QS Metrology Private Limited, New Delhi

PAINTCHECK
PAINT THICKNESS
GAUGE
PaintCheck enables quick, non-destructive and
accurate paint thickness measurement on steel, iron,
aluminium and other non-ferrous metals
Area of application and use
PaintCheck does not only measure the paint thick-
ness, but also gives you valuable information about
the coating structure, e. g. top coatings or sub-fillings.
If the measured thickness exceeds that of a standard
paint coating then this would either indicate the
presence of filler material used for repair work or a
repainted area.
Measurement is made possible by using two field-
proven methods in coating thickness measurement:
the magnetic and the eddy current methods (DIN
EN 2178 and 2360). Both of these offer the highest
degree of precision even with the thinnest paint
coatings, on steel as well as on non-ferrous metals
such as aluminium. PaintCheck uses both methods
which are automatically selected by the gauge
when positioning the probe.
This gauge offers unbeatable quickness, simplicity
and versatility.
Advantages at a glance
+ Easy single key operation –
just switch on and measure
+ Quick and accurate measurements
+ Large measurement range up to 3000 µm
(PaintCheck plus) or 2000 µm (PaintCheck)
+ Measurements on level or slightly curved surfaces
+ No calibration necessary
+ Suitable for measurements on iron/steel and
non-ferrous metals (e. g. aluminium)
+ Automatic base material recognition
+ Integrated probe for measurement on smooth,
painted areas
+ Four digit alphanumeric readout
+ Large contact area for reliable positioning
+ Acoustic signal with measurement recording
+ Switchable: µm/mils
+ Automatic switch-off function
www.phynix.com
BY EXPERTS FOR EXPERTS
COATING THICKNESS MEASUREMENT · CROSS HATCH CUTTING
+ Easy handling
+ Compact device
+ Three versions

PHYNIX GMBH & CO. KG
SIEMENSSTR. 14 · 41469 NEUSS · GERMANY
FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28
Technical data PaintCheck plus FN PaintCheck plus F PaintCheck FN
Range 0 – 3,000 µm 0 – 3,000 µm 0 – 2,000 µm
Base material Iron/Steel and non-ferrous metals Iron/Steel Iron/Steel and non-ferrous metals
Accuracy ± (3 μm + 5 % of reading) ± (3 μm + 5 % of reading) ± (3 μm + 5 % of reading)
Resolution 0 – 1,000 μm: 1 μm
1,000 – 2,500 μm: 2 μm
2,500 – 3,000 μm: 5 μm
0 – 1,000 μm: 1 μm
1,000 – 2,500 μm: 2 μm
2,500 – 3,000 μm: 5 μm
0 – 1,000 μm: 1 μm
1,000 – 2,000 μm: 2 μm
Display readout 4 digit, alphanumeric, height 8 mm
Calibration not necessary; calibrated at the works
Operating temperature 0 °C up to 60 °C
Surface temperature –15 °C up to 60 °C
Dimensions 110 mm x 50 mm x 25 mm
Weight 90 g including batteries
Protection class IP 52 (protection against dust and dripping water)
Standards DIN, ISO, ASTM, BS
Recommended application Paint coating thickness measurement
Warranty 2 years
PaintCheck is available in three versions:
PaintCheck plus FN: extended range, for measurements on steel, iron, aluminium etc.
PaintCheck plus F: extended range, for measurements on steel and iron
PaintCheck FN: standard range, for measurements on steel, iron, aluminium etc.

All types enable easy, non-destructive measurement of paint coating thickness and offer high resolution with a high degree
of accuracy. Owing to these facts, the PaintCheck family is the ideal tool for car dealers, paint shops and assessors.
Limit Values
Smallest curvature radius for convex surfaces:· · · · · · · · · · · · 25 mm
Smallest curvature radius for concave surfaces: · · · · · · · · · · 50 mm
Smallest operation height: · · · · · · · · · · · · · · · · · · · · · · · · · · 125 mm
Smallest measurement area: · · · · · · · · · · · · · · · · · · 40 mm x 40 mm
Smallest base material thickness – F:· · · · · · · · · · · · · · · · · · · 0.75 mm
Smallest base material thickness – N:· · · · · · · · · · · · · · · · · · 0.25 mm
Standard package:
• Gauge including probe
• Rubber protection sleeve
• 1 foil standard
• Zero standard(s) (steel/aluminium)
• 2 batteries AAA
• Operating manual
• Transport case
PAINTCHECK
www.phynix.com

