Project:
Engineering and execution, Subcontract Management, Review of Engineering and Execution Status and Monitoring Project Schedule for various EPC Projects
Project Type:
Refinery & Process Plants / Oil & Gas / Power (Coal & Gas Based) / Steel
This document provides a summary of Mohd Ghazi's career experience and qualifications. It outlines his 8+ years of experience in design, planning, execution, testing and commissioning of HVAC, firefighting, and plumbing systems for various residential and commercial projects in Saudi Arabia and India. It also lists his educational background of a B.Tech in Mechanical Engineering and various technical skills and computer programs.
AL-FARAJ Co was established in 1989 to provide maintenance and construction services. It has since expanded to offer various civil, mechanical, electrical, and road construction services. The company aims to provide high quality and timely services through a qualified workforce and latest technologies. It has completed numerous projects for multinational and local clients. AL-FARAJ prioritizes safety, quality, and customer satisfaction in all of its work. It has various subsidiaries and a large inventory of equipment and tools to execute civil infrastructure and construction projects.
Mend-A-Wall is a South African company established in 2005 that specializes in the installation, repair, and extension of concrete pre-cast walls and palisade fencing. The company has a manufacturing plant near Benoni that produces palisade fencing, walling, and kerbs. Mend-A-Wall aims to establish itself as a brand leader through quality products, reasonable prices, and superior customer service.
Sushil Kumar Khanduri is currently working as a Senior Executive Engineer at GE Renewable Energy in Vadodara, India since 2011. He has over 25 years of experience in quality assurance and inspection roles. Previously, he worked as a Quality Control Foreman at Jai Prakash Associates Limited from 2004 to 2011 inspecting fabricated, machined, and assembled parts for hydroelectric and cement plant equipment. He also spent 13.5 years as a Senior Quality Inspector at Harig India Limited from 1990 to 2004 inspecting hydraulic equipment components. Khanduri holds a Bachelor of Science degree in Physics, Maths, and Geology and certifications in non-destructive testing.
This document is a resume for Yogesh Padia, who has over 30 years of experience as a welding and NDT inspector in the oil and gas industry. He is seeking a senior leadership role coordinating QA/QC, NDT, and welding activities. He has extensive experience performing various NDT methods like ultrasonic, magnetic particle, and liquid penetrant testing on onshore and offshore sites across multiple countries. He is proficient in welding inspection and ultrasonic testing/interpretation. He has a strong safety and project management background with skills in scheduling, monitoring, and resource optimization.
Shaik Ghouse is a QA/QC Mechanical Inspector from India seeking a position in inspection. He has over 20 years of experience in mechanical inspection and non-destructive testing for oil and gas companies. He is certified in UT, MT, PT, RT and has experience inspecting items like tubular goods, valves, and engineered components. Ghouse is proficient in inspection software and Microsoft Office, and aims to utilize his skills and experience to achieve project targets.
This document contains a resume for Wilfredo Q. Serognas Jr., a mechanical technician seeking a position. It summarizes his work experience over 11 years in construction, commissioning, shutdown and maintenance projects for petrochemical, oil refineries, steel and fertilizer plants in Saudi Arabia. It also lists his education in computer science and electronic communication engineering from Cebu Institute of Technology University in the Philippines. His objective is to use his wide experience to benefit an organization.
This document provides a summary of Mohd Ghazi's career experience and qualifications. It outlines his 8+ years of experience in design, planning, execution, testing and commissioning of HVAC, firefighting, and plumbing systems for various residential and commercial projects in Saudi Arabia and India. It also lists his educational background of a B.Tech in Mechanical Engineering and various technical skills and computer programs.
AL-FARAJ Co was established in 1989 to provide maintenance and construction services. It has since expanded to offer various civil, mechanical, electrical, and road construction services. The company aims to provide high quality and timely services through a qualified workforce and latest technologies. It has completed numerous projects for multinational and local clients. AL-FARAJ prioritizes safety, quality, and customer satisfaction in all of its work. It has various subsidiaries and a large inventory of equipment and tools to execute civil infrastructure and construction projects.
Mend-A-Wall is a South African company established in 2005 that specializes in the installation, repair, and extension of concrete pre-cast walls and palisade fencing. The company has a manufacturing plant near Benoni that produces palisade fencing, walling, and kerbs. Mend-A-Wall aims to establish itself as a brand leader through quality products, reasonable prices, and superior customer service.
Sushil Kumar Khanduri is currently working as a Senior Executive Engineer at GE Renewable Energy in Vadodara, India since 2011. He has over 25 years of experience in quality assurance and inspection roles. Previously, he worked as a Quality Control Foreman at Jai Prakash Associates Limited from 2004 to 2011 inspecting fabricated, machined, and assembled parts for hydroelectric and cement plant equipment. He also spent 13.5 years as a Senior Quality Inspector at Harig India Limited from 1990 to 2004 inspecting hydraulic equipment components. Khanduri holds a Bachelor of Science degree in Physics, Maths, and Geology and certifications in non-destructive testing.
This document is a resume for Yogesh Padia, who has over 30 years of experience as a welding and NDT inspector in the oil and gas industry. He is seeking a senior leadership role coordinating QA/QC, NDT, and welding activities. He has extensive experience performing various NDT methods like ultrasonic, magnetic particle, and liquid penetrant testing on onshore and offshore sites across multiple countries. He is proficient in welding inspection and ultrasonic testing/interpretation. He has a strong safety and project management background with skills in scheduling, monitoring, and resource optimization.
Shaik Ghouse is a QA/QC Mechanical Inspector from India seeking a position in inspection. He has over 20 years of experience in mechanical inspection and non-destructive testing for oil and gas companies. He is certified in UT, MT, PT, RT and has experience inspecting items like tubular goods, valves, and engineered components. Ghouse is proficient in inspection software and Microsoft Office, and aims to utilize his skills and experience to achieve project targets.
