HDF WOOD

1. HDF ( HIGH DENSITY FIBER
BOARD)
KOMAL R JAIN
JAYASHRI M
MAHANTHESH T
MEGHANA D BOHRA
MEGHANA R

2. HDF (HIGH DENSITY FIBREBOARD)
◦ HDF is an engineered wood product that is manufactured by hot pressing wood fibers that are
extracted from waste chips or wood pulp, and binding them into a board at very high pressure
using synthetic resins and binders.

3. WHAT IS HDF?
High Density Fiberboard (HDF) is an engineered wood
product composed of wood fiber extracted from chips and
pulped wood waste, formed by glue under immense
pressure and heat.
In fact, there’s even a step above HDF. Super-Refined
HDF (SRHDF) is like HDF, but uses smaller chips and
pulped wood waste which results in a stronger and more
durable material. Both HDF and SRHDF have all of the
attributes of solid wood, but unlike wood, they do not have
any grain and resists cracking in temperature and
humidity changes.

4. • IN MANUFACTURING PROCESS OF HDF SAW DUST
IS CRUSHED AT A MICRO LEVEL AND THAN
COMPRESSED TO MAKE A SHEETS AND THAN THEY
CUT BY SIZES.
• IT PRODUCT IS AN ENGINEERED WOOD.
• IT IS SAME LIKE A PARTICLE BOARD, MDF BUT IS
DENSER AND MORE STRONGER AND HARD
BECAUSE IT IS MADE BY WOODEN SAW OF A MICRO
CRUSH,
MANUFACTURING PROCESS OF
HDF

5. PROCESS
• FIRST A LOG IS SELECTED.
• THEN BARK IS REMOVED.
• THEN IT IS CHIPPED.
• THEN CHIPS ARE WASH TO REMOVE IMPURITIES.
• THEN IT IS STEAMED AND RESIN IS MIXED IN IT.
• AFTER STEAM IT COMES OUT IN THE FORM OF
SHEET.
• SHEET IS KEPT ON FIBER MAT AND THROUGH
THIS HOT PRESSING IS DONE AT 260 ⁰ C
• THEN SHEETS ARE CUT INTO APPROPRIATE SIZES
AND COOLED.

6. What are the benefits of HDF and
SRHDF?
• No Graining
HDF and SRHDF are made from very fine particles, there
is no noticeable grain. Which results in a better and
smoother finish for painting.
• No Cracking
Unlike solid wood, HDF and SRHDF do not crack -
even under severe fluctuations in temperature and
humidity, completely maintaining the integrity of the
finish.
• No Warping
Wood has a tendency to warp when temperatures
fluctuate. Which over time, causes unsightly gaps in your
cabinetry. HDF, however, does not experience movement
from expansion and contraction like traditional hardwoods
do, so there's no warping.
• Affordable
HDF and SRHDF are great options for a kitchen on a
budget. They are affordable, inexpensive options.

7. • USE IN CONSTRUCTION SITES.
• USE IN FURNITURE LIKE CHAIRS AND
TABLE.
• USED IN PARTITION.
• USE IN COVERING A WALL OR COLUMNS.
• USE IN KITCHENS SHUTTERS.
• USE IN DOOR.
• EMBOSSED WALL CLADDING.
•DECORATIVE DISPLAY PANEL.
•SEAT BACKS IN RAILWAYS ETC
HDF USES
• HDF is a very thin board, with a typical
thickness of 3mm-8mm.
• HDF is a highly moisture resistant material
which is stronger and harder than MDF.
• HDF is predominantly used in laminate flooring
products where the density is required, though
other uses include door skins and
underlayment.

8. SIZE :8FT X 4FT
THICKNESS : 8MM-35 MM
• HDF in 3d look are available.
•there are many colours are available.
• Hardboard is durable &
impact resistant
• Moisture resistant
• Relatively low cost compared
to plywood
• It comes with smooth surface
It has more strength compare
to particle board and MOF
• Hardboard itself is
not waterproof
• No natural wood
grain aesthetic
• Not as strong as
plywood
ADVANTAGES DISADVANTAGES

9. BRANDS
1. GREENPANEL CLUB HDF
Greenpanel Club HDF is a new class of wood-based panel
product and a perfect substitute for local plywood. The high-
performance board has excellent water resistance, high density,
durability and exceptional dimensional stability. That’s not all,
these boards are resistant to termites, virus, fungus and borer
proof.
APPLICATIONS:
Greenpanel Club HDF are ideal for a wide range of applications
such as wet areas, kitchen, bathroom, cupboards, paneling,
furniture, construction, commercial spaces interiors etc.
THICKNESS:
3 mm to 18 mm
SIZES:
Available in various sizes
EMISSION CLASS:
CARB, E1 & E2
PRICE:
95 per sq ft

10. 2. DARE WOOD INDUSTRIAL
SPECIFICATION
 Thickness:
2 To 3.2 mm
 Width:
1220 mm
 Length:
2440 mm
 Density:
810 kg/m3
 Glue: E2;E1;E0;CARB P2,F4 STAR
 Standard: ISO14001,ISO9001,FSC
 Usage: Furniture mainly
 Price: 108 persqft

11. 3. GREEN PLY