POCKET-
SURFIX®
X-SERIES
Portable Coating Thickness Measurement Gauge
Area of operation and application
The Pocket-Surfix®
X-Series coating thickness gauges
are portable gauges enabling quick, reliable and
precise coating thickness measurement of varnish,
paints and electroplated coatings on iron/steel or
non-ferrous metals.
The coating thickness gauges are particularly handy
thanks to an integrated probe. The measuring probe
has a highly wear-resistant measuring tip made of car-
bide metal and thus guarantees a very long lifetime.
A plastic foot with large footprint and V-groove ensu-
res vertical positioning on level, cylindrical and curved
surfaces.
The bright LED backlight enables easy reading of
measured values even under difficult conditions. All
Pocket-Surfix®
X-Series devices have a data memory
and can be connected to a PC via a USB 2.0 con
nection.
The integrated probe and the compact size allow
one-hand operation and make the Pocket Surfix®
X
ideal for mobile use in the workshop, production or
inspection areas.
+ Innovative and user-friendly measurement
technology: simply switch on and measure
+ Online statistics for all required parameters
+ Data memory
+ Intuitive menu prompting in a freely selectable
language
+ LED backlight display for easy reading in dark
environments
+ Data-transfer to PC via USB 2.0 connection
+ Pocket-Surfix®
X-FN: automatic detection of base
material (ferrous / non-ferrous)
+ Low probe tip pressure avoids scratches and indents
on sensitive surfaces
+ Incl. data-transfer software PHYNIX.connect
+ Comes with manufacturer’s certificate and a
two year warranty
The gauges of the Pocket-Surfix®
X-series are used in
fields like:
• Electroplating
• Paint shops
• Car industry
• Chemical industry
• Aerospace
• Shipbuilding
www.phynix.com
+ Intuitive menu
navigation
+ LED-Backlight
+ USB 2.0-connection

FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28
Pocket-Surfix®
X is available in three versions:
Pocket-Surfix®
X-FN: for measurements on iron/steel and non-ferrous metals
Pocket-Surfix®
X-F: for measurements on iron/steel
Pocket-Surfix®
X-N: for measurements on non-ferrous metals
Technical data Pocket-Surfix®
X
Method of measurement
F-Mode (magentic-inductive method) for iron and steel
N-Mode (eddy-current method) for non-ferrous metals
Measurement range 0 – 1,500 µm
Accuracy ± (1 µm + 1 % of reading)
Resolution 0.1 µm or < 0.2 % of reading
Display LED-Backlight, 4 digit, alphanumeric, digit height 8 mm
Calibration method
Works calibration, zero and foil calibration
Zero-offset: addition or subtraction of a constant value
Data Memory max. 80 readings
Statistics
Number of readings, mean value, standard deviation,
max. and min. reading
Interface USB 2.0-connection
Operating temperature 0 °C to +60 °C
Surface temperature –15 °C to +60 °C
Weight 90 g, incl. batteries
Delivery Content
• Rubber sleeve
• 2 calibration foils (steel/aluminium)
• 2 batteries AAA
• Data transfer software PYHNIX.connect
• Manufacturer‘s certificate
• Case
Limit values
Smallest curvature radius for convex surfaces · · · · · · · 1.5 mm
Smallest curvature radius for concave surfaces· · · · · · 50 mm
Smallest operation height· · · · · · · · · · · · · · · · · · · · · · 125 mm
Smallest measurement area· · · · · · · · · · · · · · 10 mm x 10 mm
Smallest base material thickness – F· · · · · · · · · · · · · · · 0.2 mm
Smallest base material thickness – N· · · · · · · · · · · · · · · · 50 µm
POCKET-SURFIX®
X
www.phynix.com