This document contains a resume for Wilfredo Q. Serognas Jr., a mechanical technician seeking a position. It summarizes his work experience over 11 years in construction, commissioning, shutdown and maintenance projects for petrochemical, oil refineries, steel and fertilizer plants in Saudi Arabia. It also lists his education in computer science and electronic communication engineering from Cebu Institute of Technology University in the Philippines. His objective is to use his wide experience to benefit an organization.
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
This document contains the resume of S.M. Babu, a 26-year-old male from Tamil Nadu, India seeking a position in the manufacturing industry. He has 5 years of experience working in steel fabrication and automotive manufacturing companies, most recently as a Painting Engineer at Techno Fab Mfg Ltd. He holds a Diploma in Mechanical Engineering and has experience in production, quality control, and project management. His skills include welding inspection, painting inspection, and coordinating with customers and third-party inspectors. He is proficient in MS Office and seeks a role as a Production, Painting, Quality Control, or Incoming Quality Engineer.
The document is a resume for Ansal Assis, a welding inspector with over 4 years of experience in quality assurance and inspection roles in fabrication, erection, and installation projects for refineries, petrochemical plants, and oil and gas facilities in Saudi Arabia. Some key qualifications and experiences mentioned include CSWIP and TWI certification in welding inspection, expertise in inspection, testing, and documentation according to international codes and standards, familiarity with various technical drawings and welding/material standards, and management of quality programs. Previous roles involved inspection of fabrication, welding, materials, coatings, and testing as well as reviewing radiographs and documentation.
Abdul Halim Sadikun has over 15 years of experience in quality assurance roles in various industries including oil and gas, power plants, and steel construction. He holds a Diploma in Welding Technology and certifications in magnetic particle testing and dye penetrant testing. His most recent role was as a Quality Representative at RINA Inspection Services where he performed inspections, witnessed tests, and reviewed documentation. He is seeking a quality role where he can utilize his inspection, auditing, and project coordination skills.
Mohammed Ahmed Hassan Elfangarey is a mechanical engineer with over 9 years of experience in industrial construction, including roles as an HVAC engineer, piping engineer, and mechanical engineer. He holds a B.Sc. in mechanical engineering and is a registered professional engineer. He is seeking new engineering challenges that effectively utilize his experience.
This document is a resume for Arnold Romaguerra Antonio, an electrical engineer with 7 years of experience seeking new employment opportunities. He has a Bachelor's degree in Electrical Engineering and is proficient in AutoCAD, Microsoft Office, and project management software. His work experience includes positions as a Lead Electrical Engineer, Field Engineer, and QC Engineer on commercial construction projects in Qatar and the Philippines. He is interested in roles involving electrical construction, estimating, procurement, design, and technical support. References are provided.
1) Mahesh Pandit is a senior QA/QC engineer with over 16 years of experience in NDT inspection. He holds ASNT NDT Level III certification in RT, UT, MT, and PT.
2) He has worked on numerous pipeline projects in India and abroad for clients such as ADCO, ARAMCO, and GAIL. His responsibilities include verifying NDT tests, interpreting results, and ensuring quality.
3) He is skilled in various NDT techniques including RT, UT, MT, PT, TOFD, and PAUT. He also has experience in welding inspection, materials testing, and acting as an NDT manager/coordinator.
Mohammed Rizwan Uddin is seeking a challenging position utilizing his 8+ years of experience in non-destructive testing (NDT). He is currently an ASNT NDT Level III inspector at Alstom India Ltd, where he has successfully completed several boiler projects, introduced new NDT techniques, and received appreciation letters from customers. Rizwan aims to join an organization where he can continue contributing his skills and expertise through efficient, professional, and cost-effective work.
This document contains a curriculum vitae for Mubarak M.K. that summarizes his personal and professional experience. It includes details about his 8 years of experience in mechanical engineering roles in Qatar and India, including his current role as a Senior Mechanical Project Engineer. It also lists his educational qualifications and certifications.
Ahmed El Sayed El Zaidy is a mechanical QC engineer from Egypt seeking a career utilizing his engineering skills. He has over 10 years of experience in quality control and mechanical site engineering roles for projects in Saudi Arabia, Iraq, and Egypt. His resume lists positions with Saudi Binladin Group, TAAM Company, and Al-Futtaim Carillion. He has expertise in international standards, material inspection, scheduling, and supervising equipment installation. El Zaidy holds a BSc in mechanical power engineering and certifications in API 1104, hydraulics, confined spaces, and safety courses.
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...Saleem P.P
This document contains the resume of Saleem Puthiya Ponnambath, who has 27 years of experience in the oil and gas industry in Gulf countries from 1989 to 2016. It lists his contact information, current position as a mechanical supervisor for oil and gas refinery and offshore maintenance, previous positions held, qualifications, certifications, skills, responsibilities and experience in areas like safety, maintenance, fabrication, welding, rigging, scaffolding, coating, testing, and more. It provides details of his educational background, nationality, family status and expectations from prospective employers.
Over 6.7 years’ experience in Oil & Gas design as a Piping /Pipe
Line / Mechanical Draftsman.
Experience includes site visit, pressure vessel equipment arrangement &
Nozzle Orientation, fabrication detail drawing, piping layouts, isometric
& GAD Drawings, Test Pack Preparation & Co-ordination.
Piping & Equipment Design in PDMS & SP3D, clash Checking & solving,
Extractions all GA Drawing & isometrics.
Familiar with international codes & standard like API, ASME & ISO etc.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
R.S.Senthil Kumar is a QA/QC inspection engineer with over 15 years of experience in structural steel, piping, platework, mechanical, and painting inspections. He currently works as a QA/QC welding inspection engineer for DODSAL ENGINEERING and CONSTRUCTION in Kuwait. Previously, he worked for 5 years in South Africa and held roles with companies in Dubai and India. He has extensive experience in welding inspection, NDT testing, and ensuring quality control on various oil, gas and industrial projects. He holds certifications in welding inspection, NDT testing, and quality assurance/control.
