Peter Uko Etim is a Nigerian piping designer with over 14 years of experience in the oil and gas industry. He has worked on numerous projects for companies like Shell, Mobil, Chevron, and Total. He is proficient in 3D modeling software like PDMS and has experience producing piping drawings, equipment layouts, and material take-offs. He holds qualifications in mechanical engineering technology.

1. NAME: ETIM, PETER UKO.
DATE OF BIRTH: 11th
November, 1971
STATE OF ORIGIN: Akwa Ibom State
NATIONALITY: Nigerian
SEX: Male
MARITAL STATUS: Married
ADDRESS: 34 Owolewa Street,
Off Orile Road,
By National Bus stop,
Agege Local Government Area,
Lagos State.
Nigeria
TELEPHONE: 234-80554-48085, 2347-0343-84096
OFFICE 234-(0)1-4618508, 7221981 Ext. 2551
Email ADDRESS: petim2006@yahoo.com
Peter.Etim@deltaafrik.com
AVAILABILITY PERIOD: One month
CURRENT LOCATION: Lagos -Nigeria
INSTITUTION ATTENDED
Federal University of Technology ,
Akure –Ondo State
QUALIFICATION
PGD(Mechanical
Engineering Technology)
PERIOD
2007-2010
The Polytechnic of Calabar
P.M.B 111O,
Cross River State
HND.(Mechanical
Engineering Technology)
1995-2000
Ukpum Okon Comprehensive Secondary School
Ikot Abasi Local Govt.Area,
Akwa Ibom State
SSCE 1987-1993
Primary School ,
Ikot Abia,
Mkpat Enin Local Govt. Area
Akwa Ibom State
FSLC 1978-1984
National Engineering And Technical Company Ltd,
(Subsidiary of NNPC),146 B Ligali Ayorinde Street ,
Victoria Island, Lagos
NYSC 2002
PROFESSIONAL CERTIFICATE COREN R.00629ET

2. Supervising Piping Designer:
Fourteen years of experience in the oil and gas industries ,specifically in the design sector including
Seven years with DeltaAfrik Engineering Limited .The design experience include PDMS modelling
of Equipment, Piping, Auto generation of Piping Isometrics , MTO’s ,detection and modification of
clashes between piping ,equipment and structural members, modelling of support using 3D PDMS
software .Design experience also include extraction of 2D draft drawings from PDMS, Piping
Equipment Layout drawings, Piping General Arrangement drawings, Elevations drawings and Iso
draft drawings. Drafting experience in design includes the use of Auto cad in drafting, also the use of
Excel spread sheet in the preparation of Preliminary and Bulk MTO’s.
2008 - Present Supervising Piping Designer, Delta Afrik Engineering, Lagos/Worley Parsons
Experiences on Projects
1. ASSA NORTH-OHAJI SOUTH PROJECT.
Feed-Project
Client: Shell Petroleum Development Company of Nigeria Ltd.
(Oct.2015-Till date)
• PDMS Design of 3D Piping and Equipment
• Production of Draft Equipment Layout Drawings from PDMS.
• Production of Draft Piping General Arrangement Drawing and Piping Elevation
Drawings from PDMS.
2. SATELLITE FIELDS DEVELOPMENT PROJECT PHASE 2
Detail Engineering Design-Project
CLIENT: Mobil Producing Nigeria, Ultd.(Construction team)
(March. 2015 –Sept.2015)
Parts of my responsibilities are:
• PDMS Design of 3D Piping and Equipment
• Production of Piping Isometrics drawing using Iso draft
• Production of Draft Equipment Layout Drawings from PDMS.
• Production of Draft Piping General Arrangement Drawing and Piping Elevation
Drawings from PDMS.
• Modelling of support using PDMS.
• The use of clash manager to generate clash report.
Clashes detection between Structures, Pipes, Equipment’s

3. Experiences on Projects
3. ASSA NORTH-OHAJI SOUTH PROJECT.
Pre-Feed-Project
Client: Shell Petroleum Development Company of Nigeria Ltd.
(Oct.2014-December2014)
• Production of General Plot Plan
• Production of Piping Equipment Layout.
4. SATELLITE FIELDS DEVELOPMENT PROJECT PHASE 2
Detail Engineering Design-Project
CLIENT: Mobil Producing Nigeria, Ultd.(Construction team)
(Jan. 2014 –Sept.2014)
• Constructability review using PDMS.
• Generation and review of Piping MTOs.
• In cooperate comment as the case may be.
• Running of clash managers’ report and resolving of clashes.
5. MULTIPHASE FLOW METER INSTALLATION PROJECT
Detail Engineering Design-Project
CLIENT: SEPLAT NIG.LTD.(October. 2013-December 2013)
Responsibilities
 Production of Piping General Arrangement drawings
6. FUNIWA ONSHORE GAS PROJECT
Pre-Feed-Project
CLIENT: CHEVRON NIG.LTD.(June 2013-October,2013)
Responsibilities
 Production of Equipment layout drawings
 Production of Plot Plan