www.phynix.com
PHYNIX PROBES
THE HEART OF OUR
COATING THICKNESS GAUGES

www.phynix.com
PROBE OVERVIEW
The various measurement tasks of our customers are
reflected in our comprehensive probe program.
Innovations and ongoing further developments pro-
vide optimal results with high accuracy for a wide
range of industrial applications.
To determine the optimal probe the following aspects
need to be considered:
+ Material combination of layer and base material
+ Thickness of the layer and of the base material
+ Dimensions of the measurement object
+ Surface texture of the object
Your application decides on the optimal
combination of probe and gauge.
+ F-type probes (ferromagnetic)
Magnetic-inductive method (according to DIN EN
ISO 2808/2178 and ASTM B499) on ferromagnetic
base materials, such as iron and steel.
+ N-type probes (non-ferromagnetic)
Eddy current method (according to DIN EN ISO
2808/2360 and ASTM D7091) on non-magnetic,
metal based materials, such as aluminium, zinc,
copper, etc.
+ FN-type probes (combination probes)
Suitable for magnetic and non-magnetic base
materials such as iron / steel and non-ferrous
metals. The appropriate measurement method
for each base material is automatically activated
and is indicated in the display.
hot measurement foot high temperature foot
S TA N D A R D P R O B E S
Technical data FN 0.2 FN 1.5 F 1.5 N 1.5
Measurement range
0–200 µm
on steel/iron and non-ferr. metals
0–1,500 µm
on steel/iron and non-ferr. metals
0–1,500 µm
on steel/iron
0–1,500 µm
on non-ferrous metals
Accuracy
with works calibration
+/– 2.5 µm or 2.5 %
(whichever is greater)
+/– 3 µm or 3 %
with zero calibration +/– (0.7 µm + 1.5 %) +/– (1 µm + 2 %)
with foil calibration +/– (0.7 µm + 1.0 %) +/– (1 µm + 1 %)
Acid-resistant pole-tip — optional — optional
Temperature range 0 °C to 60 °C
Dimensions Ø 14 mm x 83 mm
Weight appr. 70 g
Hot measurement foot –15 °C to 150 °C
High temperature foot — –15 °C to 300 °C (0 bis 1,000 µm)

Technical data
FN 1.5R
F 1.5R
FN 1.5/90°
(for pipes and tubes)
FN 3.5
F 3.5
F 10 F 30
Measurement range 0–1,500 µm 0–1,500 µm
0–3,500 µm (F)
0–3,000 µm (N)
0–10 mm 0–30 mm
Accuracy
with works calibration
+/– 3 µm or 3 %
+/– 3 µm or 3 %
+/– 5 µm or 3 %
+/– 10 µm or 3 %
n. a.
with zero calibration +/– (1 µm + 2 %) +/– (1 µm + 2 %) +/– (2 µm + 2 %) +/– (5 µm + 2 %) +/– (10 µm + 4 %)
with foil calibration +/– (1 µm + 1 %) +/– (1 µm + 1 %) +/– (2 µm + 1 %) +/– (3 µm + 1 %) +/– (10 µm + 2 %)
Temperature range 0 °C to 60 °C
Dimensions Ø 16 mm x 24 mm x 62 mm 8 mm x 12 mm x 180 mm Ø 25 mm x 47 mm Ø 25 mm x 47 mm Ø 75 mm x 55 mm
Weight appr. 90 g appr. 85 g appr. 105 g appr. 85 g appr. 400 g
Technical data F 10-1 F 10-2 F 10-3 F 10-CP F 30-T F 30-C
Application area
———————————————————————— tyres ———————————————————————— conveyor belts
side wall tread inside bead sidewall thickness tread outside
Measurement range 0–6.5 mm 0–10 mm 0–30 mm 0–20 mm
Accuracy
with works calibration n. a.
with zero calibration +/– (0.1 mm + 5 %) +/– (0.05 mm + 5 %) +/– (0.2 mm + 5 %) +/– (0.2 mm + 5 %)
with foil calibration +/– (0.1 mm + 3 %) +/– (0.05 mm + 3 %) +/– (0.2 mm + 3 %) +/– (0.2 mm + 3 %)
Temperature range 0 °C bis 60 °C
Dimensions Ø 25 mm x 47 mm Ø 75 mm x 55 mm
Weight appr. 85 g appr. 400 g
S P E C I A L P R O B E S
P R O B E S F O R M E A S U R E M E N T S O N S T E E L M E S H

FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28
www.phynix.com
CHARACTERISTICS
OF PHYNIX PROBES
+ Durability
PHYNIX probes are extremely robust and resistant
to wear and have a nearly unlimited lifespan.
+ Made in Germany
All probes are designed and manufactured in
our production site in Neuss under the highest
quality standards.
+ Curvature compensation
The different calibration methods allow
measurement on highly curved surfaces by
a simple calibration procedure.
+ Works calibration
Each probe passes through an individual, internal
calibration to ensure maximum accuracy.
+ Switch on and measure
In most cases, a measurement without
additional calibration is possible.
PHYNIX probes are manufactured under the
highest quality standards in Germany only.
Depending on the application, a probe must meet
very specific requirements in order to achieve an
optimal result with high accuracy.
That‘s why we offer probes for different base ma-
terials such as iron/steel and non-ferrous metals,
different layer thicknesses, different measurement
locations or measuring area sizes.
For each measurement application, the optimal
probe! Our engineers can also develop an optimal
probe for your specific needs – contact us!

www.phynix.com
SURFIX®
EASY
SERIES
Handy coating thickness gauge:
it could not be easier!
The gauges are designed for rough operational conditions
at the testing site as well as for use in laboratories. The pro-
duction, made under strict international quality standards,
guarantees many years of reliable operational use.
The Surfix®
easy series is mainly used in the following fields:
• Paint shops
• Paint coatings and powder coating technology
• Automotive assessment and in car workshops
• Steel construction, car manufacturing and ship building
• Incoming goods department
• During the production process
• Final inspection and quality assurance
• Laboratories
All measurement probes belonging to the Surfix®
easy se-
ries have carbide tips which are highly resistive to wear, this
means that there is an almost unlimited life duration. The
plastic probe foot is designed with a V-groove thus enab-
ling stable vertical positioning on level, cylindrical or curved
surfaces.
The Surfix®
easy series is the ideal tool for users who require
to measure coating thicknesses the easy way and who are
not willing to renounce statistical evaluation, a wear-free
measurement tip and the high production quality offered
in a “Made in Germany” product.
+ Innovative and user-friendly measure-
ment technology: just switch on and measure
+ Measurement on level, rough and curved surfaces
+ F-types for measurements on iron/steel
+ FN combination gauges for measurements
on iron/steel and non-ferrous metals
+ Automatic recognition of the base material
with FN combination gauges
+ Easy detection of zinc layers under paint coatings
with FN combination gauges
+ Calibration-free measurement
+ Online statistics (n, ¯x, s, min, max)
+ Large attachment area for reliable positioning
+ Acoustic signal when a reading is recorded
+ Switchable µm/mils
+ Manufacturer‘s certificate
+ With integrated probe or external probe
+ 2 year warranty

FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28www.phynix.com
SURFIX®
EASY
Standard package
• 1 standard foil
• 2 batteries AAA
• Case, optional: soft bag
Limit values
Smallest curvature radius for convex surfaces · · · · · · · · · · · · · · · · · · 5 mm
Smallest curvature radius for concave surfaces· · · · · · · · · · · · · · · · · 50 mm
Smallest operation height· · · · Surfix®
easy I: 125 mm | Surfix®
easy E: 50 mm
Smallest measurement area· · · · · · · · · · · · · · · · · · · · · · · · 10 mm x 10 mm
Smallest base material thickness – F· · · · · · · · · · · · · · · · · · · · · · · · · 0.5 mm
Smallest base material thickness – N· · · · · · · · · · · · · · · · · · · · · · · · · · 50 µm
Technical data Surfix®
easy I-FN / I-F Surfix®
easy E-FN / E-F
Version Integrated probe External, fixed probe
Measurement range iron/steel 0 – 3,500 µm
Meas. range non-ferrous metals 0 – 3,000 µm
Accuracy ± 2 µm or 2 % of reading
Resolution 0 – 1,000 µm: 1 µm | 1,000 – 2,500 µm: 2 µm | 2,500 – 3,500 µm: 5 µm
Carbide metal tip yes yes
Calibration works calibration, zero calibration
Statistics mean value, standard deviation, minimum, maximum
Display 4 digit, alphanumeric, height 10 mm
Operating temperature 0 °C to + 60 °C
Surface temperature –15 °C to + 60 °C
Dimensions of gauge 110 mm x 50 mm x 25 mm
Dimensions of probe Integrated Ø 24 mm x 45 mm
Weight 90 g incl. batteries 140 g incl. batteries
Recommended applications Compact gauge For positions difficult to access
Warranty 2 years
The Surfix®
easy is available in two versions:
Surfix®
easy I: a compact gauge with integrated probe which fits in nearly every pocket
Surfix®
easy E: a gauge with external, fixed probe enabling measurement to be made in
difficult-to-access positions
All versions enable easy and precise coating thickness measurement:
Combination gauges FN on steel and non-ferrous metals, the F-gauges used solely on steel.

