Piping layout engineer havoing more than 11 years of piping design experience.

1. (Continued on Next Page)
Padmanabh M. Dhobale
G-013, Building No.183, St. No. 9 IBN Battuta Metro Station ● Dubai, UAE
Cell: (+971) 559145757 ● padma1282@rediffmail.com
PIPING DESIGN ENGINEER
Skilled Piping Engineer with over 11 years of progressive experience on diverse projects and facilities. Proficient
in layout detailing. Extensive knowledge of company standards viz. KOC.
AREAS OF EXPERTISE
Piping Layout ● 3D Modeling in PDMS ver 12.1 SP4, SP3D ● Smart Plant Review ● Navisworks Review
● AutoCAD ● Plot Plan Development● Line Routing ● Nozzle Orientation ● Rack Design ● MTO takeoff

PROFESSIONAL EXPERIENCE
DODSAL ENGINEERING & CONSTRUCTION PTE. LTD, DUBAI, UAE 2014 – Present
Project: EWTIP, KOC, Kuwait
Senior Piping Engineer
Perform range of tasks as area lead engineer for piping system for Tank Farm and Fuel Gas Distribution Area.
Study contract documents and client specification to determine project design. Develop and finalize overall plot
plan and equipment layout. Utilize PDMS software for 3D modeling, isometric extraction. Present layout during
client model review. Prepare model review tag closeout report.
 Design dike wall for storage tanks. Prepare line-routing diagram to design rack layout.
 Prepare and finalize nozzle orientation.
 Prepare structural information for equipment support platforms.
 Check civil loading data (structure and pipe rack).
 Determine foundation load data. Prepare and check T-post information.
 Comment on civil structural drawing, P&IDs, equipment engineering drawings and other elements.
 Zero/Intermediate/Bulk level MTO takeoff.
 Perform interdisciplinary check for all vendor and other discipline documents.
 Checked and issued AFC Isometrics (P and ID check, line routing, PMS check, support check, special
requirement check).
PETROFAC ENGINEERING INDIA PVT. LTD., MUMBAI, INDIA 2014
PROJECT: SOHAR REFINERY, OMAN
Senior Piping Engineer
Area engineer for Utility and WWT Facility. Developed overall plot plan. Reviewed offer documents for package
units. Reviewed vendor documents and interdisciplinary documents. Prepared and finalized nozzle orientation.
TOYO ENGINEERING INDIA LTD., MUMBAI, INDIA 2005 – 2014
Worked as Area Engineer to lead design and modeling of piping projects at major facilities for international
engineering firm. Advanced through positions of progressive responsibility.
PROJECTS: LISTED BELOW
ETHYLENE & BUTADIENE EXTRACTION UNIT, Egypt
Senior Piping Engineer
Area engineer in Wastewater Treatment Facility and Butadiene Extraction Unit. Developed unit plot plan.
Presented layout during client model review. Coordinated with Civil, Mechanical, Electrical, Instrumentation,
Process and Projects Departments for their input.
 Modeled equipment and piping using SP3D.
 Planned layout of hose station.
 Created detailed design of rack layout using line routing diagram.

2. Padmanabh M. Dhobale Resume Page 2
 Prepared and finalized nozzle orientation.
 Designed spiral staircase for storage tanks.
 Prepared and checked civil loading data (structure and pipe rack), and foundation load data.
 Prepared and checked T-post information.
 Commented on civil structural drawing, P&IDs and equipment engineering drawings.
 Selected pipe supports for lines, using pipe support standard and preparation of special support
 Used piping material specification during detailing phase and MTO take off.
 Coordinated flexibility check with stress group for stress critical lines.
 Checked and issued AFC Isometrics (P and ID check, line routing, PMS check, support check, special
requirement check).
 Zero/Intermediate/Bulk level MTO takeoff.
 Conducted interdisciplinary check for all vendor and other discipline documents.
 Prepared and finalized piping GA
DCU, PARADIP, ORISSA, INDIA
Senior Piping Engineer
Area Engineer for Fractionation Unit and Rack. Reviewed vendor documents and interdisciplinary documents.
Presented layout during client model review. Cleared model review tag and prepared tag closeout report.
 Prepared and finalized rack, technical structure. Utilized line routing diagram to design rack layout.
 Prepared and finalized nozzle orientation.
 Checked civil loading data and foundation load data.
 Prepared and checked T-post information.
 Finalized vessel clip information.
 Selected type of support from standards and marking. Designed special supports.
 Checked and issued AFC Isometrics (P and ID check, line routing, PMS check, support check, special
requirement check).
 Prepared and finalized piping GA.
KSRU,BHATINDA INDIA
Senior Assistant Piping Engineer
Worked as a Senior Assistant Piping Engineer for SRU unit.
 Prepared and finalized nozzle orientation.
 Checked civil loading data and foundation load data.
 Prepared and checked T-post information.
 Finalized vessel clip information.
 Selected type of support from standards and marking. Designed special supports.
 Checked and issued AFC Isometrics (P and ID check, line routing, PMS check, support check, special
requirement check).
 Prepared and finalized piping GA.
Shell ECC, Singapore
Support Team Member
Worked on support detailing team. Designed special support. Marked and detailed, using ABB support standard.
C2, C3, C4 Extraction (IOGR), Gujarat
Assistant Engineer
For Extraction Facility Project, routed line as per design requirement. Prepared mechanical and civil information.
Detailed support design of lines. Prepared special support sketches. Checked overall layout with SPR model for tag
clearance.
Yanbu Ethylene Glycol Cracker Unit, Yanbu, Saudi Arabia
Engineering Assistant
Assisted senior engineer with underground piping layout and routing.
(Continued on Next Page)

3. Padmanabh M. Dhobale Resume Page 3
Detailed manhole and catch basin. Checked civil IDC. Cleared tag to avoid clashing. Checked isometrics. Support
marking and type selection for AG lines.
Shell ECC Singapore (2005)
Engineering Assistant
Prepared Isometric drawings from 2D GA drawing. Extracted Bulk MTO. Prepared valve MTO.
EDUCATION
POST GRADUATE DIPLOMA: PIPING DESIGN (2005)
V.I.T, Pune, Maharashtra, India
B.E MECHANICAL (2004)
Y.C. College of Engineering, Nagpur University, Maharashtra, India
PERSONAL INFORMATION
Nationality –Indian ● Passport No-M2516534 ● Marital Status-Married