At Dekro Paints we understand that successfully completing building refurbishment projects requires detailed specifications, reliable contractors, and proper supervision. The document discusses Dekro Paints' ability to assist with these needs by offering quality products and services such as detailed commercial specifications, property diagnostics, project monitoring, quality control and site inspections, and after sales service. It also provides information on Hydrolock, a rapid curing, water based primer suitable for damp surfaces and previously painted surfaces. The newsletter section notes that Dekro's technical staff can inspect sites and provide detailed specifications and monitoring reports during projects.
1. Issue 10 – January 2015
Detailed Commercial Specifications
Property Diagnostics
Project Monitoring
Quality control and site inspections
Product education and
development
Cost effective maintenance
After sales service
Decorative and industrial coatings
Product Training
Application Training
At Dekro Paints we understand that in order to successfully
complete a building refurbishment project you require
detailed specifications, good reliable contractors and proper
supervision and monitoring. We would like to assist you with
your next scheduled redecoration by offering you our quality
products and services.
Hydrolock is a rapid curing, water based primer consisting of two
components; a pre-reacted epoxy resin dispersed in water
(Part A), and a waterborne modified polyamine solution (Part B).
In its wet mixed state, it is milky green and slightly viscous.
Hydrolock is suitable for use on most sound and eroded building
surfaces where both a penetrative and surface-lying effect is
needed. Substrates include concrete (including damp and
partially cured cementitious renders, screeds and mortars, bituminous surfaces (eg asphalt), roofing felts,
insulation foams, wooden protrusions, previously painted surfaces, glass reinforced polyester and many
existing Hygiene solution membranes prior to re-coating. The product’s rapid curing properties allow faster
contract completion and consequent savings on site/labour costs. Furthermore, because the epoxy
component is pre-reacted, it constitutes the lowest hazard form of epoxy systems currently available.
Newsletter
Our Technical staff will
conduct on-site
inspections to ascertain
the condition of the
substrate and draft a
detailed specification that
will reference all structural and waterproofing repairs.
Once the projects commences we will
monitor the preparation and application of
our products and issue site reports on a bi-
weekly basis. Our reports includes:
Moisture readings, adhesion tests, salt
contamination tests and dry film thickness
readings.
Changing the colour of your building is
always an emotional decision. We can
assist with colour presentations and
samples to make this decision easier.
2. www.dekro.co.za TOLL FREE HELP LINE: 0800 222 423 info@dekro.co.za 24 Fabriek Street Kuils River 7580
Most property has issues with mould growth on their
bathroom ceilings and walls. This is mostly due to
poor ventilation and the moist conditions that are a
perfect breeding ground for fungal growth. To
eradicate fungal growth follow these easy steps:
Wash affected areas with Hydrowash
Anti-fungicidal solution and leave for
24 hours to kill the spores.
Clean area with fresh water and allow
sufficient drying time before
attempting to re-coat these areas.
Apply two coats of Dekro
Mediguard allowing 4 - 6 hours
drying time in between coats.
Floor Coatings / Epoxy Coatings / Wood
Preservatives / Sealers
Hygiene Coatings / Food Grade Coatings / Thales
Approved Coatings