N. Srinivasan provides a summary of his career experience in welding inspection and non-destructive testing over 12 years. He has worked on various oil, gas and power projects. His roles have included quality control welding inspector, third party inspector, and engineering inspection roles. He lists his educational qualifications as a Diploma in Mechanical Engineering with First Class Honors and various welding and NDT certifications.
Pre engineering building manufacturer (roof shop )roofshop
This document provides information about RoofShop Building Systems Solutions, a proprietorship firm established in 2010 that provides pre-engineering building and steel structure solutions. It offers products and services for various industries and specializes in designing and installing cold storage facilities. The company aims to become a leading technology-driven company in steel construction through quality, innovation, and social responsibility. It has manufacturing facilities in Faridabad and Moradabad and works with software like STAAD and AutoCAD.
This document is a curriculum vitae for N. Sadhasivam that provides details of his professional qualifications and work experience in quality control and inspection roles for oil and gas projects. It lists his qualifications in non-destructive testing including ultrasonic testing, welding inspection, and painting/coating inspection. It also summarizes his over 25 years of experience in inspection and quality control roles on various offshore and onshore pipeline and facility projects around the world.
This document is a curriculum vitae for N. Sadhasivam that summarizes his qualifications and experience. It lists his educational background in mechanical engineering and professional qualifications in non-destructive testing including ultrasonic testing, welding inspection, and painting/coating inspection. It also provides a high-level summary of his 25 years of experience in inspection, quality control, and non-destructive testing for oil and gas, petrochemical, and industrial projects. Currently, he works as an operating company quality control representative on an offshore pipeline replacement project in Gabon, West Africa.
Kashif Ali is an electrical QA/QC engineer with over 6 years of experience. He holds a Bachelor's degree in electrical engineering and various technical diplomas. His skills include electrical design, installation, testing and commissioning. He is currently employed as an electrical QA/QC engineer on an Aramco project in Saudi Arabia.
Heshamuddin is a civil engineer with over 4 years of experience in quality control and as a site engineer on projects in Saudi Arabia and India. He has a Bachelor of Technology in Civil Engineering and additional qualifications in geography and science. His skills include AutoCAD, MS Office, quality control testing, and ensuring construction meets specifications. He seeks a challenging career that provides opportunities for skills enhancement and career growth.
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
This document contains the resume of S.M. Babu, a 26-year-old male from Tamil Nadu, India seeking a position in the manufacturing industry. He has 5 years of experience working in steel fabrication and automotive manufacturing companies, most recently as a Painting Engineer at Techno Fab Mfg Ltd. He holds a Diploma in Mechanical Engineering and has experience in production, quality control, and project management. His skills include welding inspection, painting inspection, and coordinating with customers and third-party inspectors. He is proficient in MS Office and seeks a role as a Production, Painting, Quality Control, or Incoming Quality Engineer.
The document is a resume for Ansal Assis, a welding inspector with over 4 years of experience in quality assurance and inspection roles in fabrication, erection, and installation projects for refineries, petrochemical plants, and oil and gas facilities in Saudi Arabia. Some key qualifications and experiences mentioned include CSWIP and TWI certification in welding inspection, expertise in inspection, testing, and documentation according to international codes and standards, familiarity with various technical drawings and welding/material standards, and management of quality programs. Previous roles involved inspection of fabrication, welding, materials, coatings, and testing as well as reviewing radiographs and documentation.
Abdul Halim Sadikun has over 15 years of experience in quality assurance roles in various industries including oil and gas, power plants, and steel construction. He holds a Diploma in Welding Technology and certifications in magnetic particle testing and dye penetrant testing. His most recent role was as a Quality Representative at RINA Inspection Services where he performed inspections, witnessed tests, and reviewed documentation. He is seeking a quality role where he can utilize his inspection, auditing, and project coordination skills.
Mohammed Ahmed Hassan Elfangarey is a mechanical engineer with over 9 years of experience in industrial construction, including roles as an HVAC engineer, piping engineer, and mechanical engineer. He holds a B.Sc. in mechanical engineering and is a registered professional engineer. He is seeking new engineering challenges that effectively utilize his experience.
This document is a resume for Arnold Romaguerra Antonio, an electrical engineer with 7 years of experience seeking new employment opportunities. He has a Bachelor's degree in Electrical Engineering and is proficient in AutoCAD, Microsoft Office, and project management software. His work experience includes positions as a Lead Electrical Engineer, Field Engineer, and QC Engineer on commercial construction projects in Qatar and the Philippines. He is interested in roles involving electrical construction, estimating, procurement, design, and technical support. References are provided.
1) Mahesh Pandit is a senior QA/QC engineer with over 16 years of experience in NDT inspection. He holds ASNT NDT Level III certification in RT, UT, MT, and PT.
2) He has worked on numerous pipeline projects in India and abroad for clients such as ADCO, ARAMCO, and GAIL. His responsibilities include verifying NDT tests, interpreting results, and ensuring quality.
3) He is skilled in various NDT techniques including RT, UT, MT, PT, TOFD, and PAUT. He also has experience in welding inspection, materials testing, and acting as an NDT manager/coordinator.
Mohammed Rizwan Uddin is seeking a challenging position utilizing his 8+ years of experience in non-destructive testing (NDT). He is currently an ASNT NDT Level III inspector at Alstom India Ltd, where he has successfully completed several boiler projects, introduced new NDT techniques, and received appreciation letters from customers. Rizwan aims to join an organization where he can continue contributing his skills and expertise through efficient, professional, and cost-effective work.
This document contains a curriculum vitae for Mubarak M.K. that summarizes his personal and professional experience. It includes details about his 8 years of experience in mechanical engineering roles in Qatar and India, including his current role as a Senior Mechanical Project Engineer. It also lists his educational qualifications and certifications.
