1. CARRICULAM VITAE OF SHYAM SEVAK GUPTA
B.Tech (Electrical Engineering)
Electrical Engineer with 23+ Years of Experience in Basic & Detail Engineering, Electrical
& Instrumentation in EPC Projects
Contact Number: RES TEL: 033-2583-2988; Mobile: 9830605933(P)
Email:shyamsevakgupta@yahoo.com,shyamsevakgupta@gmail.com
Personal Details
NAME SHYAM SEVAK GUPTA.
CONTACT ADDRESS 27 S.S. TEMPLE ROAD.
P.O: KHARDAH.
DT: NORTH 24 PARGANAS
WEST BENGAL.
PIN- 700117
INDIA
DATE OF BIRTH 12th
JANUARY, 1966
NATIONALITY INDIAN (By birth)
MARITAL STATUS MARRIED
YEAR OF PASSING 1991
DETAILS OF ACADEMIC QUALIFICATION
ACADEMIC QUALIFICATION B.TECH in ELECTRICAL ENGINEERING from
“National Institute of Technology (Former Regional
Engineering College) “Warangal
Certificate in " UNIX Operating System from ETDC,4/2 B.T. ROAD , KOLKATA -700035.Govt of West
Bengal. YEAR: 1994 (Nov-Dec).
CAREER OBJECTIVE & GOAL:
To Take Challenging role with Leadership Capacity in a Target Oriented & Professionally managed
Engineering Company as a Process Based Technology Suppler as EPC Contractor or an Engineering
Consulting House as with a minimum capacity of Dy.GM or above Electrical, Automation &
Instrumentation. From Basic & Detail Engineering, Project Management, Procurement Support,
Site Co-Ordination to Commissioning including Pre Bid Engineering & Inter action with Client &
Consultant with business development assistance.
KEY COMPETENCIES:
• Leadership Capacity with Planning, Scheduling and Monitoring
• Strong Engineering Concept with Electrics, Automation & Instrumentation
• Analytical with Strong Decision making capacity
• Value Engineering & Self learning.
• Resource planning and utilization & optimization.
• ETAP,ACAD,PLC Programming,SCADA
SUMMARY OF TECHNICAL EXPERTISE:
Complete Electrical Distribution System of Process Plant Electrics up to 11 KV and 33 KV
Incomer Feeder-Isolator,HT/LT Switch Board,Transformer,Bus Duct, Power Cable etc
Complete Field & Analytical Instruments of Process Plant.
Preparation of Load list, Single Line Diagram
Complete Automation System with PLC/DCS,SCADA/HMI, Control Desk etc
Surveillance & Annunciation System like CCTV, FDA, LSTB etc.
Complete E&I System Engineering
TYPES OF DOMAIN SERVED:
METAL-STEEL & ALUMINIUM
MATERIAL HANDLING
WATER TREATMENT & WASTE WATER MANAGEMENT
SUMMARY OF PROFESSIONAL EXPERIENCE:
Present Employer:
ORGANISATION: HAMILTON RESEARCH & TECHNOLGY PVT LTD (A Joint Venture between
SKJ & JS Group .A Kolkata based Engineering Company working with Aluminum Process
Plant.
WORKING SINCE: August 2014
Present Designation: General Manager –Project & Engineering (E&I)
1
2. ROLE & RESPONSIBILITY: As an vertical Head of a SBU for Design & Detail Engineering
Service of E &I for Industry Process Plant EPC Projects including Electrical, Automation &
Instrumentation
to Lead a team of Instrumentation & Electrical Engineers and Managers as well monitoring and
assist the marketing team. Leadership with technical expertise in Complete E&I
PROJECTS HANDLED:
For Business Development with the EPC contractors & Consulting Houses.
Over all Technical Head.
Detail Engineering of Coal Pile Filtration Unit of 2 X 67.5 MW Thermal Power Plant at
Bhubaneswar,Odisha. Of Complete E&I Package on behalf of Eureka Engineering.
Detail Engineering of Filtration Plant of Hot Strip Mill, SAIL, and RSP by L&T Water
for E&I Part on behalf of Eureka Engineering.
Previous Employer:
ORGANISATION: ASTHA TECHNICAL SERVICE LTD (An Associate of Ion Exchange for Design &
Detail Engineering Service)
WORKING SINCE: September 2011 to May 2014 (In continuation to Previous Company)
Designation: Deputy Chief Engineer (C&I)
ROLE & RESPONSIBILITY:As C&I Head and Associate Lead Role in Electrical
Department to Lead a team of Instrumentation & Electrical Engineers and Managers for
Monitoring, Control and Technical Guidance and supervision along with client and consultant
interaction and provide Pre Bid engineering support.
