1. CURRICULAM VITAE
RAJ KUMAR SHARMA
38-B, R.B.I. COLONY,
SHALIMAR BAGH,
NEW DELHI-110088
Phone No: +91-08800865332, 09650900992.
E-mail: shyboyrajsharma03@gmail.com
E-mail: shyboy_raj@rediffmail.com
OBJECTIVE
To be a part of your reputed organization and grow within the industry to the zenith of its
organizational hierarchy and to enhance my skills while contributing towards the success of the
organization.
SUMMARY
B.TECH with Applied Electronics & Instrumentation stream from UTTAR PRADESH
TECHNICAL UNIVERSITY LUCKNOW (U.P.)
Ability to support and sustain a positive work environment that fosters team performance.
Strong communication and analytical skills.
EXPERIENCE, 9 YEARS
Currently working with SMS INDIA PVT. LTD (SMS GROUP), as a Senior Manager in
Industrial Electrical & Automation Division from April 1, 2011 till date.
SMS GROUP is a STEEL plants OEM which provides full plant installations, electrical as well as
mechanical i.e. Blast Furnace, Basic Oxygen Furnace BOF, Ladle Furnace LF, Casters, CSP,
Rolling Mills, Processing lines etc.
KEY SKILLS
PLC/SCADA Programming, SIEMENS PLC, PCS7, SIMATIC MANAGER, WinCC,
LADDER, STL, CFC, Control systems and process automation.
Sound Knowledge of electrical control panels, MCC & smart MCC (Simocode), Switchgears.
Technical project management and project execution skills with customer dealing.
Good knowledge of Instruments & their communication protocols
i.e. direct wired, Industrial Ethernet, Profibus, PA Bus.
2. Projects commissioning/Automation Services in SMS India are as follows:
Projects:
Currently working on RH degasser project, TATA STEEL Jamshedpur .
Vacuum Degasser , Electric Arc Furnace , KSPL Hyderabad.
Ladle Heat Furnace (LHF1 & LHF2) IISCO STEEL (SAIL), Burnpur, West Bengal.
Caster, JINDAL SOUTH WEST (JSW) Bellary, Karnataka.
Continuous Caster (CSP), TATA STEEL, Jamshedpur.
Electric Arc Furnace (EAF), JINDAL STEEL LTD., Jajpur, Odisha.
Previously worked with AUTOMATION ENGINEERS A.B. Pvt. Ltd, PATPARGANJ, Delhi.
(An authorized SIEMENS system house) as an Assistant Manager, Commissioning
PLC, SCADA, HMI department from Feb.2008 to March 2011.
Previous on-site Commissioned Projects:
Project: ESSAR STEEL HOT-ROLL CUT TO LENGTH (CTL)
LINE.(BAHADURGARH HARYANA)
Features: Commissioned with SINAMICS AC DRIVES ,S7300 CPU & a
KTP1000 basic DP HMI panel. Hot roll of dia 2mm - 12mm thickness at 30 mpm is
cutted down at a length of 2000mm – 6500mm.
Communication protocol: SIEMENS Profibus communication.
Project: SS REWINDER-3024 UTTAM STRIPS PVT. LTD.BHIWADI (RAJASTHAN)
Features: Stainless steel rewinding line. USS communication with UNCOILER & RECOILER
DC drives PLC S7-200 & an operating panel TD200C.
Project: K.R. PULP & PAPERS LTD, 700 MPM LINE (SHAHJAHANPUR) (U.P.)
Features: Commissioned with CPU S7-315-PN DP, 44 sectional drives.
SINAMICS, 6 TOUCH PANELS as HMI & one Engineering station with WinCC
as SCADA & SIMATIC MANAGER as PLC software.
Communication Protocol: Ethernet & Profibus.
Project: ABC PAPERS LTD. (HOSHIARPUR) 900 MPM LINE
Features: Commissioning was done with SIEMENS S7-400 CPU, 2 engineering
stations with WinCC as SCADA & SIMATIC MANAGER as PLC software, 6
TOUCH PANELS & 22 DRIVES.
Communication Protocol: Profibus, Ethernet & peer to peer.
Project: CUT TO LENGTH (CTL) BHUSHAN POWER & STEEL, CHANDIGARH.
Features: CTL/CUT TO LENGTH is a machine for cutting of metal sheets i.e. steel, with
fine mm length. Machine was comprises of 4 drives on uncoiler, leveller, feed roll
& conveyor, S7-300 CPU, OP177B operating panel.
Project: PAHARPUR-3P DECHROME/DEGREASING MACHINE.
Features: The machine is comprises of many pneumatic valves, pumps, drive to run
Motor, HMI, high current (900A) rectifier, level sensors etc. A high current
of approx. 900A dechromes or degreases layer of chromium & grease from
the cylinder when it rolls in a pool of solution. The project was
3. commissioned with PLC S7200, TD200 operating panel.
Project: KTSN GERMANY GLOVE BOX TESTING MACHINE
MINDA CORPORATION NOIDA
Features: The machine was made to test car glove box components. Machine was
comprises of different optical, proximity sensors, 4 pneumatic cylinders,
Automatic test marker etc. The project was totally plc based using CPU
S7-200 (SIEMENS) & TD200C operating panel.
Project: PROPERZI#4 HINDALCO ADITYA BIRLA GROUP (Renukoot, U.P.)
Features: Machine was having 4 motors i.e. mill motor, coiler north & south, casting
wheel. It is a process of making initial metal rod (aluminium 9.5 to 15 mm
dia) continuously casted and coiled with these four motor wheels, which is
further used for making cables. The project includes total commissioning of
plant with PLC S7-300/DRIVES DC MASTER programming & HMI
Multi Panel MP277 10 touch. (SIEMENS)
Project: MONET DANIEL COAL WASHERY (RANCHI)
Features: The project was comprises of S7-400 redundant CPUs , 2 redundant
operating stations with WinCC as SCADA & one engineering station with
SIMATIC MANAGER for monitoring & controlling of PLC & 66 motors for
conveyor of coal & other process operations
Many PLC, SCADA & HMI jobs are also included that may not be discussed here in detail so I am
declaring some of them in brief :
NAINI TISSUES & PAPER LTD, HOMOFURNACE (HINDALCO), EDGE TRIMMER
(INDONESIA), CONSOLIDATE COINS (FARIDABAD), HIGH SPEED DRY
LAMINATION MACHINE (UFLEX NOIDA) , GUTERMANN (HARYANA), SRF
POLYSTER FILMLINE (KASHIPUR), STAR PAPERS LTD. (SAHARANPUR),
DELHI AIRPORT METRO EXPRESS (P) Ltd. (DEME) PLATFORM SCADA,
REWINDER-SABER PAPERS LTD. ( UNA, HIMACHAL), GRG STEEL CUT TO LENGTH
LINE (CTL LINE)
PERSONAL DETAILS
Father’s Name : Mr. Joginder Sharma
Date of Birth : 30th October 1985
Languages Known : Hindi and English
Hobbies : Diary writing, Net Surfing
Nationality : Indian
Marital Status : Married
DECLARATION
I hereby declare that all the information mentioned above is true to the best of my
Knowledge.
PLACE: NEW DELHI RAJ KUMAR SHARMA