www.phynix.com
SURFIX®
EASY
X-SERIES
Handy coating thickness gauge:
it could not be easier!
The gauges are designed for rough operational conditions
at the testing site as well as for use in laboratories. The pro-
duction, made under strict international quality standards,
guarantees many years of reliable operational use.
The Surfix®
easy X-series is mainly used in the following
fields:
• Paint shops
• Paint coatings and powder coating technology
• Automotive assessment and in car workshops
• Steel construction, car manufacturing and ship building
• Incoming goods department
• During the production process
• Final inspection and quality assurance
• Laboratories
All measurement probes belonging to the Surfix®
easy X-
series have carbide tips which are highly resistive to wear,
this means that there is an almost unlimited life duration.
The plastic probe foot is designed with a V-groove thus
enabling stable vertical positioning on level, cylindrical or
curved surfaces.
The Surfix®
easy X-series is the ideal tool for users who require
to measure coating thicknesses the easy way and who are
not willing to renounce statistical evaluation, a wear-free
measurement tip and the high production quality offered in
a “Made in Germany” product.
+ Innovative and user-friendly technology:
just switch on and measure
+ High measuring accuracy
+ Carbide measuring pole
+ Measure on flat, rough and curved surfaces
+ Calibration-free measuring
+ Calibration function for demanding
measurement applications
+ FN combination probes for measurements on iron/
steel and non-ferrous metals
+ F type probes for measurements on iron/steel
+ Automatic recognition of the base material with
the FN combination probes
+ Backlit display for easy viewing in dark environments
+ Easy detection of zinc layers under coating with
the FN combination units
+ Online statistics (n, x¯, s, min, max)
+ Large probe foot for stable positioning
+ Acoustic signal when a reading is recorded
+ Switchable unit μm/mils
+ With integrated or external probe
+ 2 years warranty
+ Easy-to-use
+ Backlit display
+ Statistical functions

SURFIX®
EASY X
The Surfix®
easy X is available in two versions:
Surfix®
easy X I: a compact gauge with integrated probe which fits in
nearly every pocket
Surfix®
easy X E: a gauge with external, fixed probe enabling measurement
to be made in difficult-to-access positions
All versions enable easy and precise coating thickness measurement:
Combination gauges FN on steel and non-ferrous metals, the F-gauges
used solely on steel.
easy X I-FN / I-F Surfix®
easy X E-FN / E-F
Version Integrated probe External, fixed probe
Measurement range iron/steel 0 – 3,500 µm
Meas. range non-ferrous metals 0 – 3,000 µm
Accuracy ± 2 µm or 2 % of reading
Resolution 0 – 1,000 µm: 1 µm | 1,000 – 2,500 µm: 2 µm | 2,500 – 3,500 µm: 5 µm
Carbide metal tip yes yes
Calibration works calibration, zero calibration
Statistics number, mean value, standard deviation, minimum, maximum
Display backlit, 4 digit, alphanumeric, height 8 mm
Surface temperature –15 °C to + 60 °C
Dimensions of gauge 110 mm x 50 mm x 25 mm
Dimensions of probe Integrated Ø 24 mm x 45 mm
Weight 90 g incl. batteries 140 g incl. batteries
Recommended applications Compact gauge For positions difficult to access
Warranty 2 years
Scope of delivery
• 1 standard foil
• 2 batteries AAA
• Operating manual (GER, EN, FR, CHIN)
• Case
Limit values
Smallest curvature radius for convex surfaces · · · · · · · · · · · · · · · · · · 5 mm
Smallest curvature radius for concave surfaces· · · · · · · · · · · · · · · · · 50 mm
Smallest operation height· · · · Surfix®
easy I: 125 mm | Surfix®
easy E: 50 mm
Smallest measurement area· · · · · · · · · · · · · · · · · · · · · · · · 10 mm x 10 mm
Smallest base material thickness – F· · · · · · · · · · · · · · · · · · · · · · · · · 0.5 mm
Smallest base material thickness – N· · · · · · · · · · · · · · · · · · · · · · · · · · 50 µm