PROJECTS HANDLED:
For Ion Exchange Infrastructure Kolkata
Complete Engineering of External Water Supply System for New CRM Complex
CRM-III) of SAIL, Bokaro (Under execution)-Electrical, Automation &
Instrumentation.
Complete Engineering of RW, MW & DW System at JSPL, Angul-Electrical,
Automation & instrumentation.
Complete Engineering of Water Treatment, Pre Treatment & DM Water System at 2
X 685 MW Power Plant at GMR, Chhattisgarh Power Project-Electrical, Automation
& Instrumentation
For Ion Exchange India:
Water System for Satpura Thermal Power Plant(As a consortium partner of Mc-
Nally Bharat Engineering, Kolkata)
Water Treatment, Pre Treatment & DM Water System at Reliance Energy,
Sasan.)
Water Treatment Plant at CESC Haldia(HEL)
CPU unit at Sagardighi TPP,PDCL WB
Water Treatment Plant at JSW Bellary for Caster & BRM
Water System for Singereni Thermal Power Plant-Singereni Collieries Ltd.
For Ion Exchange Waterleau India:
Bio ETP at JSPL, Angul.
ETP for Rileance,Silvassa
ORGANISATION: ION EXCHANGE INFRASTRUCTURE LTD
A Kolkata based leading & rapidly growing EPC Company with ongoing projects on Water
Treatment Plant in Various Industry.
WORKING SINCE: DECEMBER, 2009 to September 2011
Present Designation: Senior Manager-Design(C&I)
ROLE & RESPONSIBILITY:As C&I Head and Associate Lead Role in Electrical
Department Complete responsibility for Engineering of C&I and part of Electrics-to lead a
team of Instrumentation & Automation Engineers and Managers for Basic & Detail
Engineering with Necessary follow up, interaction and discussion with the Consultant of
Project Owner like MECON Limited & SAIL for necessary approval for all C&I and Electrical
drawing and documents for necessary approvals also monitoring of Project execution with
the interaction with construction team and Pre Bid Engineering and Tender Documentation
2
3. and Costing of EPC Tender.
PROJECTS HANDLED:
Design & Engineering of total C&I and part of Electrics with Intelligent MCC,PCC,PLC, Field
Instruments, AN Oil Type Transformer,Illumination,HT & LT Motors etc including UPS of 2.5
MTPA Expansion of Stream project (WTP) at SAIL/IISCO Burnpur.
Design & Engineering of total C&I and part of Electrics with Intelligent MCC,PCC,PLC, Field
Instruments, AN Dry Type Transformer with VCB isolator ,Illumination System,HT & LT
Motors etc including UPS of Water Supply System for New CRM Complex of SAIL,Bokaro.
RW, MW & DW System at JSPL, Angul-Complete C&I and partly electrics
Water Treatment, Pre Treatment & DM Water System at 2 X 685 MW Power Plant at GMR,
Chattisgarh Power Project.
ORGANISATION: PROCESS AUTOMATION ENGINEERS LTD
A Kolkata based Electrical & Automation Company and an associate of ION Exchange India
Limited.
WORKING SINCE: DECEMBER, 2007, Presently Defanged since August 2009
Present Designation: Senior Manager-Project & Development
ROLE & RESPONSIBILITY: Technical Head with a responsibility to lead a Team of Project
Manager, Senior Engineers & Automation Engineers for Project Management ,Design &
development and providing backup support in Project marketing for Companies Automation
related EPC business with Design,Engineering,Development and monitoring from P&I
Diagram, Single Line Diagram and Control Philosophy.
FUNCTIONAL ROLE:
Business Planning
Project Scheduling, Monitoring & Cost Control
Vendor Development & Contract management
MIS & Cash Flow Preparation
Technical administration and Cost Center Planning
Expertise in Detail Engineering
Bid evaluation and Proposal Engineering
Manpower planning
PROJECTS HANDLED:
Project Details executed under my supervision:
PLC based weathering control system in tea processing industry.
