1. NISARG SHAH
1701 E 12th
Street Apt 15K Cleveland Ohio 44114 | (216) 246-2556 | nisargshahpatel202@gmail.com | www.linkedin.com/in/nisarg-shah-
Objective
Motivated and passionate individual doing Master’s in Electrical Engineering and 2+ years of experience and proven ability to take
instruction well seeking Electrical / Control Engineer position
Education
Cleveland State University, Ohio Aug ‘18
Master of Electrical Engineering, Expected Graduation – May ’20, GPA- 3.73/4.0
Kadi Sarva Vishwa Vidhyalaya, India July ‘13 to April ‘17
Bachelor of Electrical Engineering, GPA- 3.8/4.0
Technical skills & Software
Designing Software: AutoCAD, Revit, Eplan, MicroStation, PVsyst , SKM
PLC & SCADA: Allen-Bradley, Siemens, Delta, RS-Logix 500/5000, Micro-Logix, Intouch Wonderware. Ignition, HMI
Simulation Software: MATLAB Simulink, LabVIEW, Pspice, Proteus, ETAP
Power System: Power world Simulator, AcSELeatore Quickset5030, Manta MTS-5100 Test Set Amplifier
Work Experience
Electrical Compliance Engineer at EU Compliance Services LLC Aug ‘19
• Conducted on and off-site evaluation of machines to determine compliance with applicable U.S, Europe and Brazil product safety
and EMC standards i.e, ANSI, UL, NFPA 79, EN, IEC
• Prepare Electrical Control Design as per EN 13849 and do SISTEMA Analysis
• Do Machine risk assessment, arc flash evaluation and create arc flash, safety labels also provide safety training to client as per
OSHA and NFPA70E
Electrical Design Engineer Intern at GED Integrated Solution May ‘19 to Aug ‘19
• Design Electrical Enclosure as per NEC
• Design ladder-logic for Allen-Bradley PLC, cable scheduling, electrical diagrams and SCADA screens
Electrical Design Engineer Working at the GPI Projects Pvt. Ltd. May ‘17 to May ‘18
• Projects with senior electrical engineers on power distribution system design, one-line drawing, building automation, HVAC,
circuit tracing projects, panel directories, fire alarm, UPS design, SEL relays, arc fault studies
• Worked with C&S Electrical and ABB on circuit breakers program as a part of Amneal Pharmaceuticals 132kv substation project
• Part of team for Electrical Preventive maintenance (PM) program, Worked with GETCO (Gujarat Energy Transmission Corporation)
• Design 11kv bus trunking for Ball Aerocan Pvt Ltd
Trainee Engineer at the Harikrupa automation Pvt. Ltd Dec ‘16 to May ‘17
• Designed ladder diagram in AutoCAD and implemented control and electrical systems according to client’s requirements
• Programmed several families of Allen-Bradley, Siemens, Delta, Mitsubishi PLCs with equipping PLC/HMI according to
client’s requirements
• Troubleshoot PLC programs of the electrical systems
• Designing of SCADA (Wonderware and Intouch) based application screens
• Examined existing drawings on filed and redline them if necessary
• Prepared cable scheduling, electrical diagrams and Bill of Material (BOM)
Projects
Distribution Substation Power Transformer Protection using SEL 487E Relay April-2019
• Configured the values of CT compensation depending on types of winding
• Observed effect of internal and external fault on relay
Transmission line protection using SEL 411L Relay March-2019
• Calculated three zones of protection for short line and studied the alpha plane
• Observes Loss of potential, Switch on To Fault (SOTF) and Load Encroachment
Short Circuit analysis for bus protection system Nov-2018
• Performed an initial power flow solution and applied different faults using Power World Simulator
• Selected circuit breakers with high rating and lower cost
Design a new generation solar autonomous photovoltaic cleaning system Dec-2016
• Designed photovoltaic cleaning system to increase efficiency of solar generation
• Designed ladder diagram for Allen-Bradley for PLC ML-1000 and Scada Intouch Wonderware
Certification
• Professional AutoCAD Certification – Autodesk (September 2017)
• Professional Revit MEP 2018 Online Certification-Autodesk (October 2018)
• Electrical Project Supervisor License – Government of Gujarat India (May 2018)
• Preparing for Engineering in Training (EIT)
• Certified Machinery Safety Training in March 2020
Lawful citizen of USA, Permanent Resident