Ahmed El Sayed El Zaidy is a mechanical QC engineer from Egypt seeking a career utilizing his engineering skills. He has over 10 years of experience in quality control and mechanical site engineering roles for projects in Saudi Arabia, Iraq, and Egypt. His resume lists positions with Saudi Binladin Group, TAAM Company, and Al-Futtaim Carillion. He has expertise in international standards, material inspection, scheduling, and supervising equipment installation. El Zaidy holds a BSc in mechanical power engineering and certifications in API 1104, hydraulics, confined spaces, and safety courses.
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...Saleem P.P
This document contains the resume of Saleem Puthiya Ponnambath, who has 27 years of experience in the oil and gas industry in Gulf countries from 1989 to 2016. It lists his contact information, current position as a mechanical supervisor for oil and gas refinery and offshore maintenance, previous positions held, qualifications, certifications, skills, responsibilities and experience in areas like safety, maintenance, fabrication, welding, rigging, scaffolding, coating, testing, and more. It provides details of his educational background, nationality, family status and expectations from prospective employers.
Over 6.7 years’ experience in Oil & Gas design as a Piping /Pipe
Line / Mechanical Draftsman.
Experience includes site visit, pressure vessel equipment arrangement &
Nozzle Orientation, fabrication detail drawing, piping layouts, isometric
& GAD Drawings, Test Pack Preparation & Co-ordination.
Piping & Equipment Design in PDMS & SP3D, clash Checking & solving,
Extractions all GA Drawing & isometrics.
Familiar with international codes & standard like API, ASME & ISO etc.
Respected Sir,
I, Shaju C.K., Diploma in Mech. Engineering, also having AWS-CWI, BGAS – CSWIP Grade 2 & ASNT- LVL II in RT,UT,PT & MPT, Professional executive with over 13 year’s work experience in Quality Control Management related to the Welding, Piping, Structural, Tanks/ Vessels & Painting with leading companies from upstream & downstream Industry in UAE / KSA / QATAR / IRAQ, India. Able to motivate personnel to high performance standards and excellence, I wish to apply for the suitable post related to my profile. I work now as freelance Inspection Engineer located in INDIA. I desire to work for your esteemed Organisation. I am extremely hardworking and sincere in any job I undertake. Kindly give me a chance to work and prosper in your organisation.
I am enclosing my resume for your kind consideration and perusal. I hope my candidature will be found suitable for your esteemed Organisation.
Waiting for a favourable response.
Thanking you
Kind Regards
Shaju Chittilappilly
+91 9167918074
R.S.Senthil Kumar is a QA/QC inspection engineer with over 15 years of experience in structural steel, piping, platework, mechanical, and painting inspections. He currently works as a QA/QC welding inspection engineer for DODSAL ENGINEERING and CONSTRUCTION in Kuwait. Previously, he worked for 5 years in South Africa and held roles with companies in Dubai and India. He has extensive experience in welding inspection, NDT testing, and ensuring quality control on various oil, gas and industrial projects. He holds certifications in welding inspection, NDT testing, and quality assurance/control.
N. Srinivasan provides a summary of his career experience in welding inspection and non-destructive testing over 12 years. He has worked on various oil, gas and power projects. His roles have included quality control welding inspector, third party inspector, and engineering inspection roles. He lists his educational qualifications as a Diploma in Mechanical Engineering with First Class Honors and various welding and NDT certifications.
Pre engineering building manufacturer (roof shop )roofshop
This document provides information about RoofShop Building Systems Solutions, a proprietorship firm established in 2010 that provides pre-engineering building and steel structure solutions. It offers products and services for various industries and specializes in designing and installing cold storage facilities. The company aims to become a leading technology-driven company in steel construction through quality, innovation, and social responsibility. It has manufacturing facilities in Faridabad and Moradabad and works with software like STAAD and AutoCAD.
This document is a curriculum vitae for N. Sadhasivam that provides details of his professional qualifications and work experience in quality control and inspection roles for oil and gas projects. It lists his qualifications in non-destructive testing including ultrasonic testing, welding inspection, and painting/coating inspection. It also summarizes his over 25 years of experience in inspection and quality control roles on various offshore and onshore pipeline and facility projects around the world.
This document is a curriculum vitae for N. Sadhasivam that summarizes his qualifications and experience. It lists his educational background in mechanical engineering and professional qualifications in non-destructive testing including ultrasonic testing, welding inspection, and painting/coating inspection. It also provides a high-level summary of his 25 years of experience in inspection, quality control, and non-destructive testing for oil and gas, petrochemical, and industrial projects. Currently, he works as an operating company quality control representative on an offshore pipeline replacement project in Gabon, West Africa.
Kashif Ali is an electrical QA/QC engineer with over 6 years of experience. He holds a Bachelor's degree in electrical engineering and various technical diplomas. His skills include electrical design, installation, testing and commissioning. He is currently employed as an electrical QA/QC engineer on an Aramco project in Saudi Arabia.
Heshamuddin is a civil engineer with over 4 years of experience in quality control and as a site engineer on projects in Saudi Arabia and India. He has a Bachelor of Technology in Civil Engineering and additional qualifications in geography and science. His skills include AutoCAD, MS Office, quality control testing, and ensuring construction meets specifications. He seeks a challenging career that provides opportunities for skills enhancement and career growth.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
artificial intelligence and data science contents.pptxGauravCar
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Manager Procurement & Subcontract
1. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
Key Experience: (22+years) (Oil&Gas20 Years)
Twenty (22+) years experience in Project Materials Procurement (Major
Materials and Equipment), Logistics, Supply chain & Subcontract (Oil &
Gas 12.5 years with Saudi Aramco in Saudi Arabia, Iron & Steel 1.7
years with Vizag Steel Plant India, around (1) one year experience with
Mining Industry in Australia – NSW and (1.6) years experience with New LNG Train
Project, Client Sonatrach GNL2K BP 471 Skikda 21000 in Algeria, and (1) year
experience with Zubair Oil Field-ENI-IRAQ, Client South Oil Company Contractor (JV) of
Sicim S.p.A – Drake&Scull Abu Dhabi: Present - Ichthys Project Onshore LNG Facilities
at Darwin in Australia, Contractor JKC Australia LNG Pty Ltd. (JV) of JGC/KBR/Chiyoda:
Duration (5 -Years) October 2013 to November 2018.
