8447779800, Low rate Call girls in Uttam Nagar Delhi NCR
Nabeya eron machine precision vise
1. Japan’s Number 1 – Precision Machine Vise
Nabeya – Established in 1560
ERON Brand Machine Vise Popular Since 1940
www.miyakawa.co.in
2. NABEYA – ERON
Most Trsuted Brand in Precision Machine Vises
World Popular ERON Brand since 1940
Millions of ERON brand Precision Vises in
Operation Globally. Top Precision!
Available in Mechanical, Hydraulic and
Mechanical Multiplier Type models
Almost all Japanese Machine Tool
Manufacturers recommend ERON brand
Widely used in Automotive, Aerospace, Die &
Mould Manufacturing, Tool Room, Various
Engineering Applications.
www.miyakawa.co.in
4. Machine Vise Features
High Rigidity – High Accuracy
User-friendly Design with many Practical & Useful Features
Wider Jaw Opening
One Piece Construction
Construction resist bending stress
Suitable for Various Workpieces
Deeper Jaws
Offers versatile applications when used with
Work stops and support elements
High Rigidity
Chips Cover
Construction resist bending stress
Protects main screw
against chips
Sliding Face
Flame hardened to reduce wear and to
maintaing accuracies for many years
High Rigidity Ductile Cast Iron
Solid Ductile Cast Iron design for manufacturoing
precision parts.
www.miyakawa.co.in
5. Machine Vise Features
Mechanical (Manual Type)
Adjust the clamping force with a torque wrench.
Minimize the floating or deformation of small
workpieces by adjusting the clamping force.
Hydraulic Type
Realize high clamping force (3 ton) by small torque.
Hydraulic Clamping feature applications
Mechanical Force Multiplier
High clamping force (3-4 tons) is available after
1 turn of crank shaft.
www.miyakawa.co.in
6. Features: One Piece Casting Body & Stationary Jaw
Single piece casting design with Stationary jaw does not allow easy
tilting of Workpiece during clamping. The stationary jaw which is a
datum surface is important for precision machining.
One Piece Casting
Not easy to tilt
Clamping Force: 3 tons
2-Piece Construction
Easy to tilt
Clamping Force: 3 tons
Fixed screws for stationary jaw
One Piece Casting
Due to one piece casting,
the stationary jaw is solid structure.
Therefore, datum surface is not easy to tilt.
www.miyakawa.co.in
2-Piece Construction
The stationary jaw is fixed by screws.
Therefore it may be easy to tilt when
clamping .
7. Features: Special Jaw Plates & Additional Machining
For Irregular shaped workpieces
For Thin Plates
Machine vises are available for various shaped workpieces.
Round, Irregular shaped parts cast iron and steel parts can be clamped easily
with special jaw plates or additional machining.
Additional machining with jig fixtures
www.miyakawa.co.in
Additional machining with support parts
8. Most of Japanese M/C Manufacturers Recommend NABEYA
www.miyakawa.co.in