SlideShare a Scribd company logo
1 of 2
RAGHUNATH JANA
Vill-Gobindapur, P.O-Gobindapur + Bajitpur, P.S-Sutahata , Dist.-Purba Medinipur, PIN-721645
Telephone: 09083286278(M)
Email: raghu.eie@hotmail.com
KEY STRENGTHS

 Erection & Commissioning & Programming
 Preventive Maintenance 
 SLD,CTD in AutoCAD 2D
 Project Assist.

CARRIER SUMMERY
InstrumentationEngineer,offering 4.5 yearsof versatile experience inPowerplantOperation-
Maintenance & commissioning.
Successfullycompletedthe erection& commissioningofall E & I equipmentsfor12 MW CPP Project&
the unitis running at 70% PLF ( RASHMI METALIKS Ltd. Kharagpur, Sahachok)
Successfullycompletedthe full logicprogramming & commissioning ofall E & I equipmentsfor39TPH
WHRB Boiler ( RASHMI CEMENT Ltd. Jhargram, Jitusole)
Successfullycompletedthe full logicprogramming & commissioning of all E & I equipmentsfor
VRM(Vertical RollingMill) (RASHMICEMENT LTD U-III,JHARGRAM,BORIA)
PROFESSIONAL EXPERIENCE
Present Organization:
Rashmi Cement Ltd. (Power Division)
Designation: Sr. Engineer(Power Division)
Period: (june,12 to February,14) + (July to till now)
Boiler: CVL (6x10 TPH), TSPL (4x10.5 TPH),ISGEC(1X39TPH)
Type: Single Drum WHRB Boiler
Turbine: 1 x 18 MW Triveni
Alternator: TDPS (Toyo Denki Power System)
DCS: SIMENS (SIMENTIC PCS 7.0))
Functional Role: Maintenance andShifthandlingand also commissioning work of 12 MW Project at
Kharagpur.
Bhaskar Steel and Ferro Alloy Ltd. (SRMB Srijan Ltd. )
Raurkela
Designation: Asst. Engineer(Power Division)
Period: February-14 to June-14
Boiler: Thermax(1x22) and (1x38)
Type: AFBC Dual Drum
Turbine: 1 x 12 MW Triveni
Alternator: BHEL
DCS: Yokogawa(CENTUMCS-300)
Functional Role: Maintenance and Shift handling
CURRENT JOB PROFILE
 Calibration of Pressure Gauge & Pressure Switch.
 Installation of DI, DO, AI , AO Module in DCS panel & their hardware configuration in ES Station.
 Can derive Motor, Drive logic programming & interlocking logic in DCS Engineering station.
 Adding any AI,AO & DI,DO signal in DCS & also monitoring those signal in SCADA.
 Calibrationof I/PConverter,PositionTransmitter,Control valvepneumatic&electronics positioner.
 Troubleshooting of MotorizedControl Valves control systemfault&alsomaintenance work,(Auma,
Rotor).
 Maintenancesandoperationof control valves,ON-OFFPower cylinder, Regulated Power Cylinder,
Control valves (Air to open & Air to close), Solenoid valve, Pressure switch,DP Switch.
 Calibration of Thermocouples & RTDs with the help of Thermostat
 I/P & O/P Troubleshooting of PLC(ALLEN-BRADELY, SIEMENS) operation .
 Calibration of Flow, Temperature, Level Transmitter .
 Maintenance & operating of air Compressor’s oil filter, oil separator, MPV valve, check valve, &
cooler.
 Work in Frequency operator(PF)
 Breaker Maintenance & operating.
 Installation & setting of MPU & Vibration Sensor in Turbine, Gear box & Alternator.
 Calibration & tripping, almring setting of Temperature Scanner.
 Handling of HART calibrator & Source Meter.
 Solving any fault of Ash Handling System.
 Solving any type of interlocking in logic.
Drawing & Designing:
 Preparation of SLD , P& ID & Cable Schedules ,CTDs, Instrumentation Hook UP Drawing by Auto
CAD 2D.
TRAINING EXPERIENCE :
 Industrial Practical Training at INDIAN OIL CORPORATION LIMITED, HALDIA
REFINERY from 01ST OCT,2011 to 31ST OCT
SOFTWARE SKILS:
 Platforms : Windows
 Packages: AutoCAD 2D, MS Office, MS Project, ERP(Light House).
 Programming: DCS- Siemens Simatic Manager( PCS 7 ) , YOKOGAWA-CENTIUM-3000,
Programming Language-CFC,FBD, LAD.
SCADA-Siemens Wincc V7.0 & 7.2, Fix 32
PLC- Schneider Modicon-340(Software-Unity Pro XL, So Machine)
Siemens S7-1200(Software- TIA Version 13)
ACADAMIA
 Diplomaengineering in Electronics & Instrumentation Engineering from Dr. Meghnad Saha
Institute Of Technology under W.B.S.C.T.E. Board, Haldia in 2012 and Scored 84.3%
 Higher Secondary (10+2) in Science from Mahishadal Raj High School under W.B.C.H.S.E.
Board in 2009 and scored 76.4%
 Secondary (10) from Rampur Vivekananda Mission Vidyamandir under W.B.B.S.E. Board in
2007 and scored 80.5%
PERSONAL PROFILE
Father’s Name : Kalipada jana
Date of birth : 02/12/1991
Gender : Male
Marital Status : Single
Language known : English, Hindi, Bengali,Oria
Interests :Playing Cricket, Football & Listening Music
DECLARATION
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the
responsibility for the correctness of the above-mentioned particulars.
Date-31/08/15 Signature

