1. VICTAULIC, YOUR
PREFABRICATION
PARTNER
VICTAULIC, YOUR
PREFABRICATION
PARTNER

2. PRE-CONSTRUCTION
Information Required
• Schematic drawing
• Layout drawing
• Technical datasheets
3D Design
• Full 3D model in Revit
• Drawing layout “For Approval”
Advanced Bill of Material
• Early stage Bill of Quantities
• Avoid delivery problems
• Estimation pricing package
Pre-Fabrication
Options
• Loose Cut
Lengths
DESIGN BID
Refrigerant
lbs (kg)
Total Weight
(inc. Refrigerant) lbs (kg)
Water Volume gal (l) Center of Gravity ins (mm)
Evap Cond X Y Z
Operating
635
(288)
11806
(5355)
61
(233)
56
(213)
50
(1278)
37
(945)
20
(510)
Shipping
10823
(4909)
-
(-)
-
(-)
50
(1267)
37
(943)
21
(533)
4. 2.5 in. (64 mm) diameter lifting holes are provided. See installation manual for lifting instructions.
5. All water connections are given in standard U.S. pipe sizes. Standard connections are suitable for welding or grooved
couplings.
6. Vibration isolator pads are provided for field installation (0.25 in (6 mm) thick when loaded).
7. If main power wiring is brought up through the floor, this wiring must be outside the envelope of the unit.
8. The shipping skid adds 4 in. (105 mm) to the overall unit height.
9. Dimensions shown are for units with standard 150 psi (1034 kPa) design water side pressure. Check factory for unit
dimensions with higher pressures.
1. 1 in. (25 mm) FPT evaporator and condenser relief valves must be piped per ANSI/ASHRAE 15.
2. At a minimum, length of tube sheet to tube sheet dimensions is required at either end for tube removal, 36 in. (914 mm) is
required at other end and each side and top for service.
3. Final connections must allow for 0.5 in. (12.7 mm) manufacturing tolerance.
Product Drawing Unit Tag: Centrif 004 Sales Office: McQuay UK Operations
Product: Water Cooled Centrifugal Chiller Project Name: Selfridges Sales Engineer: James Henley
Model: WSC087M/E2609-2RB/C2209-2RB Date: 23/02/2015 Ver/Rev: Sheet: 1 of 5 Scale: NTS Tolerance: +/- 1.0” Dwg Units: in (mm)
WSC087MAU47GYYLBE2609BE2RBC40446CCYAC2209CLYY2RBYYYC40965CCYYYYAA134064EY2LEYYAVLWYYYYY0534YM2B1YAXS31AB0502YPYYYYM0AYW000000000000JDNNNN
No change to this drawing may be made unless approved in writing by McQuay UK Ltd. Purchaser must determine that the equipment is fit and sufficient for the job specifications
Product Drawing Unit Tag: Centrif 004 Sales Office: McQuay UK Operations
Product: Water Cooled Centrifugal Chiller Project Name: Selfridges Sales Engineer: James Henley
Model: WSC087M/E2609-2RB/C2209-2RB Date: 23/02/2015 Ver/Rev: Sheet: 2 of 5 Scale: NTS Tolerance: +/- 1.0” Dwg Units: in (mm)
WSC087MAU47GYYLBE2609BE2RBC40446CCYAC2209CLYY2RBYYYC40965CCYYYYAA134064EY2LEYYAVLWYYYYY0534YM2B1YAXS31AB0502YPYYYYM0AYW000000000000JDNNNN
No change to this drawing may be made unless approved in writing by McQuay UK Ltd. Purchaser must determine that the equipment is fit and sufficient for the job specifications
victaulic.com
06.23
7470 Rev C Updated
11/2015
© 2015 Victaulic
Company
. All rights reserved
.
ALWAYS
REFER TO ANY NOTIFICA
TIONS AT THE END OF THIS DOCUME
NT REGARD
ING PRODUC
T INSTALL
ATION, MAINTEN
ANCE OR SUPPOR
T.
2 - 12"/50 - 300 mm
1.0 PRODUCT DESCRIPTIONAvailable Sizes
• 2 – 12"/50 – 300 mmPipe Material
• Carbon steel, Stainless steelMaximum Working Pressure• Accommodates pressures ranging from full vacuum
(29.9 in Hg/760 mm Hg) up to 750 psi/5171 kPa.
• Working pressure dependent on material, wall thickness and size of pipe.
Operating Temperature
• Dependent on gasket selection from section 3.0.
Function
• Joins carbon steel and/or stainless steel pipe.
• Provides a rigid pipe joint designed to restrict axial or angular movement.
Pipe Preparation
• Cut or roll grooved in accordance with Submittal 25.01: Victaulic Standard Groove Specifications.
Codes and Requirements• Hanger support spacing corresponds to ASME B31.1 Power Piping Code and ASME B31.9 Building Services
Piping Code.
2.0 CERTIFICATION/LISTINGS
NOTES
• See Submitta
l 10.01: Victaulic
Products
for Fire Protectio
n Piping Systems
- Regulato
ry Approval
Referenc
e Guide for details.
• See Submitta
l 02.06: Victaulic
Potable Water Approval
s ANSI/NS
F for potable water approvals
if applicabl
e.
Victaulic®
QuickVic™
Rigid CouplingStyle 107N
06.23
1
System No.
LocationSubmitted By
Date Spec Section
ParagraphApproved
Date
Rev :
Checked by :
Drawn by : Date :
Drawing number :
All Victaulic drawings and piping engineering submittals will be based on information furnished to
us and is provided solely as an aid to procurement and installation. The Victaulic Company is not
responsible for design by engineer of record, erection, or operation. Liability of Victaulic Company with
reference to descriptions, lengths, locations, dimensions, or any other data shown herein is limited to the
amount charged by Victaulic Company for producing the drawing in question. In the event of an order,
Victaulic products must be used in accordance with published specifications and Victaulic literature.
NOTE: Contractor to field verify all equipment configurations, nozzle locating dimensions and
elevations for conformance to Victaulic layout drawing(s) PRIOR TO CUTTING PIPE. Please notify
Victaulic Construction Piping Services Division for recommendations regarding any deviations.
Date :
Sheet :
SELFRIDGES & Co
Chiller Room
Total - Isometric Views
15-76209 _ 05 _ Total 2-2
L. Luypaert
P. Janssens
REV 0
18/06/2015
18/06/2015
CD-Total2-2
Total isometric view
Detail secondary
chilled water pumps
Detail condenser
water pumps
Detail Primary chilled
water pumps
Detail chiller
connections
Victaulic check valve
Victaulic butterfly valve
Non - Victaulic
actuated valve
Victaulic wye strainer
Victaulic
check
valve
Victaulic
butterfly
valve
Victaulic
wye
strainer
Victaulic
butterfly
valve
Victaulic
check
valve
Victaulic
butterfly
valve
Victaulic
wye
strainer
Victaulic
butterfly
valve
Victaulic
wye
strainer
Victaulic
butterfly
valve
Victaulic
check
valve
CH - 01
CH - 02
CH - 03
CH - 04
PP - 01
PP - 02
PP - 03
PP - 04
CP - 01
CP - 02
CP - 03
CP - 04
ADS - 01
SP - 06/07
SP - 01
SP - 05
SP - 02
SP - 04
SP - 03
Heat meters
Heat meter
No. Description Issued by Date
1 Revision 1 Date 1
Info Customer :
Schematic drawing
Layout drawing
Technical Datasheets
ABOM :
Early stage BOQ
Avoid delivery problems
3D Design + Drawings for approval :
Full 3D model in Revit
Drawing layout “ For Approval “
Pre-Fabrication service:
Increase productivity on site
Construction BOM + Cut lengths
BOM’s/ Cut lengths by area for
ordering/pre-fabrication purpose
Area 1
Project meeting
Reality check
structural & civil
situation
ection Service
etal to Metal
requirement
Offset rigid couplings
Fabrication Service Explanation - REV0
15/12/2015
on Cell
s
d fittings
Cut Lengths
• Fabrication
Spools
• Skids / Modules
Fab Spools
Prefabrication

