1. PRATIP KUMAR DUTTA
Mobile no – 9007105058 /9831284688
Passport No. - G7201507
E mail ID : - pratip_dutta@rediffmail.com
___________________________________________________________________________________________
CAREER SUMMARY:
• Working as Senior Executive Engineer in Steel plantech India pvt Ltd (MNC) in Engineering department.
• Design & detail engineering of Coil processing equipments in Annealing & coating line (ACL).
• Preparation of 3D part & assembly models in Autodesk Inventor & Solid edge.
• Project exp.-Coil processing equipment, material handling equipment of Steel plant, Power plant etc.
• Supervising Maintenance job of Terminal equipment of processing line in Shut down period at site.
• Functional area- Preparation & checking of Mechanical assembly, detail drawing & design calculation
following the standards like IS & ISO. Experience in Erection & Commissioning of equipment’s of ACL.
ACADEMIC & TECHNICAL QUALIFICATION:-
• Passed Secondary exam in 1995 from W.B.B.S.E with 1st division (72%).
• Passed Higher Secondary in 1997 from W.B.C.H.S.E with 1st division (60.3%)
• Passed Diploma in Mechanical Engineering in 2001 W.B.C.T.E with 1st division (77.3%) [Distinction]
• Pursuing AMIE in Mechanical Engineering, Section- B.
WORK EXPERIENCE:-
1. Organization : Steel Plantech Engg. India pvt Ltd.
(a division of J.P.Steelplantech, Japan).
Location : Based on Kolkata, CSCI site Dahej, Gujrat.
Projects : i) Annealing & coating line of CSCI (China steel corporation), Gujrat.
ii) Jazz, JSW Bellary, Karnataka.
Period : May, 2013 to till Date
Position : i) Senior Executive Engineer (from April, 2015 to till date)
ii) Executive Engineer (from joining to March, 2015)
Department : Engineering, downstream.
JOB PROFILE:
• Preparation of arrangement & detail drawing of few equipments like Pay off reel, Entry & Del. Shear
Bridle roll, Deflector roll, Steering roll etc of Annealing & coating line.
• Preparation of several on board machine piping drawing for many types of equipment like Pay off reel,
coil opener, Entry & Delivery looper. Belt wrapper, Tension Reel, Entry & del. Shear Etc.
• Checking drawing & tech. parameters for approval of bought items like Gear box, Chain sprocket, Gear
coupling, Rubber coupling, Worm jack, hyd. & pneumatic Cylinders, Valves, Flow indicator etc.
• Preparation of Bought Specification of Coupling, Gear box, Pneumatic & Hydraulic cylinder etc.
• Conversion of JIS (Japanese standard) to IS or ISO to select material & standard items of m/c parts.
• Preparation of 3D part models of the components. Making sub assembly models of the equipment in 3D
software named Autodesk Inventor 2013.
• Preparation of 2D drawings (.idw) from 3D models (.ipt & .iam) prepared in Inventor 2013.
• Worked at site as design engineer to support Erection & Commissioning of Annealing & coating line at
CSCI site. Involve in resolving technical problems of Terminal equipment at staying at site.
• Executing maintenance work of Terminal Equipment during Shut down period.
• Experience in commissioning of Side trimmer, Scrap baller, Burr Masher etc equipment at CSCI site.
SOFTWARE USED - Autocad 2010 to 2013, Autodesk Inventor 2013.
1 of 3

2. 2. Organization : TRF Limited (A TATA Enterprise)
Location : Kolkata
Period : June, 2010 to April, 2013
Position : i) Assistant Manager (from August, 2012 to April, 2013)
ii) Senior Engineer (from joining to July, 2012)
Department : Engineering, Port & Yard Equipment Division, Kolkata
JOB PROFILE:
• Preparation of general arrangement (machine G.A.) drawing & Technical characteristic of Stacker cum
reclaimer (with Tripper or with Intermediate conveyor) & some other machines like Slewing stacker,
Bucket wheel reclaimer, Twin boom stacker.
• Coordinating with Engg. Consultant regarding Technical characteristic & GA for approval.
• Preparation of Bought out specification (BOS) preparation & modifications.
• Coordination with clients regarding some power calculations, wheel load calculations etc
• Checking & approving bought out items like Gear box, gear & fluid Coupling, Brakes, auto Rail clamp
etc. Coordination with vendors regarding technical parameters of those items.
• Preparation of several drive assly like Long Travel drive, Boom conveyor drive, Slew drive, intermediate
conveyor drive, Bucket wheel drive etc & detail engineering.
• Preparation of several Mechanical arrangement drg like L.T arrangement, boom conveyor arrgt.
Intermediate conveyor arrgt., Tripper conv. arrangement etc & detail engineering.
• Preparing conveyor layouts positioning different idlers, discharge chutes, limit switches etc.
• Preparation of bill of material (BOM) of arrangements and uploading them to SAP server.
• Resolving problems of equipment from design aspect at erection of Stacker reclaimer at site of Tata
Steel, Jamshedpur (3000 TPA plant).