More Related Content

What's hot

What's hot (20)

T.chandramouli O & M_Electrical
T.chandramouli O & M_ElectricalT.chandramouli O & M_Electrical
T.chandramouli O & M_Electrical
 
Resume Haris
Resume HarisResume Haris
Resume Haris
 
ANAND TALSANIYA CV
ANAND TALSANIYA CVANAND TALSANIYA CV
ANAND TALSANIYA CV
 
CV 2016 new
CV 2016 newCV 2016 new
CV 2016 new
 
Muhammad Rizwan.
Muhammad Rizwan.Muhammad Rizwan.
Muhammad Rizwan.
 
Resume
ResumeResume
Resume
 
Vijay Sagar Resume
Vijay Sagar  ResumeVijay Sagar  Resume
Vijay Sagar Resume
 
ir_auto_12
ir_auto_12ir_auto_12
ir_auto_12
 
DINESH parmar resume
DINESH parmar resumeDINESH parmar resume
DINESH parmar resume
 
Resume Haris
Resume HarisResume Haris
Resume Haris
 
AMIT (1)
AMIT (1)AMIT (1)
AMIT (1)
 
Engr.kamran shahid cv
Engr.kamran shahid cvEngr.kamran shahid cv
Engr.kamran shahid cv
 
Business Developement
Business DevelopementBusiness Developement
Business Developement
 
new cv june
new cv junenew cv june
new cv june
 
S m umer wasi
S m umer wasiS m umer wasi
S m umer wasi
 
Paveen resume
Paveen resumePaveen resume
Paveen resume
 
S M UMER WASI
S M UMER WASIS M UMER WASI
S M UMER WASI
 
PRANTIK_Resume_latest
PRANTIK_Resume_latestPRANTIK_Resume_latest
PRANTIK_Resume_latest
 
ENG RABEI CV
ENG RABEI CVENG RABEI CV
ENG RABEI CV
 
Sreerag_CV
Sreerag_CVSreerag_CV
Sreerag_CV
 

Similar to RESUME_RAGHUNATH (20)

electrical&inst engineer
electrical&inst engineerelectrical&inst engineer
electrical&inst engineer
 
Resume_Umesh jagtap
Resume_Umesh jagtapResume_Umesh jagtap
Resume_Umesh jagtap
 
Resume-Rajesh_02-08-2016
Resume-Rajesh_02-08-2016Resume-Rajesh_02-08-2016
Resume-Rajesh_02-08-2016
 
C.V._GouriShankar
C.V._GouriShankarC.V._GouriShankar
C.V._GouriShankar
 
Resume Abdul Malik
Resume Abdul MalikResume Abdul Malik
Resume Abdul Malik
 
Brahmanand_Jan_2016
Brahmanand_Jan_2016Brahmanand_Jan_2016
Brahmanand_Jan_2016
 
vinodh
vinodhvinodh
vinodh
 
Matsa
MatsaMatsa
Matsa
 
Siddhartha_Saxena_25_Feb_2016
Siddhartha_Saxena_25_Feb_2016Siddhartha_Saxena_25_Feb_2016
Siddhartha_Saxena_25_Feb_2016
 
viklesh essar
viklesh essarviklesh essar
viklesh essar
 
c&i24.12.1014
c&i24.12.1014c&i24.12.1014
c&i24.12.1014
 
Gp Resume
Gp ResumeGp Resume
Gp Resume
 
Ahmed Gomaa CV
Ahmed Gomaa CVAhmed Gomaa CV
Ahmed Gomaa CV
 
Mukesh_Kumar_(1)
Mukesh_Kumar_(1)Mukesh_Kumar_(1)
Mukesh_Kumar_(1)
 
NISHANK_UPDATED_CV_SI
NISHANK_UPDATED_CV_SINISHANK_UPDATED_CV_SI
NISHANK_UPDATED_CV_SI
 
RESUME
RESUMERESUME
RESUME
 
Resume
ResumeResume
Resume
 
dasu resume 123
dasu resume 123dasu resume 123
dasu resume 123
 
amit CV
amit CVamit CV
amit CV
 
raju kodela (1)
raju kodela (1)raju kodela (1)
raju kodela (1)
 

