1. #24 Flamingo St. Blk 24 Lot 9
Phase 1 Pacita 2, San Pedro,
Laguna
Mobile no. 09228950042
Email:rasselldomnicgo@yahoo.com
Rassell Domnic B. Go, ECE
Objective To obtain an engineering position in telecommunications where
I can use my strong analytical, detail-oriented, interpersonal
skills and competencies while engaging in new challenges and
learning experiences in your company.
Education
2003–2008 Ateneo de Davao University
B. S. Electronics and Communications Engineering
1999 – 2003 Notre Dame of Cotabato, Inc.
Secondary Level
2nd
Honorable Mentioned
School Officer
1993 – 1999 Notre Dame University – Elementary Training
Department
Primary Level
Exam Taken
Job Experience
Passed the Electronics Board Exam (Nov. 2008)
- 85.20 % Passing Rate
- License number: 43660
One Commerce International Corporation
Technical Engineer /Product Manager / Design Engineer
- June 1, 2010 to Present
Job Description:
1. Plans and Designs product and solutions to
comply/exceed with the client requirements
2. Draw up tactical advantage in product positioning
3. Prepare well-studied product presentations
4. Understand SWOT Analysis technically and highlights
strengths and weaknesses
5. Provide Cost effective Bill of Quantities per design
6. Prepares Test plans and Supervise Proof of Concept
7. Conduct Internal and External trainings relating to
product
8. Actively involved in troubleshooting activity whenever
there’s a reported problem on assigned product
2. 9. Prepares Standard Engineering procedures, installation
manuals and commissioning guides, preventive
maintenance guidelines.
Projects Handled:
Globalink Holdings Wireless Connectivity Project
(2014)
Studied Globalink Network functionality and provide
accurate and cost-effective solution to serve IP Network
Requirement. Conduct Proof of Concept and accomplish
the approved test plan. Handle the installation,
commissioning and acceptance of the network
Result: Globalink is satisfied to its Wireless Network,
they prefer the provided solution whenever there’s a
needed wireless connectivity.
NGCP Power Plant Connections (Malaya and
Angeles Power Plant) (2014)
Provide wireless connectivity from every Independent
power plant producer to NGCP substations. Provide link
study and analysis. Integrates SCADA systems to
Microwave Radio link.
Result: On-going project, Equipment tested and ready
for installation
Philcom IP Backhaul Project (2011)
Provide initial site and link analysis. Study the radio link
using path design calculations. Conduct Radio Frequency
Interference test to provide accurate frequency
allocations. Arrange all NTC requirements (Permit to
Possess, Construction Permit and Radio Station License)
Result: Properly designed the network, all microwave
radio links are properly installed and is working correctly
according to the design
Upgrade of TELOF VISAYAS Radio Backbone to MW
IP-Based System (2013)
Provide initial table engineering study of Telof Visayas
Network. Conduct radio link analysis using path design
calculations (pathloss). Conduct Radio Frequency
Interference test to provide accurate frequency
allocations. Arrange all NTC requirements (Permit to
Possess, Construction Permit and Radio Station
License). Conduct on-site Operation and Maintenance
training to TELOF personnel on site.
Result: Network working properly. No major problems
encounter during installation, commissioning and
stability period this is due to network is properly
designed. On-going discussion of Phase 2 project
3. ABS-CBN DSTL Project (Studio to Transmitter
Links) (2011-2014)
Provide initial table engineering study of all ABS-CBN
nominated sites for connectivity. Conduct radio link
analysis using path design calculations (pathloss).
Conduct Radio Frequency Interference test to provide
accurate frequency allocations. Arrange all NTC
requirements (Permit to Possess, Construction Permit
and Radio Station License). Conduct on-site Operation
and maintenance training to ABS-CBN personnel. Serves
3-years of Service Level Agreement (SLA).
Result: Well-planned Microwave Network. Minor
problems encountered but is properly addressed and
documented to prevent occurrence. ABS-CBN is satisfied
of the offered service and SLA will be renewed for
another 3 years.