4. 7. SATELLITE FIELDS DEVELOPMENT PROJECT PHASE 2
Detail Engineering Design-Project
CLIENT: Mobil Producing Nigeria, Ultd.(June 2011 –May 2013)
Parts of my responsibilities are:
• PDMS Design of 3D Piping and Equipment
• Production of Piping Isometrics drawing using Iso draft
• Production of Draft Equipment Layout Drawings from PDMS.
• Production of Draft Piping General Arrangement Drawing and Piping Elevation
Drawings from PDMS.
• Modelling of support using PDMS.
• The use of clash manager to generate clash report.
• Clashes detection between Structures, Pipes, Equipment’s and cable trays .
• The use of the clash report to correct clashes in the models.
• Extensive site visit survey with DA multidiscipline team to identify Tie-ins
locations
In four of the Mobil platform; Idoho BP, Ubit GW, Ubit GY and Yoho YP Platform.
5. IKIKE FIELD DEVELOPMENT PROJECT
Detail Engineering Design-Project
OML-99 TOTAL - AMP1 & AMP2 Platform
Client: Total Nigeria Ltd, (August 2010 –April 2011)
Parts of my responsibilities are:
• PDMS Design of 3D Piping and Equipment model using Project P&ID drawings.
• Production of Draft Equipment Layout Drawings from PDMS.
• Production of Draft Piping General Arrangement Drawings, Piping Elevation Drawings and Iso
draft from PDMS.
• Extensive site survey with DA multidiscipline team to identify Tie-ins locations
Off shore Amenam Okpono –AMP1, AMD1, AMD2 & AMD3 Platform
6. OML 99[Amenam / Kpono] Oily Water Treatment upgrade-PH.1
Detail Engineering Design-Project

5. Client: Total E&P Nigeria ltd, (August 2009 – April 2010)
Responsibilities:
• PDMS Design of 3D Piping and Equipment model using Project P&ID drawings.
• Production of Draft Equipment Layout Drawings from PDMS.
• Production of Draft Piping General Arrangement Drawing and Piping Elevation Drawings from
PDMS.
• Production of Piping Isometrics drawing using Iso draft
• Extensive site survey with DA multidiscipline team to identify Tie-ins locations.
• Attending Model review and implementing comment
7. MIPS. EI-Concept Re-evaluation Study
Client: Mobil Producing Nigeria ltd, (March 2009 – June 2009)
• Production of Draft Equipment Layout Drawings from PDMS
• The Production of Piping Equipment General Arrangement Drawings.
• The production Long lead and bulk Piping Material Take off (MTOs) for Etim LP Platform
• The production of the Idoho North Satellite Pig traps option and the converting of the Idoho
Production platform to a Riser Platform.
• Also work in Pipeline Replacement project, drafting and implementing of client comment
8. MIPs. EIU Field Re-development Project
Client: Mobil Producing Nigeria ltd, (July 2008 – February 2009)
• PDMS Design of 3D Pipes and Equipment .
• Production of Draft Equipment Layout Drawings from PDMS
• The extraction of drafts Piping General Arrangement Drawings
• The extraction of draft Piping and Equipment Elevations Drawings for Utue KR and Etim LP
Platform.
2002 - 2008 Piping Engineer, NETCO(Subsidiary of NNPC) Lagos
Detail Engineering Design-Project
9. NLNG Condensate Stabilization unit Train 6 Project
Client: NLNG-Bonny, Nigeria
Responsibilities:
• Modelling of Equipment and Pipes with the 3D PDMS Software.
• Extraction of draft Piping and Equipment Elevations Drawings.

6. • The Extraction of draft Piping General Arrangement Drawings.
• The extraction of draft Piping Isometrics Drawings from PDMS model.
• The reviewing and updating of Vendor and Client comments
10. NAOC-NLNG GAS Supply Train 6 Project
Detail Engineering Design-Project
Client: Agip-Nigeria
Responsibilities:
• The Production of unit Plot Plan
• Production of As-Built Piping General Arrangement Drawings.
• Preparation of Long lead and Bulk Piping Material Take off (MTOs).
11. Mobil ERHA FPSO Project
Detail Engineering Design-Project
Client: Mobil Producing Nig.Ltd.
Responsibilities:
• PDMS Design of 3D Equipment and Pipes.
• Extraction of 2D drafts Piping and Equipment Arrangement Drawings
• Extraction of draft Piping and Equipment Elevations Drawings.
• Extraction of 2D Draft of Piping General Arrangement Drawings
• Extraction of 2D Piping Isometrics Drawings from PDMS model.
• The reviewing and updating of Vendor and Client comments
12. Chevron EGP 3A Escravos Gas Plant Project.
Client: Chevron Nig.Ltd.
Detail Engineering Design-Project
Responsibilities:
• Generation of 2D Piping Isometrics Auto Plant.
• Generation of Piping Material Take off from Auto Plant.
• Drafting of Pipe support drawings using Auto CAD software.

7. EDUCATION
PGD, Federal University Technology Akure, 2010
HND, The Polytechnic of Calabar, Cross River State, Nigeria, 2000
REGISTRATIONS/AFFILIATIONS
COREN – R.00629ET
SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES
• AutoCAD Training
• Basic Piping Training
• PDMS Training Course
• Support Training
• ISO 9001-2000 Awareness Training (Quality Management System)
• ISO 14001 Awareness Training (Environmental Management Systems)
• In-house Training on General Corrosion Engineering
• In-house Helicopter Underwater Escape Training(HUET)

8. Referees:
1. Engr.Amusa Olalere,
Deltaafrik Engr.Ltd.
Bay Atlantic Tower,
No. 4 Freedom Road,
3rd Round about Lekki Expressway
Ikate Lekki Phase 1.
Lagos.
Phone no: 2348-03334-2973.
2. Engr. Satish Musale,
Deltaafrik Engr.Ltd.
Bay Atlantic Tower,
No. 4 Freedom Road,
3rd Round about Lekki Expressway
Ikate Lekki Phase 1.
Lagos.
Phone no: 2348-07478-9449