RESUME_RAGHUNATH

  • 1. RAGHUNATH JANA Vill-Gobindapur, P.O-Gobindapur + Bajitpur, P.S-Sutahata , Dist.-Purba Medinipur, PIN-721645 Telephone: 09083286278(M) Email: raghu.eie@hotmail.com KEY STRENGTHS   Erection & Commissioning & Programming  Preventive Maintenance   SLD,CTD in AutoCAD 2D  Project Assist.  CARRIER SUMMERY InstrumentationEngineer,offering 4.5 yearsof versatile experience inPowerplantOperation- Maintenance & commissioning. Successfullycompletedthe erection& commissioningofall E & I equipmentsfor12 MW CPP Project& the unitis running at 70% PLF ( RASHMI METALIKS Ltd. Kharagpur, Sahachok) Successfullycompletedthe full logicprogramming & commissioning ofall E & I equipmentsfor39TPH WHRB Boiler ( RASHMI CEMENT Ltd. Jhargram, Jitusole) Successfullycompletedthe full logicprogramming & commissioning of all E & I equipmentsfor VRM(Vertical RollingMill) (RASHMICEMENT LTD U-III,JHARGRAM,BORIA) PROFESSIONAL EXPERIENCE Present Organization: Rashmi Cement Ltd. (Power Division) Designation: Sr. Engineer(Power Division) Period: (june,12 to February,14) + (July to till now) Boiler: CVL (6x10 TPH), TSPL (4x10.5 TPH),ISGEC(1X39TPH) Type: Single Drum WHRB Boiler Turbine: 1 x 18 MW Triveni Alternator: TDPS (Toyo Denki Power System) DCS: SIMENS (SIMENTIC PCS 7.0)) Functional Role: Maintenance andShifthandlingand also commissioning work of 12 MW Project at Kharagpur. Bhaskar Steel and Ferro Alloy Ltd. (SRMB Srijan Ltd. ) Raurkela Designation: Asst. Engineer(Power Division) Period: February-14 to June-14 Boiler: Thermax(1x22) and (1x38) Type: AFBC Dual Drum Turbine: 1 x 12 MW Triveni Alternator: BHEL DCS: Yokogawa(CENTUMCS-300) Functional Role: Maintenance and Shift handling CURRENT JOB PROFILE  Calibration of Pressure Gauge & Pressure Switch.  Installation of DI, DO, AI , AO Module in DCS panel & their hardware configuration in ES Station.  Can derive Motor, Drive logic programming & interlocking logic in DCS Engineering station.  Adding any AI,AO & DI,DO signal in DCS & also monitoring those signal in SCADA.  Calibrationof I/PConverter,PositionTransmitter,Control valvepneumatic&electronics positioner.
  • 2.  Troubleshooting of MotorizedControl Valves control systemfault&alsomaintenance work,(Auma, Rotor).  Maintenancesandoperationof control valves,ON-OFFPower cylinder, Regulated Power Cylinder, Control valves (Air to open & Air to close), Solenoid valve, Pressure switch,DP Switch.  Calibration of Thermocouples & RTDs with the help of Thermostat  I/P & O/P Troubleshooting of PLC(ALLEN-BRADELY, SIEMENS) operation .  Calibration of Flow, Temperature, Level Transmitter .  Maintenance & operating of air Compressor’s oil filter, oil separator, MPV valve, check valve, & cooler.  Work in Frequency operator(PF)  Breaker Maintenance & operating.  Installation & setting of MPU & Vibration Sensor in Turbine, Gear box & Alternator.  Calibration & tripping, almring setting of Temperature Scanner.  Handling of HART calibrator & Source Meter.  Solving any fault of Ash Handling System.  Solving any type of interlocking in logic. Drawing & Designing:  Preparation of SLD , P& ID & Cable Schedules ,CTDs, Instrumentation Hook UP Drawing by Auto CAD 2D. TRAINING EXPERIENCE :  Industrial Practical Training at INDIAN OIL CORPORATION LIMITED, HALDIA REFINERY from 01ST OCT,2011 to 31ST OCT SOFTWARE SKILS:  Platforms : Windows  Packages: AutoCAD 2D, MS Office, MS Project, ERP(Light House).  Programming: DCS- Siemens Simatic Manager( PCS 7 ) , YOKOGAWA-CENTIUM-3000, Programming Language-CFC,FBD, LAD. SCADA-Siemens Wincc V7.0 & 7.2, Fix 32 PLC- Schneider Modicon-340(Software-Unity Pro XL, So Machine) Siemens S7-1200(Software- TIA Version 13) ACADAMIA  Diplomaengineering in Electronics & Instrumentation Engineering from Dr. Meghnad Saha Institute Of Technology under W.B.S.C.T.E. Board, Haldia in 2012 and Scored 84.3%  Higher Secondary (10+2) in Science from Mahishadal Raj High School under W.B.C.H.S.E. Board in 2009 and scored 76.4%  Secondary (10) from Rampur Vivekananda Mission Vidyamandir under W.B.B.S.E. Board in 2007 and scored 80.5% PERSONAL PROFILE Father’s Name : Kalipada jana Date of birth : 02/12/1991 Gender : Male Marital Status : Single Language known : English, Hindi, Bengali,Oria Interests :Playing Cricket, Football & Listening Music DECLARATION I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars. Date-31/08/15 Signature