SystemUp-Grade By OEM ForRigs Al-Ittihad,
(MIS Shipyard-Sharjah) & Rig Al-Ghallan (Lamprell Shipyard-
Sharjah), (Marathon Le-Tourneau Manufacture).
 Rebuilt 36 Nos. Jacking System Gear Trains Instead Of 36 Nos. During
Operation And Major Maintenance For 4 Rigs (Junana, Diyina, Al-
Yasat & Yemillah), (Hitachi Manufacture).
 Replaced Upper And Lower Shock Pads During Operation And Major
Maintenance For 4 Rigs (Junana, Diyina, Al-Yasat & Yemillah),
(Hitachi Manufacture).
 Assisted During Jacking System Up-Grade By (OEM) For Rig Junana
(Hitachi Manufacture), (Lamprell Shipyard-Sharjah) & Rig Al-Yasat
(Hitachi Manufacture), (Gulf Pipe Company-Abu Dhabi).
 Rebuilt 18 Nos. Jacking System Gear Trains Instead Of 18 Nos. During
Operation And Major Maintenance For 4 Rigs (Brakah, Beynouna,
Delma & Al-Bzoom), (Baker Marine Manufacture).
 Assisted During Jacking System Up-Grade By (OEM) For Rig Al-
Bzoom (Baker Marine Manufacture), (MIS Shipyard-Sharjah).
 Assisted During Jacking System Up-GradeConversion FromHyrdaulic
To Electric Type By (OEM) For Rigs Al-Bzoom (MIS Shipyard-
Sharjah), Delma (ADYARD Shipyard-Abu Dhabi), Brakah (Esnaad
Shipyard-Abu Dhabi), Beynouna (Lamprell Shipyard-Sharjah), (Baker
Marine Manufacture).
 Rebuilt 27 Nos. Gear Trains And Replaced Same Quanties Of
Hydraulic Motors, Brake Bands, Brake Drums Instead Of 27 Nos. For

2. Barge Al-Ghweifat During Operation And Major Maintenance
(SEAREX Manufacture).
 Assisted During Jacking Trials ForAll Offshore Rigs Belong To NDC
As A Jacking System Specialist.
 ResponsibleTo Order AllJacking System Parts And Review Up-Grade,
Also Carring Out All Annual Internal Jacking System Audits And
Assisting With OEM During 3 Years Survey.
 Specialist At Crane Gearboxes Rebuild # 3 &4 ForBooms, Hooks And
Swings (Marathon Le-Tourneau Manufacture).
 Specialist At Skidders, Anchor Winches & Raw Water Towers
Gearboxes (Marathon Le-Tourneau Manufacture).
 Assisted During Jacking Trial For New Rig (MAKASIB &
MUHIYIMAT) Built At (Marathon Le-Tourneau Manufacture),
(Lamprell Shipyard-Ajman).
 Specialist In Centeral Lubrication Systems, Fixation Systems (Leg
Shocks) And Shock Pads (Hitachi Rigs).
 Carried Out Annual Jacking System Audit (OTD Manufacture).
 Assisted During Jacking Trial For Rig (Perro Negro 3-Saipem), (BLM
Manufacture).
 Working With National Drilling Company From July, 2014 Till Agust,
2016 As A Engineer (Assets Control), Responsible For All Back-Up
Pool Equipment Belong To The Company.