• Was recognized & rewarded by company for a CFT (Cross Functional Team) project. It was ‘reduction
of BOM preparation time & calculation of correction factor for SAP BOM’.
• Calculation related work:-
o Checking Bending moment of upper part (discharge end), draw bar frame of Tripper structure of
Tata steel, Kalinganagar project.
o Calculation of Pin size check between upper part & lower part of Tripper.
o Calculation of the trajectory of material discharge from Tripper & Boom using CEMA & IS 11592.
o Calculation of depth of material on belt conveyor (on idler of diff. trough angle) using CEMA & IS.
o Checked Buckling of Tripper upper structure.
o Weld design check in different joints for bending & shear.
• Projects :-
i) BSP (Bhilai steel plant), client-Mecon - Twin boom stacker & Stacker cum reclaimer.
ii) Tata Steel (300 TPA), client-M.N.Dastur :- Stacker cum reclaimer with Tripper
iii) NTPC- Bar, Mouda & Vallur :- Stacker reclaimer, Bucket wheel recl. & Slewing stacker.
iv) Rajasthan rajya vidyut utpadan nigam ltd, Client-Indure pvt ltd:- Stacker cum reclaimer w/
Intermediate conveyor (1000 TPH).
v) Tata Steel, Kalinganagar.- Stacker cum reclaimer
SOFTWARE USED - Autocad 2010, Solid Edge ST, SAP ECC 6.0
3. Organization : STEEL PLUS LTD (a div. of CANAM group, USA & Canada)
Location : Kolkata
Period : February, 2004 to May, 2010.
Position : i) Team Leader (from February, 2007 to May, 2010 )
ii) Detailer (from joining to January, 2007)
JOB PROFILE
Worked as a Team Leader of a team of almost 10 ‘Detailers’ by giving engineering supports, coordination with
overseas clients was a part of job.
2 of 3

3. Scope of work was as follows:-
• Detailing & checking of Erection & Fabrication drawing Joist, Girder, Beam. Preparing connection
details like Top/ Face connection, shear & moment connection to wall, W-beam, Column etc.
Determining Bridging or bracing maintaining AISC & SJI standards. Preparing Fab ‘List’ or BOM of
joist and other products for fabrication.
• Detailing (in AutoCAD) of Steel Truss with BOM of every member like top & bottom chord, web
members, gusset plate etc. Calculating the welds as per axial load given.
• Calculation of Loads on Joist & Girder from different RTU, AHU, HVAC units also in some cases from
Snow Drift if required per contract design drawing.
• Some of projects done :
i) GAMBRILLS ELEMENTARY SCHOOL, Lancaster, PA
ii) ST. AGNES CATHOLIC CHURCH. Shepherdstown, WV
iii) SEAGIS WAREHOUSE SILVER, Silver Spring, PA
iv) LOUDOUN COUNTRY DAY SCHOOL, Leesburg, VA
v) NATIONAL AIR & SPACE MUSEUM, Chantilly, VA
SOFTWARE USED - Autocad 2010, Joist Modeler.
OVERSEAS TOUR:-
Visited to Frederick of Maryland State of North America from Steel Plus Ltd in November,2008 for the
purpose of Training & coordination with clients. Visited the plant of ‘Canam’ in point of rocks. Observed &
learnt about fabrication of joist, Girder etc. Visited two jobsites in Virginia (VA). It was nice to observe the
Erection process of joist, girder, bridging, beam etc in those project in US.
4. Organization : ISHAAN TECHNOLOGY Pvt. Ltd (a sister concern of HSL) &
HINDUSTHAN SEALS LTD [a company of ‘MANAKSIA’ group]
Location : Kolkata/ Howrah
Period : August, 2003 to January, 2004 (Ishaan Technology pvt. Ltd)
September, 2001 to July, 2003 (Hindusthan Seals Ltd)
Position : Design assistant
Department : Design & Manufacturing
JOB PROFILE
• Preparation of GA, Assembly & detail drawings of equipment like Pinch roller, Coiler, Decoiler,
vertical Looper etc.for different Coil processing lines like CGL (continuous galvanizing line of sheet
metal), CTL (cut to length), CCL (colour coating line) etc.
• Preparation of GA drawing of total assembled equipments as well as Layout drawing of Total
processing Line with all equipment.
PERSONAL PROFILE:-
Address :- Neel Apartment, Flat no-9,
3rd
floor, P103 Maharani Indira Devi road,
Behala, Kolkata- 700060
Date of birth :- 28th April, 1978
Fathers Name :- Sri Nemai Chand Dutta
Nationality :- Indian
Marital Status :- Married
Fluency :- English, Bengali and Hindi
Strength :- Hard-working, Sincerity, Positive attitude, Confidence
COMPUTER SKILL :-
Microsoft Windows, Internet,
MS word, MS Excel, MS PowerPoint,
2D software : AutoCAD, Autocad Mechanical, Joist Modeler, Cadian
3D software : Autocad 3D, SOLID EDGE ST (Basic)
Autodesk Inventor 2013.
PLACE: - Kolkata
DATE : ____________________
Signature
3 of 3