The document provides instructions for disassembling and assembling various components of an excavator control valve, including:
1) Removing and installing a proportional valve, solenoid, bracket assembly, and cartridge.
2) Assembling resolver valves, installing seals and spools, and positioning valve covers.
3) Installing actuator groups, line relief valves, flow compensator valves, and mounting covers.
The summary covers the key components being disassembled/assembled and the high-level steps involved while keeping within the 3 sentence limit. It does not include part numbers or technical details.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01674415
Control Valve - Disassemble - Proportional Valve
SMCS - 5051-015
Disassembly Procedure
Illustration 1 g00864935
1. Remove bolts (1) and valve group (2).
1/2
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g00864942
2. Remove nut (3) and solenoid (4).
Illustration 3 g00864965
3. Remove bolt (5) and bracket assembly (6). Remove cartridge (7).
Illustration 4 g00864984
4. Remove O-ring seals (8) from cartridge (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 15:36:33 UTC+0800 2020
2/2
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01659183
Control Valve - Assemble - Attachment, Bucket, and Boom
SMCS - 5051-012
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
Illustration 1 g00854185
1. Install plugs and O-ring seals (80).
1/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00854173
2. Assemble resolver (71). Install ball (73) in valve (74). Install seat (72). Install backup rings
(76) and (79). Install O-ring seals (75), (77), and (78).
Note: Reduce the temperature of seat (72) before inserting the seat into the bore of valve
(74).
Illustration 3 g00854162
3. Install resolver (71). Tighten the resolver to a torque of 50 ± 10 N·m (37 ± 7 lb ft). Install
stems (68), (69), and (70). Install plugs and O-ring seals (67).
2/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 4 g00854153
4. Install O-ring seals (66). Install plug (65) and the O-ring seal.
Illustration 5 g00854149
5. Position cover (64) and install bolts (63).
Illustration 6 g00854122
6. Assemble resolver valve (57). Install backup rings (59) and (60). Install O-ring seals (58),
(61), and (62).
3/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 7 g00854098
7. Install plugs and O-ring seals (56). Install resolver valve (57). Tighten the resolver valve to
a torque of 50 ± 10 N·m (37 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
4/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g00854070
8. Install O-ring seal (51), spacers (52), spring (53), and valve (54) in body (55). Install plug
(50).
Illustration 9 g00854005
9. Install backup rings (45) and (48). Install O-ring seals (46), (47), and (49).
5/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g00853986
10. Install differential valve (44). Tighten the differential valve to a torque of 235 ± 10 N·m
(173 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 11 g00853964
11. Assemble all of the solenoid assemblies. Install springs (40), (41), and (42). Install retainer
(43).
6/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 12 g00853948
12. Use Tooling (A) to install retaining ring (39).
Illustration 13 g00853913
13. Install O-ring seals (37) and (38).
Illustration 14 g00853771
14. Install valve (33), spring (34), O-ring seal (35), and solenoid (36).
7/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 15 g00853770
15. Install bolts (32).
Illustration 16 g00853768
16. Install pistons (29). Install plugs and O-ring seals (30). Install O-ring seals (28) and (31).
Install spacer (19).
Illustration 17 g00853767
17. Use a hoist and a lifting sling to position actuator group (26) and install bolts (27). The
weight of the actuator group is approximately 28 kg (60 lb). Position bracket assembly (24)
and install bolts (25).
8/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 18 g00853766
18. Install spacer (19). Use a hoist and a lifting sling to position actuator group (23) and install
bolts (21). The weight of the actuator group is approximately 28 kg (60 lb). Position bracket
assembly (20) and install bolts (22).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 19 g00856084
9/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 19. Install backup rings (12) and (16). Install O-ring seals (13), (14), (15), (17), and (18).
Assemble line relief valves (10) and (11). Tighten nut (17A) to a torque of 80 ± 10 N·m
(59 ± 7 lb ft). Tighten nut (18A) to a torque of 33 ± 5 N·m (24 ± 4 lb ft).
