Clamps

1. Clamps are used to mount material
handling hoses and rubber lined steel
pipes in the mineral processing industry,
coal refinement plants, power plants and
cement factories.
Product description
Clamps are made of galvanized steel.
Area of use
Steel clamps are used to fix hoses or pipes to the support
beam. It is particularly important for the hose to be fixed to
the supporting beam at bends and wherever long lengths
of hose are used.
Characteristics
Clamping should be done every 1000 to 1500 mm on
straight lines, both vertical and horizontal. In curved sections,
tighter clamping is recommended.
ENClamps
Metso Slurry Handling Solutions

2. For contact with your local Metso representative, visit
www.metso.com/pumps
Subject to alteration without prior notice.
BrochureNo.54-09-11-SBL/Ersmark/English ©2013.04Metso
Technical description
Clamps are made of galvanized steel and correspond to SSG
7075 standard.
Installation
Clamps are available in sizes matching the size of hoses and
pipes, see table below left. The following spacing between
each clamp is recommended:
Clamps
For rubber lined steel pipes use Rubber Strip (SH-489245) as
spacer between clamp and steel pipe.
Rubber Strip (SH-489245)
To clamp rubber lined steel pipes use Rubber Strip (SH-489245)
as spacer. Needed length for each clamp, see table below right.
Hose / Pipe ID Spacing Hose Distance to pipe end
mm / inch mm / ft mm / ft
51-127 / 2-5 1000 / 3 300 / 1
152-355 / 6-14 1250 / 4 500 / 1.5
405-610 / 16-24 1500 / 5 1000 / 3
Part no.
Hose / Pipe ID Clamp Width Total Weight Screw Dim.
mm inch mm inch kg lbs Metric inch
SH-596551 51 2 40 1.6 0.5 1.1 M10x40 3/8 x 1.6"
SH-596577 76 3 50 2 1.4 3.1 M10x40 3/8 x 1.6"
SH-575043 102 4 50 2 1.6 3.5 M16x60 5/8 x 2.4"
SH-575050 127 5 50 2 1.8 4 M16x60 5/8 x 2.4"
SH-575068 152 6 50 2 2 4.4 M16x80 5/8 x 2.4"
SH-575076 204 8 60 2.4 4.2 9.3 M20x80 3/4 x 3.2"
SH-575084 254 10 60 2.4 4.9 10.8 M20x80 3/4 x 3.2"
SH-575092 305 12 60 2.4 5.5 12.1 M20x80 3/4 x 3.2"
SH-602904 355 14 70 2.8 9.3 20.5 M20x80 3/4 x 3.2"
SH-602896 405 16 70 2.8 10.1 22.3 M20x80 3/4 x 3.2"
SH-602888 457 18 70 2.8 11 24.3 M20x80 3/4 x 3.2"
SH-602870 508 20 100 4 20.2 44.5 M24x100 1 x 4"
SH-602862 610 24 100 4 23.4 51.6 M24x100 1 x 4"
Pipe ID Length
mm inch mm inch
51 2 250 10
76 3 350 14
102 4 450 18
127 5 500 20
152 6 650 26
204 8 800 32
254 10 1000 39
305 12 1200 47
355 14 1300 51
405 16 1500 59
457 18 1600 63
508 20 2x1800 2 x 71
610 24 2x2100 2 x 83