SURFIX®
SERIES
Quick, reliable and precise coating thickness
measurement of varnish, paint and electroplated as well
as anodized coatings on iron/steel and non-ferrous metals
Our gauge Surfix®
Pro S can be connected to dif-
ferent probes suited for numerous coating thickness
measurements.
It has a large memory for measurement readings,
statistic functions, infrared data transfer and five
different methods of calibration.
Our universal gauge Surfix®
S also has a wide range
of applications owing to the many different probes
which can be connected. Its capabilities in the field
of data transfer, the easy operation and the high
accuracy serve to make it a universal measurement
gauge.
Our standard gauge Surfix®
with fixed probe is of
special interest for tasks involving predetermined
measurement applications.
Amongst other tasks, our Surfix®
gauges are used
in the following fields:
• Electroplating
• Paint shops
• Car industry
• Chemical industry
• Aerospace
• Shipbuilding
• Tyre manufacturing industry
+ Measurement technology which is both
innovative and user-friendly
+ Automatic adjustment of the required
measurement mode of operation
+ Large memory for 10,000 measurement readings
(Surfix®
Pro S) resp. 200 measurement readings
(Surfix®
S, Surfix®
E)
+ Management of alphanumeric
file names (Surfix®
Pro S)
+ Online statistics of all required parameters
+ Data transfer via infrared interface
and cable (RS232)
+ Intuitive menu prompting with selectable language
+ Scan mode for continuous measurements
(Surfix®
Pro S)
+ Optional plastic foot for measurements
up to 150 °C or 300 °C
+ 2 years warranty
All our measurement probes are equipped with a
highly wear-free tip made of carbide metal thus
having an almost unlimited life span.
www.phynix.com

FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28
Example of standard package
• 2 calibration foils
• Zero standard(s)
(steel/aluminium)
• 2 batteries AA
• Data transfer software
PHYNIX.connect
• Case
Additional options
• Probes according to PHYNIX delivery program
• Probe guide for precision measurements
on small parts
• Calibration standards
• High temperature probe feet
SURFIX®
SERIES
Surfix®
series is available in six versions:
Surfix®
Pro S / Surfix®
Pro S-CT | Surfix®
S / Surfix®
S basic* | Surfix®
E / Surfix®
E basic*
Due to their exchangeable or fixed probes, Surfix®
gauges enable almost unlimited operational possibilities at constant high precision.
www.phynix.com
Pro S Surfix®
S Surfix®
E
Design Separate, exchangeable probe external, fixed probe
Probes FN 1.5, optional standard probes, angled probes and special probes
(refer to probe brochure)
FN 1.5, F 1.5, N 1.5
Measurement range depending on probe up to 30 mm 0 – 1,500 µm
Accuracy depending on probe up to ± (0.7 µm + 1 % of reading)
Resolution 0.1 µm or < 0.2 % of measurement reading
Carbide metal tip yes yes yes
Calibration works-, one-foil-, two foil-, zero- and
CTC-calibration
works-, zero- and one-foil-calibration
Calibration memory yes — —
Statistics single/block value: n, ¯x, s, min., max.,
Kvar, cp, cpk
Number of measurement readings, mean value, standard deviation,
max and min reading
Memory 10,000 readings max. 200 readings max. 200 readings
Data transfer infrared/cable infrared/cable infrared/cable
Continuous measurement yes — —
Display backlight, 4 digit, alphanumeric, digit height: 10 mm
Surface temperature –15 °C to + 60 °C (standard)
–15 °C to + 150 °C or 300 °C (with optional high-temperature foot)
Display backlight, 4 digit, alphanumeric, digit height: 10 mm
Weight 205 g (including FN probe 1.5 and batteries)
Warranty 2 years
*withoutmemory,statistics,limitvalues,interface,backlight