Codes & Standards Proficiency:
1. ASME, ANSI, ASD, ASTM, API, BS, IS.
2. Saudi Aramco: SAMSS, SAER, SAES, SAEP, SAIR
Professional Experience:
Procurement:
Procurement structure, process and technology evaluation, Assessment of current
procurement spend, Procurement performance measurement, Procurement risk
assessment, determining suppliers & Subcontractors qualifications, Assessment of the
supply market, Selecting and confirming suppliers & Subcontractors, Facilitating supplier
negotiations, Designing, communicating and analysing RFPs and RFQs and Monitoring
procurement benefits
Project:
Engineering and execution, Subcontract Management, Review of Engineering and
Execution Status and Monitoring Project Schedule for various EPC Projects
Project Type:
Refinery & Process Plants / Oil & Gas / Power (Coal & Gas Based) / Steel
Training / Course Attended:
1. Stress Analysis (Steel & Piping)
2. Financial Risk Management
3. ISO 9000: 2004
4. Statistical Quality Systems & its Application
Career Highlights:
From - January 1996 - 1997July (Vizag Steel Project, Andhra Pradesh, India.)
Company Name. JAYKAY ENGINEERS (P) Ltd
Position Held. Engineer- Procurement
From – August 1997- 2009 December (12.4 years) in Saudi Arabia
Company Name. AL HAMMAM COMPANY Ltd. (EPC) Contractor
Client Name. SAUDI ARAMCO
Position Held. Manager- Procurement & Subcontract (technical)
From- February 2010 - December- 2010 (NSW-Australia)
Company Name. MINING COMPANY Joy Inc.
Position Held. Dy. Manager- Procurement & Subcontract
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 1 of 11
2. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
From- January 2011- April 2012 - New LNG Project (Algeria)
Company Name. Dodsal Engineering & Construction Pte Ltd.
Position Held. Sr. Engineer- Procurement and Subcontract
From- September 2012-August 2013-Zubair Oil Field - ENI- IRAQ
Company Name. Drake & Scull Oil & Gas Division-Abu Dhabi
Position Held. Project Procurement Manager
From- October 2013-November 2018-Ichthys Project Onshore LNG Facilities
Company Name. JKC Australia LNG Pty Ltd (JGC/KBR/Chiyoda) Darwin- Australia
Position Holding. Sr. Manager- Procurement & Subcontracts
Areas of Expertise included:
Twenty (22+) years experience in the field of EPC, Design, Engineering, Procurement,
Subcontract & Construction (From Concept- Commissioning), Projects include Upgrade
of Refineries, LNG Facilities, Bulk Plants, Tank-form Areas, GOSP Support Facilities,
Petrochemicals, Power Plants and Steel Industries.
Responsible for the preparation and interpretation of Material Procurement statements,
Budgets, Cost analysis, Project feasibility studies, Procurement & Logistic plan and other
related reports to provide management with timely and meaningful information.
Twenty (20+) years prime experience in preparation of (PR/MR) Purchase/Material
Requisitions for Project Materials & Equipment, Civil, Mechanical, Electrical and
Instrumentation as per international/ Saudi Aramco specifications and requirements.
Ensuing enquiries (RFQ) to obtain techno commercial offer from reputed Vendors and
Manufacturers globally, evaluating proposal technically & commercially as per projects
requirements including price negotiations and Vendor assessments (For LSTK and
LSPB projects).
Finalizing Vendors & Subcontractors, preparing and tracking purchase orders as per
International/ Saudi Aramco standard & requirements. Follow up and collection of NMR
601, 602, 603 and SPDP, from respective Vendors in order to submit client/end-user’s
approval. Preparation and submission of (IAP) Inspection Assignment package and final
disposal package to client in order close the Projects Procurement process.
Excellent interpersonal, communication, team building, people management, conflict
management, analytical and problem solving skills, Experience in working with people
from different ethnic backgrounds. The good command of business written, reporting
and spoken English, Communication skills, Computer literate and well organized with
systematic work approach
1. Equipment Procured:
Pressure Vessels & Heat Exchangers - As per International/Aramco standard and
specification, placing order to subcontractor, tracking & monitoring.
Heavy Pumps – As per project requirements and approved data sheet (Sulfur feed
Pump & Hot water Pump, Positive displacement & Centrifugal Pumps, Vacuum Pump
with compressor, Vertical Maximum flow pumps, Effluent Water Pumps, Centrifugal
Pump Sea water RPM 6756, Submersible pumps, Higher solid & Sludge transfer pumps
Compressors - As per project requirements and approved data sheet (Rotary type Oil
free skid mounted, Centrifugal, Reciprocating, Gas, Air & Screw type Compressors etc.)
Boiler and Accessories – Columns and Heat Exchangers etc.
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 2 of 11
3. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
Procuring of Heavy Lifting Equipments - Crane having capacity in different tonnage,
Forklift, Lifting tools and equipment including different size of Spreader Beam, Sling d
shackles selection of hydraulic trailers etc.
Procuring of Jib Cranes, Generators, Vehicle & Equipments, required for Projects
and Constructions in (Oil & Gas) sector – As per Saudi Aramco/international
requirements and specifications
2. Subcontractors & Contracts finalized:
Project Design Sub Contractor
NDT – Contractor
Scaffolding - Contractor
Heavy Lifting – Sub Contractor
Chemical – Cleaning Sub Contractor
Insulation – sub Contractor
Fireproofing Sub Contractor
Water Proofing Sub Contactor
Asphalting – Sub Contractor
Roofing Sub Contractor
Fire Alarm System Sub Contractor
HVAC – System – Sub Contractor
VESDA – System – Sub Contractor
Subcontractors for Civil, Mechanical, Electrical and Instrumentation works Finalizing,
Monitoring, Controlling and tracking sub contractors for various EPC project.
