25 most widely used inspection checklist in industries-1.pdf

Global EHS
Environment, Health, Fire And Safety
Doc Id : GlobalEHS/CHK/000-01 Rev:00
For Information purpose only https://globalehs.co.in | Page 1 of 2
25 Most Widely used Inspection
Checklists In Industries
Sr.
No
Name
Document
Number
Website Link
1
Backhoe Loader
Inspection Checklist
GlobalEHS/CHK/001 https://globalehs.co.in/checklist-inspection-of-backhoe-loader/
2
Excavator
GlobalEHS/CHK/002 https://globalehs.co.in/checklist-inspection-of-excavator/
3
Portable Grinder
GlobalEHS/CHK/003 https://globalehs.co.in/checklist-inspection-of-portable-grinder/
4
Mobile Crane
GlobalEHS/CHK/004 https://globalehs.co.in/checklist-inspection-of-mobile-crane/
5
Bench Cutting
Machine Inspection
Checklist
GlobalEHS/CHK/005 https://globalehs.co.in/checklist-inspection-of-bench-cutting-machine/
6
Welding Machine
GlobalEHS/CHK/006 https://globalehs.co.in/checklist-inspection-of-welding-machine/
7
Circular Saw
GlobalEHS/CHK/007 https://globalehs.co.in/checklist-inspection-of-circular-saw/
8
Hand Drill Machine
GlobalEHS/CHK/008 https://globalehs.co.in/checklist-inspection-of-drill-machine/
9
Earth Compactor
GlobalEHS/CHK/009 https://globalehs.co.in/checklist-inspection-of-earth-compactor/
10
Dumper Truck
GlobalEHS/CHK/010 https://globalehs.co.in/inspection-checklist-of-dumper-truck/
11
Concrete Mixer
GlobalEHS/CHK/011 https://globalehs.co.in/inspection-checklist-concrete-mixer/
12
Transit Mixer
GlobalEHS/CHK/012 https://globalehs.co.in/inspection-checklist-of-transit-mixer/
13
Concrete Pump
GlobalEHS/CHK/013 https://globalehs.co.in/concrete-pump-inspection-checklist/
14
Boom Placer
GlobalEHS/CHK/014 https://globalehs.co.in/boom-placer-inspection-checklist/
15
Bar Cutting Machine
GlobalEHS/CHK/015 https://globalehs.co.in/bar-cutting-machine-safety-inspection-checklist/

Global EHS
Doc Id : GlobalEHS/CHK/000-01 Rev:00
Sr.
No
Name
Document
Number
Website Link
16
Bar Bending Machine
GlobalEHS/CHK/016 https://globalehs.co.in/bar-bending-machine-safety-inspection-checklist/
17
Breaker
GlobalEHS/CHK/017 https://globalehs.co.in/breaker-safety-inspection-checklist/
18
Hydra
GlobalEHS/CHK/018 https://globalehs.co.in/hydra-safety-inspection-checklist/
19
Electrical Vibrator
GlobalEHS/CHK/019 https://globalehs.co.in/electric-vibrator-inspection-checklist/
20
Tower Crane
GlobalEHS/CHK/020 https://globalehs.co.in/tower-crane-inspection-checklist/
21
Grader Inspection
Checklist
GlobalEHS/CHK/021 https://globalehs.co.in/grader-inspection-checklist/
22
Gantry Crane
GlobalEHS/CHK/022 https://globalehs.co.in/gantry-crane-inspection-checklist/
23
EOT Crane
GlobalEHS/CHK/023 https://globalehs.co.in/eot-crane-inspection-checklist/
24
Trailer
GlobalEHS/CHK/024 https://globalehs.co.in/trailer-truck-inspection-checklist/
25
Gas Cutting Set
GlobalEHS/CHK/025 https://globalehs.co.in/gas-cutting-set-inspection-checklist/
Follow us by clicking on link below to get more information on
Environment, Health, Fire and Safety

