2. 1-
LAB PURPOSE
VLAN configuration is
fundamental skill. VLANs allow
you to segment your network
into multiple, smaller broadcast
domains. As a Cisco engineer, as
well as in the Cisco CCNA
exam, you will be expected to
know how to configure VLANs
on Cisco switches.
Task1 In preparation for VLAN configuration, configure a hostname
on Sw1 as well as the VLANs depicted in the topology.
Task2 Configure ports FastEthernet0/5 to FastEthernet0/8 as access
ports and assign them to the VLANs specified.
Task3 Verify your VLAN configuration using relevant show commands
in Cisco IOS.
VLAN number VLAN name Port
10 Sales Fa0/5
20 Management Fa0/6
30 Engineers Fa0/7
40 Support Fa0/8
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
3. 2- You are trying to reprovision a switch in a different part of your network. However, you still see
the old VLANs configured from the old network. How can you rectify the problem?
A. Upgrade the IOS
B. Type erase startup-config, confirm it, and reload.
C. Type clear vlan, confirm it, and reload.
D. Delete the vlan.dat, confirm it, and reload.
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
4. 3- What is the normal range for VLANs before you must use extended VLAN IDs?
A. VLAN 1 through 1001
B. VLAN 1 through 1002
C. VLAN 1 through 1005
D. VLAN 2 through 1002
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
5. 4- Which is a benefit to converting a network from a flat layer 2 network to a routed layer 3 VLAN-
enabled network?
A. Increased collision domains for increased bandwidth
B. Reduced complexity of design and operations
C. Flexibility of user management and design
D. Decreased number of broadcast domains for increased bandwidth
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
6. 5- What is the extended VLAN range?
A. VLAN 1002 to 4096
B. VLAN 1006 to 4096
C. VLAN 1006 to 4094
D. VLAN 1006 to 4092
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
7. 6- Which command(s) will delete a VLAN?
A. Switch(config)#vlan database
Switch(config-vlan)#no vlan 9
A. Switch(config)#vlan database
Switch(config-vlan)#delete vlan 9
A. Switch(config)#no vlan 9
B. Switch(config)#vlan 9 delete
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
8. 7- Which command(s) will delete a VLAN?
A. Switch(config)#vlan database
Switch(config-vlan)#no vlan 9
A. Switch(config)#vlan database
Switch(config-vlan)#delete vlan 9
A. Switch(config)#no vlan 9
B. Switch(config)#vlan 9 delete
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com
9. 8- Which is a correct statement about frames and VLANs?
A. Broadcast frames are sent to ports that are configured in different VLANs.
B. Unicast frames that are not in the MAC address table are flooded to all ports in all VLANs.
C. The ports that link switches together must be access links.
D. Frames with a destination MAC that are not in the MAC address table are flooded to only ports in
the respective VLAN.
09125783861
https://t.me/misgohar1
Projects & Teaching
www.misgohar.blogfa.com