Experience in Civil, Mechanical, Electrical & Instrumentation Materials
Procurement:
1.Civil.
Reinforcing Bars – Anchor Bolts – Different type, RTR Pipes & Fittings – Expansion
joint - Structural Steel - Ladder Rings, Manhole Covers- Catch Basin–Plywood and
Lumbers- Ready Mix Concrete – Doors windows and Frame – Hollow Metal, Blast
Resistant, Wood etc. All Interior Items &Toilet Accessories - Finalizing the HVAC
system, Fire alarm system & VESDA system, materials as well as subcontractor
Finalizing the materials and subcontractor for Roofing, Insulation, Fireproofing, Block
work and waterproofing. Finalizing and procuring required Lighting fixers, Finalizing
kitchen equipment and suppliers as per standard and finalizing subcontractor. Well
familiar with all civil consumables required for construction and preparing purchase
orders (LPO)
Finalizing the sub contractor for excavation and backfilling, tracking and monitoring the
activities on daily basis.
Procuring and hiring all vehicles and equipments required for construction including
Scaffolding and other support services.
2. Mechanical.
Pipes – Different size CS & SS- Flanges – Different Class, specification and size,
Fittings – Different specification and size - Valves – Including Pressure Relief valves,
Pressure Regulators, Control Valves different size and class (all kind of valves different
class & Size including MOV) - Spectacle Blind – Different size - Gasket – Different type
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 3 of 11
4. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
and size. - Stud Bolts – Fire Fighting Equipment and Hose reels- Y- Strainer
Conical – Strainer - Steam Strap etc.
All consumables and tools including Paints, Garnets, Welding Electrode different size,
filler wires, Cutting Machine, Grinding Machine, cutting wheels, Grinding wheels, Fire
Blanket Lifting Equipment and welding accessories as per International /Saudi Aramco
standards and specifications.
3.Electrical.
Electrical Cables – Low voltage and Medium voltage - Cable Trays and Fittings
different size& type - Conduit and Fittings PVC Coated - per area classification
requirements -Lighting Fixers – As per the IFC standard as well as area classification,
explosion proof /weatherproof depends on the class & zone - Junction Boxes – As per
area classification - Panel Boards – Explosion proof/ weatherproof as per IFC and area
classifications- MOV – Local Control Panels - Relay Panels- Commissioning
assistance/ services: Beacon & Horn – Lighting Poles – Circuit Breakers- Emergency
Eyewash, Substations, Step-up & Step-down transmission, Distribution substation ,
Under Ground distribution Substation, Collector & Conversion substation(200-2000 KVA)
Draw-out units and Switchgears, Power Plant 490MW (CCPP) (EPC) Construction,
5&3Nos. Gas & Steam Turbine Generator: Procuring necessary equipments, tools,
Consumables including calibration services required for field constructions. Floating
enquires preparing and placing required purchase orders, finalizing adequate
Vendors & Sub contractors for field assistance and commissioning services.
4. Instrumentation.
Instrumentation Cables – Different size and type as per area classification-
Transmitters – Temperature transmitters, Differential Pressure Transmitters, Flow
indicator Transmitters and analyzers etc. - Orifice Plates – Flow Conditioner/ Profile
plates – Level gauges & Level indicators – Temperature Gauges- RTD and Thermo
well – Temperature Gauges with Thermo well – Combustible Gas detector-
Solenoid Operated Valves – Pressure Gauges – Pressure Regulators –Process
Control System (PCS) – ESD & DCS
Procuring all kinds of tools and tackles, testing and commissioning equipments,
calibration equipments, consumables, field assistance and commissioning and
precommissioning subcontractors and Vendors etc.
Projects Completed: Job Title: Procurement Manager
SL
#
Contract # Projects Name & Locations
USD$
Million
Duration
1 6600019758
Sulfur Emission Control Project at Berri
Gas Plant: Year: 2007 -2009
The project includes detailed design,
procurement, construction and
commissioning of Degassing Project. It is
an environment protection project that
reduces the H2S level from recovered
molten sulfur. The control system package
includes Honeywell TDC 3000 and
Triconex TMR PLC
80.5 2 years
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 4 of 11
5. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
2 6600018741
Yanbu Gas Plant Expansion Utility and
Building Project :Year: 2005-2007
This project includes procurement,
Construction, transportation and erection of
1 x 480T Boiler, Erection of 1 x Flue stack,
1x Boiler economizer, 7 x Air & Gas ducts,
including Civil foundations, operation and
security building fully furnished.
35.00 2 years
3 44353/000
Bulk Plant Modernization Projects –
Central Region-BI # 37581,82 ,83,84
: Year From -1997
This project includes but not limited to the
following activities. Product Recovery Tank
And associated Piping.
Expansion Of Existing Electrical System
Tank Farm Dike Walls
New Terminal Management System
Construction Of 3 Concrete Oily Water
Sumps
Installation of Vertical Maximum Flow
Pump & Effluent Water Pump.
Pump Stations
Installation Of New Unloading Facilities
Oily Water Separation System
Pipeline Metering & Proving System
55.5 2 years
4 6600007368
Integration of New Power & Steam
Generation (COGEN) Riyadh Refinery
Three existing Combustion Gas Turbine at
Riyadh Refinery, shall each be fitted with
Heat Recovery Steam
Generator (HRSG) to utilize waste heat
(gas) for the production of high pressure
steam
28.5 2 years
5 6600001741
Crude and Vacuum Heater Replacement
Project –(CVHR) Riyadh Refinery
This project scope includes foundation for
Heaters,fuel skids, process vessels and
Hot oil heater, Stacks, Concrete paving,
Oily water system, Pipe rack/Pipe
supports/Platforms, Structural works, CS
piping, P5 and P9 special Alloy piping,
Steam tracing, Hydrostatic testing,
Insulation, Crude Heater and Vacuum
Heater Installation, Dry out, Fuel Oil Skids
Erection, Vacuum Tower Modification, Post
Weld Heat Treatment, Tie-ins, Electrical
and Instrumentation works.