Global EHS
Equipment Inspection Checklist : Backhoe Loader
For Information purpose only www.globalehs.co.in | Environment, Health, Fire And Safety Page 1 of 1
Company Name :
Date of Inspection :
Vehicle Make :
Vehicle Model :
Vehicle Number :
Owned/Hired/Contractor :
Backhoe Loader Inspection Checklist
SN Details Yes/No Comments
1 Vehicle condition should be sound and certified by competent authority.
2 Free from damage in tyres (Air pressure, cuts, cracks, etc.).
3 Head lights, tail lights and indicators are in working condition.
4 Side mirrors should be in good condition.
5 Windscreen should be in good condition.
6 Wipers should be in working condition.
7 Operator`s cabin and driver seat should be in good condition.
8 Hydraulic cylinders and hoses are in good condition and there should not
be any leakage.
9 Outrigger should be free from damage.
10 Reflective tape should be fixed at proper places.
11 Front and Reverse horn in working condition.
12 First Aid Box available.
13 Fire Extinguisher available.
14 Operator have valid and suitable license as per legal requirement.
Fit for usage : Yes No
Inspection Done By : Reviewed by :
Name : Name :
Dept. & Designation : Dept. & Designation :
Sign with date : Sign with date :

Global EHS
https://globalehs.co.in
Equipment Inspection Checklist : Excavator
For Information purpose only | Global EHS | Environment, Health, Fire And Safety | Page 1 of 1
Company Name :
Vehicle Make :
Vehicle Model :
Vehicle Number :
Excavator Inspection Checklist
1 Engine and rotating part should be properly covered.
2 Track frame should be in good and working condition.
3 Crawler belt and shoes should be in good condition.
4 Boom and arm should be free from defects like corrosion, bend, etc.
5 Hydraulic cylinder and hoses should be in good condition.
6 Bucket, cutter pins should be free from defects, e.g., damage, corrosion,
bend, etc.
7 Teeth should be free from defects, e.g., damage, corrosion, bend, etc.
8 Swing horn should be in good condition.
9 Head & tail light and indicators are in working condition.
10 Wind screen should be in proper condition.
12 Swing horn should be in good condition.
13 First Aid Box available.
14 Fire Extinguisher available.
Excavator Inspection Checklist Diagram
Name : Name :

Global EHS
Equipment Inspection Checklist : Portable Grinder
For Information purpose only | Global EHS | Environment, Health, Fire And Safety | Page 1 of 1
Company Name :
Equipment Make :
Equipment Model :
Equipment Number :
Portable Grinder Inspection Checklist
1 Grinder should be physically sound and in working condition.
2 Cable should be damage free and always use industrial plug to take
power connection.
3 Capacity of Motor should be marked clearly or refer manual.
4 Dead man switch should be in working condition.
5 Flexible cord should be provided to prevent cable damage.
6 Handle should be provided for better control.
7 Wheel guard should be installed with grinder. Gap between guard and
wheel should not be more than 3mm.
8 Grinding/cutting wheel should free from defect and rotating capacity
should be marked.
9 Machine should be double insulated or grounded by proper means.
10 Must use designated key for removing and changing wheel.
11 Machine must be operated by competent and experienced person.
12 RPM of wheel should be more than RPM of motor.
Portable Grinder Inspection Checklist Diagram
Name : Name :

Global EHS
Equipment Inspection Checklist : Mobile Crane
For Information purpose only www.globalehs.co.in | Page 1 of 1
Company Name :
Vehicle Make :
Vehicle Model :
Vehicle Number :
Mobile Crane Inspection Checklist
1 Vehicle Body shall be sound and in good condition.
2 Free from damage in tyres (cuts, cracks, ware & tare etc.).
5 Wire rope of the crane free from damage.
6 Safe Work Load (SWL) Marked and visible.
7 Hoist Limit Switch available and in working condition.
8 Spirit level should be installed and working properly.
9 Safety Latch available and in working condition.
10 Outrigger with spreader mat should be in sound and working condition.
11 Boom should be in good condition without any damage, no crack, smooth working
etc.(Check by extending it fully).
12 Oil leakage should not be there in hydraulic part.
13 Working safe load indicator.
14 Front, Reverse and Swing horn should be in working condition.
16 First Aid Kit should be available in operator cabin (with in expiry date).
17 Fire Extinguisher available( in good condition, pressure within range)
Mobile Crane Inspection Diagram
Name : Name :

Global EHS
Equipment Inspection Checklist : Bench Cutting Machine
Company Name :
Equipment Make :
Equipment Model :
Equipment Number :
Bench Cutting Machine Inspection Checklist
1 Machine body should be sound and in good condition.
2 Moving part of machine should be properly guarded. Ensure Guard provided by
machine manufactures which is inbuilt is safe and sound and properly fitted.
3 Auto adjustable guard should be in functional condition.
4 On/Off switch should be in good condition without any damage.
5 Cutting wheel should be free from defect, and rotating capacity should be marked.
Cutting wheel should be of standard quality only.
6 Positioning screw should be in working condition and without any damage and
can be used smoothly.
7 Power cable should free from damage.
8 Power connection should be taken using industrial plug only.
9 Machine should be provided with double insulation and properly grounded.
10 Must use designed key for changing cutting wheel.
11 Machine should be operated by competent person and experience person only.
Bench Cutting Machine Inspection Diagram
Name : Name :

