1. CURRICULUM VITAE
CHETAN BALIRAM PATIL
301, Moreshwer Apartment, Sector-13, Kharghar, Navi Mumbai-410210, Maharashtra, India
Mo:-+919769108410
chetan.b.patil01@gmail.com
chetan063@gmail.com
DISCIPLINE: PIPING DESIGNER (PDS/PDMS)
I aim to become an integral member of the growing organization and to be a part of the
organizational pillar. I with my dedication and hard work would like to see that my services are
always “needed”.
• Have 11.4 yrs. of experience in Piping
• From Aug2015 to till date in Black & Veatch Pvt. Ltd. (As PDS Designer).
• From Sep2014 to Aug 2015 in Jacobs Engineering India Pvt. Ltd. (As PDS Designer).
• From Dec 2013 to Aug 2014 in Reliance (As a Piping Designer).
• From Sep 2013 to Dec 2013 in Foster Wheeler Asia pacific Pte. Ltd., Singapore (As PDS
Designer.)
• From Jan 2012 to Aug 2013 in Jacobs Engineering India Pvt. Ltd. (As PDS Designer.)
• From Jan 2011 to Jan2012 in Aker Power Gas Ltd. (As PDS Designer.)
• From Jun 2010 to Jan 2011 in Toyo Engg. India Ltd. (As PDS Designer.)
• From Jun 2009 to May 2010 in L&T IES (Baroda). (As a PDS Designer).
• From Feb 2009 to Jun 2009 in Chemtex Global Engineers Pvt. Ltd (As a PDS Designer).
• From Feb 2006 to Feb 2009 in Bec-Rel Engg pvt ltd. (As a PDS Designer.)
• In BECREL 3 months site experience at Jamnagar.
• From Jan 2005 to Feb 2006 with Gharda Chemical Pvt. Ltd. (As a Piping Drafting).
• Preparation of Interconnection Diagram.
• Study piping and Piping layout from P&IDs.
• Piping and Equipment modeling of the plant in PDS Ver. – 7.3 & PDS Ver. – 8.0.
• Checking SER & clear it.
• Primary and secondary support selection along with civil pipe supports for non-critical lines, and
logical supporting for critical lines for input to stress.
• Once stress analysis is over and load summery sheet is available selecting and putting supports
from Bechtel support standard.
• Extracting, checking and issuing Isometrics for construction.
• Reviewing and commenting on vendor data.
• Inter departmental checking with civil, instrumentation, process, electrical etc.
• Reviewing using Smart Plant Review.
Having Exposed to Maximum time on Modeling with the help of PDS software. Can work
independently on PDS Modules & Smart Plant Review (SPR).
Objective:
Experience Summary:
Responsibilities during the above Assignments:
Computer Proficient-:

2. • S.S.C From Pune Board with an aggregate of 50.0% in March 1998.
• H.S.C from Mumbai Board with an aggregate of 50.0% in Feb 2000..
• BCOM from Mumbai University in Feb 2005.
• Diploma in MECHANICAL DRAUGHTSMAN at GUPTE INSTITUTE.
• PDS Version- 8.0
• Pelican Forge Support Modeler
• Micro station.
• Smart Plant Review
• Nevis work Freedom
• Auto-CAD.
• Well conversant with MS-OFFICE.
1. Designation: PDS Piping Designer
Client: Black & Veatch Pvt. Ltd.
Project: Golar Hill Flng
Period: From Aug 2015 to till Date
Responsibilities:-
• Reviewed P&ID for RTF P Track area
• Study Plot Plan, Designing Piping & Equipment Layout using PDS 3D Model.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
2. Designation: PDS Piping Designer
Client: Jacobs Engineering India Pvt. Ltd
Project: Reliance Jamnagar 3 (J3 MEG Plant)
Period: From Jan 2014 to Aug 2015
Responsibilities:-
• Study Plot Plan, Designing Piping Layout using PDS 3D Model.
• Designing Pump Piping
• Reviewed piping layout & giving Physical support in a Column area by using Pelican Support Modeler.
• Self-checking Isometric drawings.
Project: Flint Hills Resources (Phase 4), Houston
Period: From Sep 2014 to Dec 2014
Responsibilities:-
• Study Plot Plan, Designing Piping Layout using PDS 3D Model.
• Designing Tank Firm Piping.
• Designing Skimmer Piping.
• Designing Rack Piping
• Designing PSV station Piping.
• Designing Pump Skid Piping
Project Details:
Computer Skills:
Educational Qualification:
Technical Qualification:

3. • Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self-checking Isometric drawings.
3. Designation: PDS Piping Designer
Client: Reliance India Pvt Ltd. (JV –Reliance and Bechtel)
Project: Jamnagar Export Refinery Project 3. (J3).
Period: From Dec 2013 to Aug 2014.
Responsibilities:-
• Reviewed P&ID for RTF P Track area
• Prepared Line list for the Pipe Track area based on available P&ID’s.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
4. Designation: PDS Piping Designer
Client: Foster Wheeler Asia pacific Pte. Ltd., Singapore.
Project: Lanxess
Period: From Sep2013 to Dec 2013.
Responsibilities:-
• Presently working in a Compress area
• Study Plot Plan, Designing Piping Layout using PDS 3D Model
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
• Self-checking Isometric drawings (ISOGEN).
5. Designation: PDS Piping Designer
Client: Jacobs Engineering India Pvt. Ltd
Project: Horizon Utility & Off Site (Phase 2&3), Canada.
Period: From Jan 2012 to Aug 2013.
Responsibilities:-
• Presently working in a COGEN area
• Designing Gas Heating & Scrubbing Piping
• Study Plot Plan, Designing Piping Layout using PDS 3D Model
• Designing Turbine Piping.
• Designing Rack Piping
• Designing Cooling Water Skid Piping
• Designing Wash Water Skid Piping
• Designing Fire Protection Skid Piping
• Designing Heat Exchanger Piping
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self-checking Isometric drawings.
6. Designation: PDS Piping Designer
Client: AKAR POWER GAS LTD.
Project: Paradip Refinery Plant, India.
Period: From Jan 2011 to Jan 2012.
Responsibilities:-
• Designing pump piping
• Modeling Air cooler small bore piping
• Modeling Air cooler fir line piping.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area .
• Self checking Isometric drawings (ISOGEN). -
7. Designation: PDS Piping Designer
Client: TOYO Engg. India Ltd
Project: HTP Plant, India.
Period: From Jun 2010 to Jan 2011.
Responsibilities:-

4. • Reviewed piping layout & giving Logical & Physical support in a pipe rack area .
• Self checking Isometric drawings (ISOGEN). -
• Modeling Utility area in piping
• Modeling Heat Exchanger Piping.
8. Designation: PDS Piping Designer
Client: L&T IES, Baroda, Gujarat
Project: Continues Liquid Process London, England.
Period: From Jun 2009 to May 2010.
Responsibilities:-
• Designing all pump piping in CLP area
• Designing Plate exchanger piping in CLP 1 area
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self checking Isometric drawings (ISOGEN).
9. Designation: PDS Piping Designer
Client: Chemtex Global Engineers Pvt Ltd
Project: Cellulose Acetate Plant, China.
Period: From Feb 2009 to Jun 2009.
Responsibilities:-
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Modeling all vessel trim piping in Anhydride area.
• Self checking Isometric drawings (ISOGEN).
10. Designation: PDS Piping Modeller
Client: Becrel India Pvt Ltd. (JV –Reliance and Bechtel)
Project: Jamnagar Export Refinery Project.(JERP).
Period: From Feb 2006 to Feb 2009.
Responsibilities:-
1) OSBL Unit:-
A) RTF (Refinery Tank Farm )
• Reviewed P&ID for RTF Pipe Track area
• Prepared Line list for the Pipe Track area based on available P&ID’s.
• Completed the Track spacing required for the piping.
• Designing of LPG Spear piping.
• Designing of Pump-bay piping
• P & ID markup & DCN update
• Extracting & self checking Isometric drawings (ISOGEN).
B) MTF (Marine Tank Farm):-
• Reviewed P&ID for MTF Pipe Track area
• Prepared Line list for the Pipe Rack area based on available P&ID’s.
• Completed the rack spacing required for the piping.
• Extracting & self checking Isometric drawings (ISOGEN).
2) ISBL Unit:-
• Small bore lines routing in CRUDE area
• Updating of model as per DCN.
11. Designation: Piping Draughtsman.
Client: Gharada Chemical Ltd
Project: Hydrogenation & Oxidation Plant, (Lote)
Period: Jan 2005 to Feb 2006.
Responsibilities:-
• Modification of Equipment and Piping Layout.

5. • Preparation of Isometrics, Support layout.
Date of Birth : 03 Jan 1983.
Religion : Hindu
Languages Known : English, Hindi, and Marathi.
Nationality : Indian
Marital status : Married
Place : Navi Mumbai
Age : 33yrs.
I consider my self familiar with Chemical and Piping Design Engineering aspects.I am also
confident of my ability to work in team.
I here by declare that the information above is true to the best of my knowledge.
Chetan Patil
Declaration:
Personal Detail

6. • Preparation of Isometrics, Support layout.
Date of Birth : 03 Jan 1983.
Religion : Hindu
Languages Known : English, Hindi, and Marathi.
Nationality : Indian
Marital status : Married
Place : Navi Mumbai
Age : 33yrs.
I consider my self familiar with Chemical and Piping Design Engineering aspects.I am also
confident of my ability to work in team.
I here by declare that the information above is true to the best of my knowledge.
Chetan Patil
Declaration:
Personal Detail