Illustration 20 g00853764
20. Install line relief valve (11). Tighten the valves to a torque of 300 ± 40 N·m (220 ± 30 lb ft).
Illustration 21 g00853763
21. Install line relief valves (10). Tighten the valves to a torque of 300 ± 40 N·m
(220 ± 30 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 25 g00853759
25. Position cover (2) and install bolts (1).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 15:37:30 UTC+0800 2020
12/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01669933
Control Valve - Assemble - Right Travel, Left Travel, and
Stick
SMCS - 5051-012
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
Illustration 1 g00863333
1. Install plugs and O-ring seals (83).
1/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g00862663
2. Install spools (80), (81), and (82). Install plugs and O-ring seals (79).
Illustration 3 g00862523
3. Assemble resolver valve (27). Install ball (74) in valve (27). Install seat (72). Install backup
rings (77) and (78). Install O-ring seals (73), (75), and (76).
Note: Reduce the temperature of seat (72) before inserting the seat into the bore of valve
(27).
2/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 4 g00862501
4. Assemble resolver valves (66). Install backup rings (70) and (71). Install O-ring seals (67),
(68), and (69).
Illustration 5 g00862404
5. Install resolver valves (66). Install plugs and O-ring seals (65).
Illustration 6 g00862399
6. Install O-ring seals (64). Install plug (63) and the O-ring seal.
3/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 7 g00862397
7. Position cover (62) and install bolts (61).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
4/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 8 g00862390
8. Assemble differential relief valves. Install O-ring seal (56), spacers (57), spring (58), and
valve (59) into body (60). Install plug (55).
Illustration 9 g00862383
9. Install backup rings (50) and (53). Install O-ring seals (51), (52), and (54).
5/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 10 g00862381
10. Install differential valve (49). Tighten the differential valve to a torque of 235 ± 10 N·m
(173 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 11 g00862378
11. Assemble all of the solenoid assemblies. Install springs (45), (46), and (47). Install retainer
(48).
6/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 12 g00862376
12. Use Tooling (A) to install retaining ring (44).
Illustration 13 g00862301
13. Install O-ring seals (42) and (43).
Illustration 14 g00862297
14. Install valve (38), spring (39), O-ring seal (40), and solenoid (41).
7/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 15 g00862287
15. Install bolts (37).
Illustration 16 g00862276
16. Install pistons (35). Install plugs and O-ring seals (36). Install O-ring seals (33) and (34).
Install spacer (32).
Illustration 17 g00862251
17. Install spacer (32). Use a hoist and a lifting sling to position actuator group (31) and install
bolts (30). The weight of the actuator group is approximately 28 kg (60 lb). Position bracket
assembly (29) and install bolts (28).
8/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 18 g00862206
18. Use a hoist and a lifting sling to position actuator group (26) and install bolts (25). The
weight of the actuator group is approximately 28 kg (60 lb). Position bracket assembly (24)
and install bolts (23). Install resolver (27). Tighten the resolver to a torque of 50 ± 10 N·m
(37 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 19 g00863089
9/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 19. Install backup rings (17) and (20). Install O-ring seals (16), (18), (19), (21), and (22).
Assemble line relief valves (10) and (11). Tighten nut (21A) to a torque of 80 ± 10 N·m
(59 ± 7 lb ft). Tighten nut (22A) to a torque of 33 ± 5 N·m (24 ± 4 lb ft).
Illustration 20 g00862180
20. Install line relief valve (15). Tighten the valve to a torque of 300 ± 40 N·m (220 ± 30 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 21 g00862158
21. Assemble load check valves (5) and (6). Install boss (14) and spring (13) in valve (12).
10/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 22 g00862129
22. Assemble flow compensator valve (7). Install spring (8), sleeve (9), and spring (10) in valve
(11).
Illustration 23 g00862111
23. Install load check valves (5) and (6) and flow compensator valve (7).
11/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...