1. Mobile: +91-9164000884: pradeepsapalya28@gmail.com 1
Pradeep Kumar
Mobile: +91-9164000884
e-mail:pradeepsapalya28@gmail.com
Current Location : Mangalore, India
Current Career Level : Sr.Lab Officer
Salary Requirements : Negotiable
Years of relevant work experience : 3Year
Education : Diploma in Polymer Technology
Work Requirements : Full-Time Employee
CAREER OBJECTIVE
A position as an Technical Officer to push my career within a dynamic and leading
organization to make progress with my performance, effectiveness, and competency also
growing with the growth of organization.
PROFESSIONAL SUMMARY
I have One year work experience at “APOLLO TYRES LTD, LIMDA GUJARATH” as
technical shift in-charge in building , curing & uniformity area
Currently working as Sr.Lab Officer, in Konkan Specialty Poly-products PVT.LTD,
Mangalore.
It’s a master batch manufacturing company.NABL accredited SSG (Scientific
Service Group): A third party Analysis laboratory.

2. Mobile: +91-9164000884: pradeepsapalya28@gmail.com 2
HANDLED / INVOLVE (at Apollo tyres)
 Trouble shooting & quality controlling in building curing & uniformity area
 Machine auditing in building & curing
 Machine specification set verification & Machine tollerence checking in building &
curing
 Uniformity machine calibration
 Tyre cut section analysis & waveform analysis of uniformity drop sizes
 Defect controlling & quality controlling
 Uniformity drop sizes following & trials for uniformity improvement
 Waveform Analysis
HANDLED / INVOLVE (AT KONKAN- NABL CERTIFIED LAB)
 Filter pressure value ( std E -13900)
 UNIVERSEL TESTING MACHINE(Tensile strength-ASTM D638,ISO
527,ASTMD882,Woven sack IS1969, Compression test ASTM D695, Flexural strength-
ASTM D790&ISO 178)
 Heat deflection temperature(ASTM D648,ISO75) & Vicat softening temperature (ASTM
D1525/ ISO 306)
 Melt flow rate (ASTM D1238/ISO 1133)
 Impact test both IZOD Edgewise(ASTM D256, ASTM D4812, ISO 180(Notched & Un
Notched), & CHARPY Edgewise ISO 179(Notched & Un Notched),
 Notching for impact test both IZOD& CHARPY
 Limiting Oxygen Index test (ASTM D2863)
 FTIR (Fourier Transform InfraredSpectroscopy (ASTM E 1252)
 Weathering test QUV & Q SUN
 Basics of -TGA (Thermo Gravimetric Analysis), DSC (Differential Scanning
Calorimetric.

3. Mobile: +91-9164000884: pradeepsapalya28@gmail.com 3
PROFESSIONAL SKILLS
 Testing of mechanical properties of materials like Tensile Strength, flexural strength,
compression strength by using universal testing machine. And impact strength by
using impact tester for quantitative analysis and for the Material selection
 Measure of the ease of flow of the melt of a thermoplastic polymer or co polymers by
help of MFR Machine to study the Rheological Property of Materials
 Measure of filter pressure value by using FPV machine for qualitative analysis of color
Master Batches
 Study of thermal behavior of material with the help HDT/VSP tester.
 Utilization of FTIR for the Material identification and characterization. Basic
identification of polymers processing additives and pigments, coatings, films, power
oils, elastomers, composites and thermo sets.
 Utilization of FTIR spectra-scopy in identification of the unknown materials, purity
analysis.
 Analysis of filler content ,ash content ,moisture content , using thermo gravimetric
analyzer
 Identification of polymer melting point, glass transission temperature and oxidative
induction time of polymers, copolymers &other raw materials using Differential
Scanning calorimetry.
 Conducting of flammability test and limiting oxygen index test for the analysis of
flammability behavior of the materials.
 Utilization of Q-UV and Q-Xenon Weathering chambers to find the Polymer
degradation is a change in the properties like tensile strength, color, shape, etc. of
a polymer or polymer-based product under the influence of one or more
environmental factors such as heat, light and acids
 Frequent checks on calibration & preventive maintenance of every instruments and
troubleshooting problems and performing periodic maintenance of instruments
 Involved in the development of UV master Bacthes antistatic agent master Bacthes,
anti-blocking master Bacthes, slip additive master Bacthes, bio degradable films and
Wood Polymer Composite Materials
 Involved in documentation of ISO audit for the lab accreditation.

4. Mobile: +91-9164000884: pradeepsapalya28@gmail.com 4
PERSONAL SKILLS
 Deep Observational in trouble shooting
 Innovative and Research Oriented
 Interdepartmental Coordination
 Ability to learn a verity of new test and equipments New product Research, Testing,
and implementation.
 Key strengths include systematic thinking, problem-solving capability, and ability to
learn new technologies quickly and can easily adapt to new environments.
 well working experience in M.S office and M.S word
PROFESSIONAL EXPERIENCE
Organization Designation Duration
Apollo tyres ltd, limda gujarath Team Member
Trainee(Technical)
July 2013- July 2014
Konkan Spciality Polyproducts
PVT.LTD
Sr.Lab Officer Aug 2014-Till Date
ACADEMIC QUALIFICATIONS
QUALIFICATION INSTITUTION YEAR OF
PASSING
SEMISTER PERCENTAGE
SSLC S.V.S HIGH SCHOOL
BANTWAL
2006-2007 ___ 60.32
PUC S.V.S HIGH COLLEGE
BANTWAL
2007-2009 ___ 50.16
DIPLOMA IN
POLYMER
TECHNOLOGY
KARNATAKA(GOVT)
POLYTECHNIC
MANGALORE
2010-2011 1ST SEM 62.4
2ND SEM 58.97
2011-2012 3RD SEM 58.11
4TH SEM 56.11
2012-2013 5TH SEM 64.44
6TH SEM 60.26

5. Mobile: +91-9164000884: pradeepsapalya28@gmail.com 5
TRAININGS ATTENDED
 Yellow Belt Training.
 Fire &Safety Training
 First Aid Training
HOBBIES
 Playing
 Watching News
 Cooking
 LISTENING SONGS
PERSONAL DETAILS
 Name : Pradeep Kumar
 Sex : Male
 Marital status : Single
 Date of Birth : 28 May 1992
 Languages known : English, Hindi, KannadaTulu and Tamil
Declaration
I hereby declare that the details stated above are authentic to the best of my knowledge and
belief.
Place: Mangalore
Date: [Pradeep]