Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
Hassan mohamed resume 2016 aug (1)
1. 1
Hassan Mohamed (BSc)
E L E C T R I C A L A N D E L E C T R O N I C E N G I N E E R
O B J E C T I V E S
A highly qualified, dedicated and disciplined electrical engineer seeking to contribute and grow
within a dynamic, progressive and innovative organization. Strong understanding of electrical
engineering concepts. I have had practical and theoretical training as a graduate trainee Electrical
Engineer and gained good understanding of what is required to be a competent Electrical Engineer.
Highly motivated individual with skills in troubleshooting and problem solving electrical problems.
I am currently looking for a new and challenging position in the UAE, one that will make best use of
my existing skills & experiences also further my personal development.
E D U C A T I O N
B S C I N ( E E E ) E L E C T R I C A L A N D E L E C T R O N I C E N G I N E E R -
2 0 1 3
Islamic University of Technology (IUT).
WORK EXPERIENCE:
3 YEARS OF EXPERIENCE as 2years in Electrical Design and Site Engineer for MEP Building
construction projects as well as 1 years worked as an Assistant Electrical Engineer in MV/LV.
P E R S O N A L D E T A I L S
Nationality: Ethiopian
Date of Birth: 12-12-1991
Postal Address: Abu Dhabi, UAE
Tell: +971509084607/+971554287149
Email: hassantiim@gmail.com
2. 2
WORK EXPERIENCE (3 YEARS)
MEP Design Engineer - Construction Dept
SAM ELECTRO-MECHANICAL, Abu Dhabi Sep-2014 – Present
Projects Handled:
, Offices ,Stores, Bank & Hospital (Commercial Projects) (Abu Dhabi, Dubai, Al Ain)
Mosque Project (Sharjah)
Dhabi City.
Responsibilities: Work Details during Tendering
Responsible for leading the Electrical Designing related to Abu Dhabi Distribution
Company (ADDC) High Rise Buildings for offices, Commercial Towers and Staff
Residential Villas using British Standards and codes.
Reporting to General Manager – MEP
Assisting General Manager in the preparation of tender from beginning stage till the
submission.
Detail study of the scope of tender, drawings, schedule equipment’s, specifications,
quantity take off and preparation of Bill of Quantities for Electrical equipment’s in Excel format
for lump sum projects as per principles of British Standard codes, measurements, project
duration scheduling and submitting to Bidding Department to Bid.
Electrical load estimation, design as per International regulations, UK and British
Standards BS7671, development of single line diagram and control schematics, electrical
equipment selection sizing and protection (Transformer, generator, motors, Bus duct,
Capacitor Bank, UPS, etc..)
Cable sizing, bus bar, earthing system according to the load analysis and routing, short
circuit calculation, voltage drop calculation, lighting and illumination design.
Providing guidance to prepare Lighting layouts, Load Schedule, Single Line Diagram and
the related technical calculations like panel board circuits and the main distribution board
circuit breaker size selection.
Involved in preparation of Lighting and power design with the architect, using Auto cad,
producing Lighting and power distribution system.
Accountable for attending meetings with Team/User for resolving different technical
issues at the design stage.
Making site survey for upcoming projects.
3. 3
Responsibilities Continued
Work Details during Execution
Involved in the technical and management supervision along with site execution and
highly driven in various project related to high rise buildings.
Evaluate engineering proposals, Shop Drawings & Design comments for sound electrical
engineering practice and conformance with established safety and design criteria and
recommend approval or rejected.
Planning and execution on the electrical side for MEP projects closely monitoring the
construction activities, attending weekly meetings at site with other engineers, Contractors and
Consultants, maintained weekly status reports.
Review and approval of shop drawings & material submittals submitted by Contractor.
Installations of all electrical works were carried out as per approved Shop Drawings
ensuring compliance with safety requirements and as per standards.
Co-ordinate with Mechanical, civil, Architect Engineers, Discuss technical aspects of
electrical system with contractor towards successful completion of project.
Installation of Electrical Installation,Lighting Protection System, LV & Switchgears (MDB,
SMDB,DB).
Following Higher management time schedule instructions and advices, reporting work
field condition problems & status to higher management, following activities of other
departments in site.
Coordinate with Contractor for the fast progress work on site implementation of advance
system and material available in market as per the requirement and conduct weekly Site
Inspection & prepare Monthly Progress Reports.
4. 4
Conduct inspections for Quality Control and Quality Assurance Program, reporting, finding
and recommendations.
Electrical Design Engineer
IPRO ME & Engineering consultancy - Dubai
Aug 2013 – Feb-2014
Key Responsibilities in M/S Megha Engineering & Infrastructures Ltd (M.E.I.L)
Project Co-Ordination, Monitoring, Billing & follow up with internal departments between
Site & Head Office for Material Procurement, Planning, Fund Arrangement as per the site
requirement for the completion of day to day activities of project like supply & erection to fulfil
the customer’s project requirement.
Site visit to prepare the work schedules and meeting with clients at different stages of
project.
To Co-ordinate with various customers for arranging inspection at various stages.
To understand the difficulties faced by internal project departments & vendors and finding
out solutions for the same.
Report to Sr Engineer - Sr Consultant.
Providing guidance to prepare Lighting Layouts, Power Layouts, Load Schedule, Single Line
Diagram and related calculation’s like panel board circuits and Main Distribution Board Circuit,
Breaker Size selection etc…
Calculate Electrical Load Calculation, Breaker Selection, Cable Sizing Calculation, Capacitor
Bank Selection, bus bar and Earthing Calculation, Voltage drop calculation, Distribution Boards,
Etc...
Preparation of bill of materials and cost estimates of Electrical Wiring Installations, Repair
and maintenance reports for Residential and Commercial Buildings.
Preparation of Single Line Diagram Layouts, Specification for Electrical Equipment’s such
as Transformers, Energy Meter, Circuit Breakers (MCB, MCCB), capacitor bank, RYB cables,
Voltage Drop Calculations, Distribution Boards, etc.
Quotation for electrical equipment’s collecting from local services providers and submitted
to external consultants.
Maintaining records and archives to company standards.
5. 5
Electrical Engineer Internship
Kingston Hospital project, Shining Tower, Abu Dhabi, UAE (6 month at site under
training)
Responsibilities
During the six weeks internship program I got introduced to Electrical engineering systems
such as AC calculation / extinguishing system, buildings’ water supply / telephone system and
buildings’ HVAC systems. Moreover, I got professional training in calculating the cooling /
heating load.
TECHNICAL SKILLS
Computer Aided Drawing (Auto-CAD) and Finite Element
,
PERSONAL SKILLS/COMPETENCES
-Motivated and Flexible.
LANGUAGE
- Arabic(Speaking,Writing) - Chinese(Speaking),
Recommendation letters will be made available upon request
REFERENCE
1.Mohamed Ajmani (971551857199)Sr Engineer
2.Abdulhakim (971554287149)Sr Engineer