www.phynix.com
Application area
The outstanding feature of this new PHYNIX gauge is
the brilliant color graphic display with improved text
presentation and allows a variety of different oper-
ating languages. The standard now includes English,
German, French, Italian, Spanish, Turkish, Czech and
Chinese (simple and traditional).
The internal memory was greatly enlarged compared
to the Surfix series and now allows the storage of up to
2,000 measured values. The connection to a computer
is simply via USB 2.0. Cable and data transfer program
PHYNIX.connect is part of the delivery. The latter allows
transfer of readings to all modern Windows systems
and export to Excel.
Two models are available: the Surfix®
SX can be con-
nected to all probes from the PHYNIX probe program.
This ensures the highest possible flexibility which ena-
bles the device to fulfill many different measurement
tasks.
The Surfix®
EX devices with the fixed standard probe
are suitable for applications where the measurement
tasks are clearly defined. It is easy to use and also
more cost efficient compared to the Surfix®
SX with the
high-quality plug-in connection.
Surfix®
SX/EX gauges are used
in the following fields:
+ in the electroplating industry
+ in the painting industry
+ in the automotive industry
+ in the chemical industry
+ in aerospace engineering
+ in shipbuilding
+ in research labs and universities
+ in the workshop
+ for consultants and assessors
Advantages at a glance:
+ Innovative and user-friendly measurement
technology
+ High-resolution color graphics display
+ USB interface
+ Automatic recognition of the base material
+ Data memory for up to 2,000 measured values
+ Online statistics
+ Intuitive menu guidance
+ Measurements on hot surfaces up to 150 °C
or 300 °C (optional)
+ Manufacturer’s test certificate
+ 2 years warranty
SURFIX®
X-SERIES
Modern measuring instruments: graphic display,
PC connection and easy operation, combined with the
proven PHYNIX probes
+ USB interface
+ Large data memory
+ Excel connection

www.phynix.com
SURFIX®
X SERIE
Surfix®
X Series gauges are available as Surfix®
SX and Surfix®
EX
variants: With interchangeable or fixed probes, the Surfix®
X Series
offers the highest precision for almost any application.
• Gauge
• Protective rubber-cover
• Zero plate(s) (steel/aluminium)
• 2 batteries AA
• PHYNIX.connect
transfer software
• USB cable
• Transport case
Additional options
on small parts
• Manufacturer‘s certificate TYP M DIN 55350
SX Surfix®
EX
Specification for connection of exchangeable, separate probes external, fixed probes
Available probes 1.5 mm standard probe (optional acid-resistant)
(FN, F, N)
1.5 mm standard probe for iron/steel
and non-ferrous metals (Surfix®
EX-FN)
1.5 mm rectangular probe (FN, F) 1.5 mm standard probe for iron/steel (Surfix®
EX-F)
1.5 mm/90° tube probe (FN) 1.5 mm standard probe for non-ferrous metals
(Surfix®
EX-N)
0.2 mm precision probe (FN)
3.5 mm rectangular probe with increased
measurement range (FN, F)
10 mm rectangular probe with large
measurement range (F)
(for more details see probe flyer)
Measurement range depending on the probe, up to 30 mm 0 – 1.500 μm
Accuracy depending on the probe +/– (1 μm + 1 % of reading)
up to +/– (0.7 μm + 1 % of reading)
Resolution 0.1 μm or < 0.2 % of reading (with standard probe)
Calibration method works calibration, zero calibration, one-foil calibration; zero-offset
Statistics Number of measured values, mean value, standard deviation, minimum and maximum measured value
Memory max. 2.000 readings
Data transfer USB 2.0
Display high-resolution color display
Surface temperature –15 °C to + 60 °C (standard)
–15 °C to + 150 °C or 300 °C (with optional high temperature feet)
Dimensions gauge 137 mm x 66 mm x 23 mm
Weight 205 g (incl. FN 1.5 probe and batteries)
Warranty 2 years
FON: +49 2137 - 109 78 -0 · FAX: +49 2137 - 109 78 -28