Desalination plant automation using Rockwell Control Logix Hot standby PLC system at
GACL,Gujrat
Desalination plant automation using Rockwell Controllogix Hot standby PLC system at ADANI
Power Project,Gujrat
Engineering & Control Philosophy preparation of Reliance Jamnagar Export Refinery ETP project
Water System Automation for Reliance Energy ,ROSA 2 X 300 MW Thermal Power Plant using
Rockwell Control Logix Hot standby PLC System
PLC based Calibration Test Bench for Gas Flow Meter at GREATER CALCUTTA GAS SUPPLY
CORPORATION, (W.B GOVT undertaking) with Rockwell PLC.
Other Employer:
ORGANISATION: HAMILTON RESEARCH & TECHNOLOGY PVT LTD(HART)
A Kolkata based Electrical & Automation Company.
WORKING SINCE: JULY, 2007, December 2007
Designation: Senior Manager-Techno Commercial
Role: Technical Lead for Industrial Automation Business for PLC,DCS,SCADA with
Focus in WBPHED WTP SCADA
ORGANISATION: DANIELI AUTOMATION INDIA LTD
a group of DANIELI spA, ITALY
WORKED FROM: Oct, 2006 to June, 2007
Designation: Assistant Manager-Automation
ROLE & RESPONSIBILITY: Software Development of PLC & HMI with SIEMENS & Rockwell
PLC, Wanderware Intouch as well Engineering for Transformer,Busduct,PCC, MCC, VFD,
Control Desk and Field Instruments for Different Steel Process related to Flat & Long Product
Rolling Mill application both for Indian Operation and Italy operation
3
4. PROJECTS HANDLED (In Danieli India):
Automation System at Plate Mill, SAIL BHILAI
Up gradation of Automation System at CRM-II of SAIL, Bokaro.
Involved in HMI development of WTP for Bloom Caster, DSP with Wonderware In touch with
SIEMENS S7-400 PLC with Ethernet connectivity.
Automation Software in ARC Furnace, ASP with Rockwell RSLogix 5000 and Compact logic
Processor.
PROJECTS HANDLED (In Danieli Italy):
Developed a software for Auxiliary service PLC of a Bar Rolling Mill of Bangladesh for SIEMENS
S7-400 PLC,CPU 416-2DP,with Ethernet connectivity with Mill speed and Shear PLC and
Wonderware Intouch 9.5 HMI station, having 3 No’s RIO station and 9 No’s remote Local Control
Station at DANIELI Automation, Italy office.
Developed the software for Roll changing robot for Bar Rolling Mill Bangladesh for SIEMENS S7-
300 PLC, CPU 315-2DP and 1 Profibus at DANIELI Automation, Italy office.
Developed involved software with SIEMENS STEP7, V5.4 for PLC S7-300, CPU 315-2DP for a Roll
Changing Robot for a bar rolling mill of POLAND.
ORGANISATION: DC Industrial Plant Services (P) Ltd
DCPL Group EPC Company involved in Power Plant Ash Handling
WORKED FROM: SEPT, 2006 to OCT, 2006
Designation: Manager-Instrumentation
Role: Design, Basic & Detail Engineering for Plant Electrics, Instrumentation, Automation of Ash
Handling System for Sagardighi 2 X 350 MW TPP of WBPDCL.
ORGANISATION: SCITECORP BUSINESS SOLUTIONS (P) Ltd an Engineering
Service Provider for SIEMENS VAI.
WORKED FROM: OCT, 2005 to July, 2006(Defanged)
Designation: Manager-Engineering & Automation
Role & Responsibility as a Technical Head of Engineering & Automation:
To Lead a Team of Sr. Automation Engineers, Automation Engineers & Trainee Automation
Engineers for different area of Industrial Automation Project & Project Management mostly
using Rockwell Automation range of PLC’s and SIEMENS SIMATIC series PLC, SCADA & DRIVES
as well with Intellution, Wonderware, OMRON, GEFANUC etc for Complete System Engineering,
PLC Programming, Networking as well SCADA Front-end design and configuration, monitoring,
execution and expertise under time frame. For the activities as:
• Panel Engineering, Wiring Diagram, Cable scheduling for field device interfacing
• Preparation of BLD, PLC Programming, SCADA configuration and commissioning and
conducting training at customers end.
• Detail Engineering on Plant Automation & Switch Board.
• MIS & Techno Commercial Activities
PROJECTS HANDLED:
On behalf of SIEMENS VAI:
Involved in a large Plate Mill project as Level-I Automation team partner under” SIEMENS-
VAI EA”, Kolkata using Simatic S7-400 & Simatic TDC Hardware with PSC7 environment
and WINCC with Profibus & Ethernet communication protocol.