Global EHS
Equipment Inspection Checklist : Welding Machine
Company Name :
Equipment Make :
Equipment Model :
Equipment Number :
Welding Machine Inspection Checklist
1 Welding machine should be physically sound and in working condition.
2 Switches should be free from damage and properly insulated.
3 Welding and return led connection should be properly tight by means of
socket/lugs.
4 Welding and return led should be free from damage for eg. Cut, Open,
too many joints, etc..
5 Welding holder should be in good condition without any metal contact.
6 Earthing holder should be in good condition and free from rust.
7 Welding machine should be grounded properly.
8 Make suitable fire extinguisher at work place.
9 Make fire retardant material available at work place.
10 Provide welding booth or proper work station whenever required.
11 Welding work to be carried out by experience and competent person.
12 All Cable should be damage free and always use industrial plug to take
power connection.
Welding Machine Inspection Checklist Diagram
Name : Name :

Global EHS
Equipment Inspection Checklist : Circulat Saw
Company Name :
Equipment Make :
Equipment Model :
Equipment Number :
Circular Saw Inspection Checklist
1 Circular Saw body should be physically sound and in good condition.
2 Switches should be free from damage and properly insulated.
3 Fixed guard of machine should be in good condition. (Loose, displaced,
corroded not allowed)
4 Auto Adjustable guard should be in working condition.
5 Circular Saw Wheel should free from defect, crack, deterioration and rotating
capacity should be marked over it.
6 All cable should be free from damage and connection should be allowed
through industrial plug only. (Cuts and joints not allowed)
7 Circular Saw should be double insulated or grounded.
8 Must use designated key for changing wheel.
9 Circular Saw should be operated by experience and competent person.
10 Operator should be provided with and using proper personal protective
equipment.
11 Circular saw wheel in use should be suitable for the material being cut.
Circular Saw Inspection Checklist Diagram
Name : Name :

Global EHS
Doc Id : GlobalEHS/CHK/008 Rev:00
For Information purpose only https://globalehs.co.in Page 1 of 1
Hand Drill Machine Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Machine should be physically sound and in working condition.
2 All power cable should be free from damage.
3 Flexible cable should be provided to avoid prevent cable damage.
4 Dead man switch should be damage free and in working condition.
5 Availability of handle for better grip and control.
6 Drill bit should be in good condition without any damage.
7 Always use designated key to remove and change drill bit.
8 Double insulation or grounding provided to Hand Drill machine.
9 Use adjustable drill stop wherever required.
10 Machine should be operated by experienced and competent person only.
Inspection Done By:
Name :
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name :
Department:
Designation:
Signature:
Date:

Global EHS
Earth Compactor Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Earth compactor or roller should be physically sound and in good
condition.
2 No damage in tire.
3 Compacting roller should be free from damage and move freely.
4 Moving parts should be covered with fix guards.
5 Head lights, Tail lights, indicators, front horn and reverse horn are in
working condition.
6 Side mirrors should be clean and in correct position without damage.
7 Wind shield should be in proper condition.
9 Fire extinguisher and First Aid Box should be available in operator cabin.
10 Operator should have valid and suitable license.
Inspection Done By:
Name :
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name :
Department:
Designation:
Signature:
Date:

Global EHS
Dumper Truck Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Dumper Truck should be physically sound and in good condition.
3 Side mirrors should be clean and in correct position without damage.
4 Carrier should be free from damage and in good condition.
working condition.
6 Wind shield should be in proper condition.
8 Sear belt should be available and in working condition without any
damage.
9 Reflective tape should be fixed at all required place along with red
triangle.
10 Hydraulic cylinder and hoses should be in good condition and free from
leakage.
11 Vehicle registration number should be visible and displayed properly.
12 Fire extinguisher and first aid kit should be available in driver cabin.
13 Operator should have valid and suitable driving license.
14 All beaks including hand break (Emergency Break) should be in working
condition.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Concrete Mixer Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Mixer Machine should be physically sound and in good condition.
3 Engine should be covered with proper machine guard.
4 Moving parts should be covered with fix guards.
5 Proper Rotator handle lock should be available.
6 Rotator handle should be free from defect.
7 Handle for movement of mixer should be without defect.
8 Spark arrester should be used if required.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Transit Mixer Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Transit Mixer should be physically sound and in good condition.
3 All mirror should be in good condition and properly positioned.
4 All Rotatory part should be covered with fixed guard.
5 Registration number should be visible.
6 Wind shield should be without damage.
working condition.
8 Wiper should be in working condition.
9 Red triangle and reflective tape should be fixed at proper place.
10 Permanent ladder should be provided and should be in good condition.
13 Normal and hand (Emergency Break) should be in working condition.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Concrete Pump Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Concrete Pump should be physically sound and in good condition.
2 Tire should be free from damage.
3 All Rotatory part should be covered with fixed guard.
4 Outrigger should be in working condition and free from damage.
5 Emergency Stop button should be checked and in working condition. It
should be clearly marked and identifiable.
6 Panel should be covered properly.
7 Hopper should be in good condition.
8 Suitable mesh should be available at hopper to avoid contact with
moving part.
9 Hook should be proper and in good condition which can withstand while
shifting of Concrete pump.
10 All pipe joint should be tight with the help of proper clamp.
11 In case of electricity operated, electrical connection should be taken
properly and machine should be grounded.
12 Operator should be competent and authorised.
13 All pipes to be used should be free from damages and physically sound.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Boom Placer Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Boom Placer should be physically sound and in good condition.
2 Tire should be free from damage.
3 Wind shield should be without damage.
4 All mirror should be in good condition and properly positioned.
working condition.
6 Boom should be physically sound and without any defect.
7 Wiper should be in running condition.
8 Outrigger should be in working condition and free from damage.
9 Hydraulic cylinder and hoses should be free from leakage and in working
condition without any defect (Like Jam, corroded, etc.).
10 Pipe should be free from defects.
11 Rotatory part or moving parts should be covered with fix guard.
12 Red triangle and reflective tape should be fixed at proper place.
15 Normal and hand (Emergency Break) should be in working condition.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Bar Cutting Machine Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Bar Cutting Machine should be physically sound and in good condition.
2 Operating leaver should be insulated by nonconductive material.
3 All Rotating part should be covered with fixed guard.
4 Motor junction box should be proper and fully packed.
5 Bar Guard should be fixed with machine properly.
6 Machine should be grounded properly.
7 Power cable should be free from damage.
8 Electrical connection should be taken through industrial plug only.
10 Machine should be fixed on ground properly to avoid movement while in
operation.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Bar Bending Machine Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Bar Bending Machine should be physically sound and in good condition.
2 Power cable should be free from damages.
3 All switches should be free from damage and in working condition.
4 Electrical connection taken through industrial plug only.
5 Emergency Stop button should be checked and in working condition. It
should be clearly marked and identifiable.
6 Bar support should be fitted properly with machine.
7 Pin should be tightened properly.
8 Machine should be grounded properly.
9 Paddle should be in good condition and working properly.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Breaker Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Breaker should be physically sound and in good condition.
2 Flexible cord should be provided to keep cable free from damage.
3 Handle should be provided for better control.
4 Bit should be in free from defect and in good condition.
5 Double insulation to be provided or properly grounded.
6 All cable should be free from damages.
7 Switch should be free from defect and in working condition.
8 Power connection to be taken through industrial plug only.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Hydra Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Hydra shall be sound and in good condition.
2 Tyre should be Free from damage (cuts, cracks, ware & tare etc.).
5 Wire rope of the crane free from damage.
6 Safe Work Load (SWL) Marked and visible.
7 Hoist Limit Switch available and in working condition.
8 Sling drum should be free from damage.
9 Safety Latch available and in working condition.
10 Windscreen and wiper should be in good condition.
11 Boom should be in good condition without any damage, no crack, smooth
working etc. (Check by extending it fully).
12 Oil leakage should not be there in hydraulic part.
13 Registration number should be visible.
14 Working safe load indicator.
15 Front, Reverse horn should be in working condition.
16 Load Chart Available in Operator cabin.
18 Fire Extinguisher available (in good condition, pressure within range)
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Electrical Vibrator Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Electrical Vibrator should be physically sound and in good condition.
2 Motor junction box should be free from damage and in packed condition.
3 Switch should be properly insulated.
4 Power cable should be free from damage.
5 Guard around rotating part should be fixed properly.
6 Needle of machine should be free from damages and tightly connected
with motor.
7 Electrical connection taken through industrial plug only.
8 Electrical vibrator should be properly grounded.
9 Proper handle should be provided for movement of Electrical Vibrator.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Tower Crane Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Tower crane should be physically in good condition, free from defects and
should have valid TPI.
2 Cabin should be in good condition, equipped with wind glasses and wireless
communication.
3 Proper foundation provided as per design.
4 Safety latch in hook and in working condition.
5 Safe working load should be marked.
6 All Sling should be free from defects.
7 Hydraulic cylinder, hoses should be in good condition and free from leakage.
8 Trolley condition should be in good condition.
9 Over hoist limit switch should be in working condition.
10 Limit switch should be provided and in working condition.
11 Counter weight should be properly fixed and free from defects.
12 Tower crane should be grounded properly as per standard.
13 Safe load indicator should be in working condition.
14 Anemometer should be in working condition.
16 All power connection should be taken through industrial plug.
20 Operator have suitable license and valid experience certificate as per
requirement.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Grader Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Grader should be physically in good condition, free from defects and should
have valid TPI.
2 Tyres should be free from damage (Air pressure, cuts, cracks, etc.).
6 Side Mirror should be in good condition.
7 Hydraulic cylinders and hoses are in good condition and there should not be
any leakage.
9 Reflective tape, Red Triangle should be fixed at proper places.
12 Counter weight should be properly fixed and free from defects.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Gantry Crane Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Gantry crane should be physically in good condition, free from defects and
2 Operator Cabin should be in good condition.
3 Proper base to run should be available.
4 Walkway should be free from obstruction and free from defects along with
Guard Rails.
5 Safe working load should be marked.
6 Access ladder should be provided with proper railings.
7 Proximity sensor should be in working condition.
8 Slings should be free from defects and tested properly.
10 Rotating parts should be covered properly by means of canopy or guarding.
11 Audible horn should be available and in working condition.
16 Deflection Test Should be carried out for smooth operation.
17 Operator should have suitable and valid license.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
EOT Crane Inspection Checklist
Company Name :
Make :
Model :
Number :
1 EOT crane should be physically in good condition, free from defects and
2 Railing should be in good condition and free from obstruction.
3 Power cable should be free from defect and organised.
5 Safe working load should be marked at proper place and should be visible.
6 Wire rope or sling should be free from defects and tested properly.
7 Rotating parts should be covered properly with machine guarding.
8 Audible horn should be available and in working condition.
9 Load Chart Available at proper place.
10 Deflection Test Should be carried out for smooth operation.
11 Remote should be ion good and working condition.
12 Operator should have suitable and valid license.
13 Safe access and egress should be provided.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Trailer Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Trailer Truck should be physically in good condition, free from defects and
2 Tyres should be free from damage (Air pressure, cuts, cracks, etc.).
3 Side mirror should in good and in correct position.
4 Carrier should be free from defects.
8 Reflective tape, Red Triangle should be fixed at proper places.
9 Registration number should be written and visible.
10 Seat belt should be in working condition.
11 Normal and Emergency break (Hand Break) should be in working condition.
15 Driver should have valid and suitable license as per legal requirement.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

