details of Solidworks software

1. PRESENTATION
ON
SUMMER TRAINING
SUBMISSION BY –
PANKAJ KUMAR
MECHANICAL ENGG 4TH YEAR
1873440905

3. CONTENS
 Introduction
 List of figure
 Work done
 Project
Advantages of Solidworks
 Learning after internship

4. ACKNOWLEDGEMENT
I wish to express my profound gratitude to Internshala which provide me an opportunity to learn a new skill.
During the pandemic it helps me a lot to grow up with the trending and in demand skills .Although whole training
was virtually organized but it was quite understandable with clear topic concepts.
The period of training 6 weeks passed with very efficient way The way of teaching of expert was fully satisfactory
all the section were suitably organized. There were lot of assignment and modules to work on.

5. INTRODUCTION
About the company –
Internshala is an internship and online training platform. To equip students with relevant skill through
Internship and online training,is the mission of the company.
About the Internship -
Internship was based on Drawing software “SOLIDWORKS” The Training consisted of SolidWorks-
Introduction, Interface and Sketching, Applying Features and Material, SolidWorks Assembly, SolidWorks Drawing. it contains
three main section these were 1. PART 2.ASSEMBLY 3. DRAWING
1. PART SECTION – In this section we learnt how to make sketch and then transform it in 3D object.
e.g. Pin, cylinder, sphere, etc
2.ASSEMBLY SECTION - In this section we made drawing of any object with help of the spare part previously made in Part
section. E.g. Knuckle joint, any structure etc
3.DRAWING SECTION – This section contained all details related to drawing.

7. FeaturesofSolidworks
Extruded Boss :-
The Extruded Boss is the most basic of all SOLIDWORKS features, and extrudes a sketch along a straight line path
to add material. As a sketched feature, it requires a sketch before use.

8. RevolvedBoss:-
Revolved Boss feature, which adds material by revolving a sketch around an axis. Remember, once
geometry has been created in your model, any flat face can be used as a sketching surface.

9. ExtrudedCut :-
The Extruded Cut is a tool for making holes and to cut into parts.

10. Fillet:-
Fillets serve to round off edges and/or corners by adding or removing material, depending on whether the edge is
internal or external.

11. FINAL PROJECT
Air Piston-Cylinder Assembly modules-

12. Spare part of
FINAL PROJECT

15. ADVANTAGES OF SOLIDWORKS
Flexibility
User friendly (Easy to learn)
Unusual material
Complex motion analysis can be done.
Complex surfaces can be Designed and their patterns can be viewed.