Involved in Engineering Design & Documentation for 130 Ton RH Degasser Project at SAIL
Bhilai Plant
Involved in Engineering Design and Documentation for 5 Stand CTCM at Essar Steel,Gujrat
On behalf of SIEMENS RSC:
Addition of Sensors for Thickness Measurement & Control System of Aluminum Sheet through
PROFIBUS using DP-DP coupler with the existing S7-400 PLC & WINCC SCADA based BLISS Mill,
at a large Aluminum Processing Plant of West Bengal, under SIEMENS A&D guideline.
Individually handled the modification of the S7-400/CPU414 at ITC, Munger for Leaf Moisture
Control System & Power Plant Control System using S7-300/CPU 315-2DP & WINCC at Bihar
Sponge Limited, Chandil.
Developed the control system for Empire Jute Mill, Titagarh for spinning Mill automation system
with S7-300/CPU 315-2DP, Micro Master Drive & WINCC.
4
5. ORGANISATION: STESALIT LTD, KOLKATA (ISO 9001 Company)
A Company involved in Equipment Design & Supply for Rolling Stock Application in Indian
Railway and Tea Process Industry.
WORKED FROM: Aug, 1999 to Oct, 2005
Designation: Senior Executive Engineer-Design
Role: Project Lead for Design & Development of Kolkata Metro Rail Rolling Stock
Electronics Solution for Motor Coach Automation & Control Systems Equipments
using PLC, SCADA & Discrete Control Electronics Components.
PROJECTS HANDLEDS:
PROJECTS EXECUTED IN LEAD ROLE:
TRACTION CURRENT CONTROLLER FOR BHEL COACHES FOR METRO RAILWAY, KOLKATA using “SIEMENS
SIMATIC S7” SERIES PLC. With “STEP7 Micro Win” Development Software, V3.2 & Midatek ICE6.5
SCADA interface under PC/PPI Protocol.
PLC BASED ELECTRONIC CONTROL CENTRE FOR NGEF RAKES FOR METRO RAILWAY, KOLKATA. Using
SIEMENS SIMATIC S7 PLC & STEP7 Micro win V3.2 & Midatek ICE6.5 SCADA Interface under PPI Protocol.
TRACTION CURRENT CONTROLLER FOR BHEL RAKE (VER 2) using ALLEN BRADLEY MICROLOGIX1500 PLC
under RSLOGIX 500 & WONDERWARE INTOUCH 8.0 SCADA INTERFACE under ABDF1 Full Duplex protocol
with DH485 bus for METRO RAILWAY, KOLKATA.
ELECTRONIC CONTROL CENTRE FOR NGEF RAKE (VER 2) using ALLEN BRADLEY MICROLOGIX1200 PLC
with RSLOGIX 500 & INTELLUTION FIX32 V7.0 SCADA INTERFACE under ABDF1 Full Duplex Protocol with
DH485 bus FOR METRO RAILWAY, KOLKATA.
Development of MOSFET based SERVO MOTOR DRIVE for METRO RAILWAY, KOLKATA.
ORGANISATION: SONODYNE ELECTRONICS CO LTD, KOLKATA
WORKED FROM: Feb, 1997 to July, 1999
Designation: Senior Executive (R&D)
Role: Product Design & Development of Power Electronics Items like Inverter, AC Drives for
Petrol Pump Motor Operation.
ORGANISATION: NON DESTRUCTIVE TEST APPLIANCES (P) LTD, KOLKATA
WORKED FROM: Aug, 1995 to Feb, 1997
Designation: Engineer (Electrical & Electronics)
Role: Design, Testing & Production of PLC Based Control Panel and Different Types of Electrical
Panels & Electronics NDT Instruments for Metallurgical Quality Control Applications for
Ordnance Factories, Railway & Steel Plants.
ORGANISATION: PRIME POWER CONTROL TECHNOLOGY (I) LTD, KOLKATA
WORKED FROM: Jan, 1992 to July, 1995
Designation: Engineer
Role: Design, Testing & Production of PLC Based Machines Building, MCC, AC/DC Drives, and
Control Panel and Power Supply Equipments.
I affirm, that the information’s furnished above are true up to the best of my Knowledge.
PLACE: KHARDAH.
Date: 9-Dec-15 (Shyam Sevak Gupta)
5
6. Applying for the Organization
Applying for the Position
Reference
6
7. Applying for the Organization
Applying for the Position
Reference
6