Global EHS
Gas Cutting Set Inspection Checklist
Company Name :
Make :
Model :
Number :
1 Cylinder should always be kept in trolley.
2 Always keep cylinder in upright position and secured.
3 Always ensure valve protection cap with it.
4 Regulator should be of standard and free from defect.
5 Pressure gauge should be in good condition, without any defect.
6 Hose pipe is in good condition and colour coded as per standard.
7 Joint should be tight enough and without any defect.
8 Must use Industrial clip for fitting.
9 Flash back arrestor should be provided at both end (At cylinder pressure
gauge and at torch hose pipe).
10 Proper PPE should be used while use for e.g., Safety Goggles, Leather
Apron, Leather hand gloves, etc.
11 Torch should be in good condition, without any defect.
12 First Aid Kit and Fire Extinguisher should be available at work place.
13 Provide booth if required. Refer image in box for ideal Gas Cutting Station.
14 Competent person only should carry out gas cutting work.
Inspection Done By:
Name:
Department:
Designation:
Signature:
Date:
Fit for use: Yes/No
Review Done By:
Name:
Department:
Designation:
Signature:
Date:

25 most widely used inspection checklist in industries-1.pdf

Recommended

Recommended

More Related Content

Similar to 25 most widely used inspection checklist in industries-1.pdf

Similar to 25 most widely used inspection checklist in industries-1.pdf (16)

More from Global EHS

More from Global EHS (11)

Recently uploaded

Recently uploaded (20)

25 most widely used inspection checklist in industries-1.pdf