NGCP SDH Backbone (2010-2011)
Installation and Commissioning of Tejas 100ME
Multiplexer. Equipment deployed at NGCP Visayas sites.
Full integration of multiplexer to NGCP SCADA networks
and also includes Network monitoring.
Result: Equipment properly installed and
commissioned. No major problems encountered.
Globe BTS Multiplexer Project (2010-2011)
Installation and Commissioning of Tejas 1100
Multiplexer. Equipment installed to provide last-mile
fiber connectivity from Globe network to customers.
Equipment deployed at Northern Luzon area.
Result: Equipment properly installed and
commissioned. No major problems encountered.
Meralco Medium Voltage Project 11MW Radio
Links (2011-2012)
Provide initial table engineering study of Meralco
nominated sites for connectivity. Conduct radio link
analysis using path design calculations (pathloss).
Conduct Radio Frequency Interference test to provide
accurate frequency allocations. Conduct site installation,
commissioning and acceptance.
Result: Equipment properly installed and
commissioned. No major problems encountered.
4. Training (OJT)
Achievements
Philippine Navy Microwave Link Project (2012-
2013)
Provide initial table engineering study of Navy 6
nominated sites for connectivity. Conduct radio link
analysis using path design calculations (pathloss).
Conduct Radio Frequency Interference test to provide
accurate frequency allocations. Conduct site installation,
commissioning and acceptance.
Result: Equipment properly installed and
commissioned. No major problems encountered.
Zimmons Industries
Technical Engineer
- August 1, 2009 to June 30, 2010
-
Job Description:
1. Design controllers for automation using PLC
2. Commission and integrate PLC programs to different
transducers, motors and pumps
3. Variable Frequency Drive programming and
parameterization
4. Conduct preventive and corrective maintenance of all
equipment of a Mining Company (Philsaga)
Monitor and maintain operation of a mine
lifting shaft (winder)
Monitor and maintain major controllers
(water pump, pressure gauge and sensors)
SMART Telecommunications, Davao City
SMART Microwave Division
April – June, 2007
Able to gain experience with the GSM systems and
networks
Basic Microwave Radio design and Frequency planning
Consistent Honor Student in Secondary level (1999 – 2003)
5. Affiliations
Seminars and
Trainings
Interests and Skills
Academic Scholar of Notre Dame of Cotabato Inc.
3rd
Placer in Metrobank Regional Math Contest (2003)
Institute of Electronics Engineers of the Philippines, Inc.
(IECEP)
Ceragon Microwave Radio Seminar
December 2011
Cover Radio Engineering design and pathloss tool analysis
TJ1600 Network Management System Technical Training
August 2010
Ceragon Microwave Radio Training and NMS Functionality
Sept. 24 -28, 2013
Covers link design and interference planning
Network Management System training
Basic and Advance Training Course of TJ1400 NMS and Clock
Source
May 29-30,2014
CommunicAsia 2014 / BroadcastAsia 2014
June 10-14, 2014
Attend communications and technology conferences.
Look for different suppliers and partners that best fit
opportunities here in the Philippines
Computer literate, knowledgeable in Microsoft Offices and
Application, Adobe Acrobat Professional and Photoshop.
Basic background in AutoCAD, Java Programming, MySQL,
and Programmable Logic Control.
Troubleshoot, Install and Commission MW Radio
(IDU/ODU), SDH Multiplexers and fiber related equipment.
Configure Media Converters. Able to operate different
network equipment and tools like Ethernet, TDM, SDH
Testers, Spectrum Analyzers.
6. Can work under pressure, multi-tasking, fast learner,
Driving skills
Personal Profile Nickname : Raz Birthday : August 9, 1986
Age : 28 yrs. old Place of Birth : Cotabato City
Sex : Male Nationality : Filipino
Status : Married Religion : Roman Catholic
I hereby certify that the above statements are correct
Rassell Domnic B. Go, ECE