35.8 2 years
6 4400691/00
Royalty Crude Metering Station at Riyadh
Refinery (Details upon request blow & all)
1.2 1 year
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 5 of 11
6. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
7 6600008082
Revamp of Crude Heaters & Debutanizer
at Rabigh Refinery- Shutdown Work
14.5 90 Days
8 6600007992
Fire and Safety Upgrade at Riyadh
Refinery and Najran Bulk Plant
20.00 2 years
9 400591/004
SFC - Additional Steam supply – Riyadh
Refinery
1.2 90 days
10 6600005107
Maintenance service@ Rastanura &
Abqaiq Refinery
9.2 2 years
11 B.I10-03540
SFC - Manpower, Equipment and
Materials Supply at Riyadh Refinery
3.5 1 year
12 6600017366
Mercury Removal Project at Rastanura
Refinery
5.7 1 year
13 37685-pzv
Upgrade Area H,I,J Shutdown - Riyadh
Refinery
14.2 45 days
14 400591/16
SFC - Cooling tower Erection – Riyadh
Refinery
13.2 1 year
15 44371/00
Jet Fuel modification system - Riyadh
Refinery
1.3 1 year
16 JUPC
United Petrol Chemical Company - Jubail -
Manpower, Equipment, Materials supply
15.5 2 years
17
Bemco- Sub
Contract
Two Grades of Gasoline requirements at
Seven Bulk Plants-Sub Contract - Bemco
42.2 2 years
18
Saudi
Electric Co.
Supply and Install the New Crude oil
Pipeline at Tihama Power Plant
2.50 1 year
19
Saudi
Electric Co.
Installation of the Additional Pipeline at
Asir Power Plant
2.2 1 year
20 44618/00
Replacement of Air Compressors at
Riyadh Refinery
4.2 1 year
21 44306/00
Cooling Water system upgrade –Riyadh
Refinery
18.5 2 years
Project Completed: Job Title: Sr. Engineer Subcontract & Procurement
SL
#
Contract # Projects Name & Locations
USD$
Million
Duration
01 6404-SC-029
New LNG Train
Skikda MEI-1:
MEI 1 INSTALLATION FOR NEW
(LNG) TRAIN SKIKDA PROJECT,
ALGERIA.
OWNER: SONATRACH, ALGERIA
COMPANY: KBRII KELLOGG, BROWN &
ROOT INTERNATIONAL
CONTRACTOR: DODSAL ENGINEERING AND
CONSTRUCTION FZE
SCOPE OF WORK: Mechanical, Electrical
and Instrumentation installation work
for New LNG Train and Fractionation
Unit.
250 2 years
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 6 of 11
7. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
BREAK UP OF WORKS- DISCIPLINE
WISE
Piping 69.5%
Equipments erection 12.0%
Equipment Structures & Grouting 1.4%
E&I 17.1%
SUMMARY OF MAJOR QUANTITIES:
Pipe Spool Erection (22,244Nos.) LM
134,840.00
Pipe Support: MT 1,736
Equipment Erection, Alignment
(14,900Nos.)
Equipment Platform Structure & Grouting MT
238
UG Cabling works (22Km.)
AG Cabling Works (726Km.)
Cable Tray installation (96Km.)
Fiber Optic Cable (4Km.)
Instruments (2,415Nos.)
Project Completed: Job Title: Manager Project Procurement
Sl.# Contract. No. Project Name & Location
USD$
Millions
Duration
02 0042/2010/NR/ZU ZUBAIR OIL FIELD DEVELOPMENT
PROJECT–EPC - PIPE LINES
INSTALLATION:Eni0042/2010/NR/ZU
Lump Sum USD: 250 Millions
Call Off Scope USD: 98 Millions
Additional Scope USD: 150 Millions
OWNER: SOUTH OIL COMPANY
(SOC) IRAQ
COMPANY: ENI IRAQ B.V
CONTRACTOR: (JV) of Sicim SpA –
Drake&Scull international (PJSC) UAE
SCOPE OF WORK: Civil, Mechanical
Electrical and Instrumentation.
EPC of Oil & Water Flow lines, Water
Trunk lines and Oil Transfer lines.
Overall (SOW) construction of 52Nos.
New Oil wells and 20Nos. water wells.
Main Scope of Work:
1.New Oil flow lines 2.3/1 and
Replacement of Existing Oil flow lines
2.3/2
2.New Oil Transfer Pipe line system
3.Installation of New water flow lines
and replacement of existing water flow
lines
498 3 Years
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 7 of 11
8. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
4. Oil and Water wellhead Hook-up
5. Replacement of Existing River water
pipe lines
6. Replacement of existing water
injection trunk lines
7. Oil &Water manifold works
General Requirements:
1. Utility system
2. Mechanical System
3. Electrical system and Cathodic
protections system
4. Instrument and control system
5. Piping system
6. Civil Structural and Architectural
Systems
7. HSC Systems
8. Telecommunication system & IT
9. Surveys and mapping
10. Installation of under /Above
ground flow lines
Based on preliminary assumptions the
diameters and length of oil transfer
network system should be as follows
Line pipes length &Dia.
1. 18” approximately 600KM
2. 24” approximately 400KM
3. 36” approximately 350KM
4. 52” approximately 250KM
Project Current: Job Title: Sr. Manager Procurement & Subcontract
Sl.# Contract. No. Project Name & Location
USD$
Billions
Duration
ICHTHYS PPROJECT ONESHORE LNG
FACILITIES. : BLADIN POINT, DARWIN,
NORTHERN TERRITORY
Project Value (USD $ 54 Billions)
COMPANY: Joint Venture between
INPEX group companies (the
Operator), major partner TOTAL group
companies and the Australian
subsidiaries of Tokyo Gas, Osaka Gas,
Chubu Electric Power and Toho Gas
CONTRACTOR: JKC Australia LNG
Pty Ltd (JKC). : Joint venture comprises
JGC Corporation, KBR and Chiyoda
Corporation
Scope of Work: Partial Supply and
construction of Onshore LNG Facilities with
Engineering, Procurement (EPC) contract.