www.phynix.com
Areas of operation and application:
The most striking feature of our top model Surfix®
Pro X
is the high resolution color graphic display. The high-
contrast and bright display allows a reliable reading
of measurements from a distance or in the dark. The
graphic display allows a quick on-site data analysis
directly after the measurement. The intuitive, multilin-
gual user interface prevents operating error without
any need to use the operating manual.
The project „Industry 4.0“ which demands improved
networking of measuring instruments and production
control is supported by the integration of two interfac-
es: Bluetooth 4.0 and USB 2.0. The standard interfaces
help to easily integrate the Surfix®
Pro X in a fully net-
worked production environment.
The gauge also has a very large data memory for
up to 100,000 readings, optional with date, time and
calibration. For easier handling, the readings can be
organized into files with arbitrary file names.
Together with our exchangeable probes the Surfix®
Pro X provides highest precision combined with ease
of use for almost all applications.
All our measurement probes are equipped with a
highly wear-free tip made of carbide metal thus
having an almost unlimited life span.
Surfix®
Pro X gauges are used in
the following fields:
+ Electroplating
+ Paint shops
+ Car industry
+ Chemical industry
+ Aerospace
+ Shipbuilding
+ Tyre manufacturing industry
Advantages at a glance:
+ High resolution color graphic display
+ Graphical data analysis (histogram, trend)
+ Data transfer with USB or Bluetooth 4.0
+ Innovative and user-friendly
measurement technology
+ Automatic adjustment of the required
measurement mode of operation
+ Large data memory for up to 100,000 readings
and up to 1,000 individual calibrations
+ Free choice of filenames
+ Online statistics of all common parameters
+ Intuitive menu navigation in many languages,
e. g. English, French, Chinese, Spanish etc.
+ Scan mode for continuous measurements
+ Optional plastic foot for measurements
up to 150 °C or 300 °C
+ 2 years warranty
SURFIX®
PRO X
Our top model includes many features to meet the
high demands on modern coating thickness gauges
+ Color graphic
display
+ Data memory for
up to 100.000
readings
+ Bluetooth 4.0
and USB

SURFIX®
PRO X
Combined with our exchangeable probes Surfix®
Pro X offers at the same time
highest precision and easy-to-use features for nearly all possible applications.
Pro X
Design separate, exchangeable probe
Probes FN 1.5
optional all standard probes, angled probes and special probes (see separate brochure)
Measurement range depending on probe up to 30 mm
Accuracy depending on probe up to +/– (0.7 µm + 1 % of reading)
Resolution 0.1 µm or < 0.2 % of reading
Carbide metal tip yes
Calibration methods works calibration, zero, one-foil, two-foil and CTC-calibration
Statistics Single-value/block-value statistics: n, ¯x, s, min., max., Kvar, cp, cpk
Graphical data analysis Chart (Trend), Histogram
Memory up to 100,000 readings in direct- and data-memory; free choice file names
Calibration memory up to 1,000 individual calibrations
Data transfer USB 2.0/Bluetooth 4.0
Continuous measurement 3 readings per second
Display high-resolution colour display
Surface temperature –15 °C up to + 60 °C (standard)
–15 °C up to + 150 °C or 300 °C (with optional high temperature foot)
Weight 223 g (incl. FN probe 1.5 and batteries), 148 g (gauge only)
Warranty 2 years
Menu multi-language menu-stucture (English, German, French, Chinese …)
• Gauge incl. probe
• Protective rubber-cover
• Zero standard(s)
(steel/aluminium)
• 2 batteries AA
• PHYNIX.connect transfer software
• Case
Additional options
on small parts
• High temperature probe feet

QS Metrology Private Limited, New Delhi

Recommended

Recommended

More Related Content

What's hot

What's hot (16)

Similar to QS Metrology Private Limited, New Delhi

Similar to QS Metrology Private Limited, New Delhi (20)

More from IndiaMART InterMESH Limited

More from IndiaMART InterMESH Limited (20)

Recently uploaded

Recently uploaded (20)

QS Metrology Private Limited, New Delhi