1. Shubham Goswami
Email: shub1289@gmail.com
Mobile: +91-9007074657, +91-9560017307
SUMMARY:
Electrical Engineer with exceptional problem solving and troubleshooting skills seeking a
position in which these skills can be utilized and enhanced for the betterment of the
company.
WORK EXPERIENCE:
 Tenure: October 2014 to present.
Pabsta Engineers India Ltd Kolkata (PEIL)
Working as a Technical Safety Auditor (Electrical)/ Trainer.
Client : IOCL, HPCL, Nationalize Banks, Hospitals & Buildings
Environment : On Site
Testing Approach : Manual and Automated.
Tools Used : Insulation Tester (Megger), Earth tester, Clamp & Lux Meter
Description:
For safety audit of our different clients, we use to inspect all electrical equipment used by
them, as per the checklist. We also advise to replace, wherever it is required, as per
electrical standards of IE, CEA (Central Electricity Authority) & OISD (Oil Industry Safety
Directorate). Generally, we train the staff concerned regarding safety procedures of
different fields & devices. I have been utilized as a third party inspector for all the
automation system being installed right from beginning to end at clients location to
assure healthy working of equipments and data program. I even work on GAP analysis
of terminal depots of oil sectors for proper working and safety of the plant and, the
people working and residing in an around as per OISD. I prepare reports on QRA,
HAZOP i.e Hazard analysis and ERDMP by using DNV (Det Norske Veritas) software.
Under this we use to collect field data from sites and collectively put it into the software,
to find out the exact result for the safe working of the plants, terminals and depots.
Responsibilities:
 ESA (Electrical Safety Audit).
 Provide safety training to company employees.
 TPI (Third party Inspections) of RVI (Retail Visual Identity) of Signage.
 FAT (Factory Acceptance Test) of Automation.
 QRA (Quantitative Risk Assessment).
 HAZOP (Hazard and Operability Study).
 ERDMP (Emergency Response & Disaster Management Planning).
 GAP ANALYSIS of Terminal Depots of OIL Sectors as per OISD (Oil Industry Safety
Directorate).
Photograph

2.  Tenure: July 2013 to September 2014.
J P Power Pvt. Ltd Bangalore.
Role : Junior Electrical Engineer
I joined as a Trainee Engineer. I bear responsible for design, testing & validation of
transmission, distribution and sub-station line products. Also I have been involved in
marketing of all overhead line products. Design, Testing & Validation includes AC
circuits and sequence circuits of power networks, Overhead transmission line
parameters, Modeling of transmission lines, AC power-flow analysis using iterative
methods, Symmetrical and unsymmetrical faults, Control of voltage and power flow,
Stability in AC networks, High-voltage direct current (HVDC) transmission, Corona
and electric field effects of transmission lines, Lightning performance of transmission
lines, Coordination of transmission line insulation, Insulation test.
TECHNICAL EXPERIENCE:
 Obtained Post Graduate Diploma in Industrial Automation (PGDIA) from Technocrat
Automation Pvt Limited (IAO Accredited), Chennai. With 11 months hands on
practical experience in Industrial Automation Tools specializing in PLC, DCS,
SCADA and VFD.
TECHNICAL SKILLS:
 PLC(Programmable Logic Controllers) &DCS(Distributed Control System) -
Programming languages such as LD(Ladder Diagram) &FBD (Functional Block
Diagram)
 Hands on Practical exposure in brands as Siemens, AB(Allen Bradley), ABB(Asea
Brown Boveri), Honeywell, Rockwell, Schneider, GE-Fanuc, Keyence, Omron,
Messung, Mitsubishi, and Delta
 SCADA (Supervisory Control & Data Acquisition) – Screen designing, PC & PLC
interface, Data collection & storage
 HMI (Human Machine Interface) - Screen designing, PLC interface, DCS interface
 PAC (Programmable Automation Controller) – X, Y axis Robotic Control using Servo
motors & drives
 VFD (Variable Frequency Drive) – Commissioning and Troubleshooting
 Pneumatics & Field Instruments ( Control Valve, Sensors, Level Transmitters,
Flow Transmitters, Temperature Transmitters, Pressure Switches)
 Interfacing between PLC & GSM modem to communicate with mobile device
 Knowledge in Panel wiring
 Knowledge in PID(Proportional Integral Derivative)

3.  Troubleshooting - PLC & DCS programming
Control Panel (Power wiring & Control wiring)
EDUCATIONAL QUALIFICATIONS:
Qualification University/Board Month-Year Percentage
B.E (Electrical) Pune University June 2011 65.0%
H.S.C ICSE June 2006 67.0 %
S.S.C ICSE March 2004 68.0%
ACHIEVEMENTS
Have obtained National Cadet Corps (NCC) ‘A’ Certificate in the year 2002.
Computer Skills
1 Basic of C Language.
2 Knowledge of PLC, SCADA, Mat lab.
3 Knowledge of all editions of windows & MS Office.
INPLANT TRAINING / INDUSTRIAL VISIT:
Organization: 1. NTPC UTTAR PRADESH, 12-06-2009 to 11-07-2009
2. NCL. 23-06-2009 to 07-07-2009
3. TATA POWER, 08-01-2011 to 27-01-2011
Training Duration : 30 days
Vocational Training : Indo Danish Tool Room, Jamshedpur
Subject : PLC & SCADA with project
Duration : 04-01-2011 to 03-02-2011 (30 days)
PERSONAL PROFILE:
Father’s Name : Mr. Satyendra Prasad Goswami
Date of Birth : 12-02-1989
Gender : Male
Passport Number & Validity : K8239902 Valid upto 25/12/2022
Language Known : English, Hindi
Hobbies : Playing Volley Ball, Exploring new things.
Address : Qtr no 51 AB Rangatand Railway Colony station
Dhanbad Jharkhand. Pin-826001.
DECLARATION:
I hereby declare that the above particulars furnished by me are true to the best of my
knowledge and belief.
Date & Place: Kolkata