This documents demonstrate configuring VNC Server in Linux

1. If there is any issue at setup or connection contact support@k21technologies.com
Overview of Unix
Activity Guide 13
[Edition 1]
[Last Update 130815]
For any issues/help contact : support@k21technologies.com

2. If there is any issue at setup or connection contact support@k21technologies.com
Configuring VNC Server
Step1: Install the VNC Server
Step2:Edit the "/etc/sysconfig/v ncserv ers" file to configure the required displays. The following entries enable VNC for display numbers ":2" and ":3". Notice multiple "display:user" pairs
are defined on a single line, but the arguments for each display are defined separately.

3. If there is any issue at setup or connection contact support@k21technologies.com
Set the VNC password for any users defined in the "/etc/sysconfig/vncservers" file.
Enable the "vncserver" service for autostart and start the service.

4. If there is any issue at setup or connection contact support@k21technologies.com
Use the following commands to stop the service and disable autostart.
# service vncserver stop
# chkconfig vncserver off
install vncvieweronWindows(client-pc) andconnect

5. If there is any issue at setup or connection contact support@k21technologies.com
=============End of the Activity 13 Guide========