All about carpentry lesson for Grade 7

1. MODULE 1

2. CARPENTRY
MODULE 1 –
Identifying Materials
for a Task

3. WHAT DO YOU THINK ARE THE TOOLS AND
MATERIALS USED TO BUILD THIS HOUSE?

4. 1.Describe tools and materials
used in carpentry and,
2. Prepare tools and materials
for a task. (TLE_IACP7/8UT-0a-1).
LEARNING
OBJECTIVES:

5. WHAT IS CARPENTRY?
 is the skill of
creating furniture or
other objects from
wood using specialist
carpentry tools and
techniques.

6. WHAT IS CARPENTRY?

10. MATERIALS IN CARPENTRY

11. MATERIALS IN CARPENTRY
2. NAILS - made
of metal used
for fastening
woods.

12. MATERIALS IN CARPENTRY
and length.

13. MATERIALS IN CARPENTRY
with zinc

14. MATERIALS IN CARPENTRY
5. CORRUGATED
GALVANIZED IRON
SHEET – it is a
steel sheet used
for roofing.

15. MATERIALS IN CARPENTRY
6. STEEL
REINFORCEMENT
BAR- used to reinforce
the strength of
construction works

16. MATERIALS IN CARPENTRY
7. CEMENT - a
powdered substance
which when mixed
with water acts as
binder of aggregate.

17. MATERIALS IN CARPENTRY
8. SAND - fine
gritty, substance
found in the shore
and desert.

18. MATERIALS IN CARPENTRY
9. WATER -
added in the
mixture of
cement and
aggregate.

19. MATERIALS IN CARPENTRY
10. GRAVEL -
coarse aggregate
of any hard-inert
material mixed
with cement to
form a concrete

20. MATERIALS IN CARPENTRY
11. PLYWOOD –
thin cross
laminated sheet
of wood.

21. COMMON CARPENTRY TOOLS

22. COMMON CARPENTRY TOOLS

23. COMMON CARPENTRY TOOLS
MEASURING TOOLS TESTING TOOLS
EDGE-CUTING
TOOLS
LINING TOOLS
TOOTHED CUTTING
TOOLS
BORING TOOLS MISCELLANEOUS
TOOLS
DRIVING TOOLS
HOLDING TOOLS

24. GROUP PERFORMANCE TASK
GROUP 1-Waling2x
MEASURING TOOLS
GROUP 2-Waling2x
TESTING TOOLS
GROUP 2-
Sampaguita
EDGE-CUTTING
TOOLS
GROUP 1-Sampaguita
LINING TOOLS
GROUP 3-Waling2x
TOOTHED CUTTING
TOOLS
GROUP 3-
Sampaguita DRIVING
TOOLS

25. GROUP PERFORMANCE TASK
GROUP 4 -
Sampaguita
BORING TOOLS
GROUP 5-
Waling2x
MISCELLANEOUS
TOOLS
GROUP 4-Waling2x
HOLDING TOOLS
GROUP 5-
Sampaguita
EQUIPMENT/
MACHINES

26. DIRECTION:
1.List down the different tools
assigned in your group.
2.Cut-out some pictures of the
different tools and paste it on
the manila paper.
3. You are given at least 15
minutes to do your assigned
task.
4.Assigned group reporter/s to
present the output of your
group.

27. THANK YOU AND
HAVE A
WONDERFUL DAY!
GOD BLESS EVERYONE!