Responsibilities:
B$12.87 5 Years
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 8 of 11
9. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
Lead and manage full Procurement &
Subcontract activities of EPC Project.
Key interactions (internally, externally)
Internally: Project Managers,
Engineering, Construction, Legal, Cost
Controllers, Finance and Accounting
Externally: Clients, Vendors and
Consultants
MAIN ACCOUNTABILITIES
1.Developes the procurement plan,
procedures and documentations in
accordance to the Project requirements.
2.Ensuring the project objectives, scope
and plan are well defined and
understood by the procurement team.
3. Planning, organizing and managing
the staffing requirements to execute the
project procurement activities
4. Ensuring that the procurement team
follows the proper procurement
procedures and that the highest ethical
standards are in full effect for
procurement activities.
5.Determining the best procurement
strategies to maximise Project success
and mitigate any potential risk
6.Managing the procurement budget
and ensuring the targeted objectives are
achieved. In this respect, to lead the
negotiations on all critical and high
value orders with vendors to achieve
7.Managing the procurement progress
and efficiency to be in line with Project
targets.
8.Ensuring all equipment delivery
targets is met and actively resolving
disputes with vendors to achieve win-
win situation.
(EPC) Subcontractors Associated with
JKC Contract Scope:
1.John Holland Territorial: – Civil Works
2. Laing O’ Rourke Australia Pty Ltd:-
Construction accommodation, complete
Village for 3,500 occupant ( EPC)
3. Leighton Contractors Pty Ltd:-
Design , Engineering , construction ,
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 9 of 11
10. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
supply, testing and commissioning of
various temporary site buildings.
4. KentZ:- Telecommunication system
for the various temporary facilities EPC
subcontract including commissioning
5. Bam Clough: (EPC) construction of
two separate Vessel Loading out-
berths one for LNG carriers & other for
LPG/Condensate Carriers.
6. Chzm Hill UG (JV):- EPC for power
supply and construction of new power
plant including commissioning,490MW
7. Kawasaki Heavy Industries Ltd.:-
EPC contract for construction of
Cryogenic tanks. Liquefied Natural Gas
(LNG) storage 2Nos. each with
networking capacity 165,000 m3,
Propane storage tank 1No. capacity
85,000 m3 and Butane storage tank
1No. capacity of 60,000m3.
8. AEC Environmental Pty Ltd.:-
Subcontract for complete
environmental monitoring program with
all required provision of Monthly ,
quarterly and annual reports,
9. Ess Larrakia Pty. Ltd:- Village
management and accommodation
services including security,
janitorial ,laundry and housekeeping
services.
10. Falck Australia:- temporary medical
service at both the construction site and
accommodations village housing up to
3500 residents.
11. Mommoet Australia Pty Ltd.:
Transportation and field erection of
equipment and materials.
12. CBI Constructions:- EPC contract
for the construction of Tanks as below
Tank type Capacity Nos. Service materials
Floating roof 66,359m3 2 Condensate CS
Floating roof 4,995m3 1 Condensate CS
Cone-Roof 24,223m3 1 Fire water CS
Cone-Roof 24,223m3 1 Service water CS
Cone-Roof 234m3 1 Drinking water CS
Cone-Roof 211m3 1 Diesel CS
Cone-Roof 197m3 1 Irrigation water Cs
Cone-Roof 104m3 1 Fresh water CS
Cone-Roof 50m3 1 Diesel CS
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 10 of 11
11. CURRICULUM VITAE
Name: C. Mathew India /Australia Tel: + 61470646855
Qualification: B. Tech/B.E. (Mechanical) with First Class1995 – UAE Council Registered,
Present Location: Australia: cjmathewtmmathew@yahoo.com : cjmathew2001@yahoo.com
Permanent Resident in Australia.
_____________________________________________________________
Cone-Roof 11m3 2 Acid Gas A516
Dome-Roof 2,533m3 2 D Mineral Water C
Dome-Roof 2,518m3 1 Solvent makeup
Dome-Roof 2,518m3 1 Wash Water CS
Dome-Roof 1,846m3 1 Heating M CS
Sphere 2,527m3 1 Propane A537/A516
REPORTING LINES AND INTERACTIONS:
I. Hierarchically reporting
to: Procurement Department
Manager/Director
II. Operationally reports to: Project
Director/ Manager
III. Directly supervising: Project
Procurement and Subcontract Team.
PERSONAL DATA
Name: Mathew Chacko Nationality: Indian
Job Title: Procurement Manager Years with Company: 22+ years
EDUCATION
Type of Schooling/Training Type of Degree/Certification
Graduate College & Year:
1995: (First Class)
Anna Technological University
– Raipur - India
B.E. Bachelors Degree in
Mechanical Engineering
Undergraduate and
Graduate College:
Kerala University Trivandrum
- India
Pre Degree and Degree in
(Mathematics)
Citizenship: INDIA Age: 50 Birth date: 12.04.1968
Gender. : MALE Height: 5’ 7” Weight: 78
Religion, : CHRISTIAN Marital Status: MARRIED Passport No.: S-4703404
ADDITIONAL QUALIFICATIONS:
Extensive work experiences in the actual application of Computer Scheduling and
Engineering programs like:
Primavera Project Planner
Microsoft Projects for Windows
Microsoft Excel for Windows
Microsoft Word for Windows
Microsoft Access for Windows
Other Windows Applications
ERP, SAP and Oracle
Declaration:
I hereby declare that the information given here above is true to the best of my knowledge.
Signature
Permanent Address: House #19, Finch Crescent, Post Code 2320 – Newcastle (NSW) Australia
Page 11 of 11