3. CONTRACTOR DELIVERY
CONSTRUCTION
3D Drawings for Approval Victaulic Fabrication Spools
• Pre-cut pipes
• Pre-installed fittings & valves
Skids / Modules
Construction BOM
BOM’s/ Cut length
ordering/pre-fabric
Victaulic Fabrication Cell
Pre cut pipes
VicSticks: Pre installed fittings
C
B
or
Victaulic Fabrication Cell
Pre cut pipes
VicSticks: Pre installed fittings
n + Drawings for approval :
odel in Revit
ayout “ For Approval “
Pre-Fabrication service:
Increase productivity on site
Area 1
Project meeting
Fabrication Service Explanation - REV0
15/12/2015
n + Drawings for approval :
odel in Revit
ayout “ For Approval “
Pre-Fabrication service:
Increase productivity on site
Area 1
Project meeting
Fabrication Service Explanation - REV0
15/12/2015
n + Drawings for approval :
odel in Revit
ayout “ For Approval “
Pre-Fabrication service:
Increase productivity on site
Area 1
Project meeting
Fabrication Service Explanation - REV0
15/12/2015
• BOMs / Cut lengths by area for ordering /
pre-fabrication purpose
Koelmachine 2
Koelmachine 1
TSA
Koeltoren 1
Koeltoren 2
1880
13344
1503419578
513584
943










1405
798330
286367
702









2851292375
608 522
296
13
B
845160016008951600
2000
680 2400 680
4940
3760
Rev :
Checked by :
Drawn by : Date :
Drawing number :
All Victaulic drawings and piping engineering submittals will be based on information furnished to us
and is provided solely as an aid to procurement and installation. The Victaulic Company is not responsible
for design by engineer of record, erection, or operation. Liability of Victaulic Company with reference to
descriptions, lengths, locations, dimensions, or any other data shown herein is limited to the amount
charged by Victaulic Company for producing the drawing in question. In the event of an order, Victaulic
products must be used in accordance with published specifications and Victaulic literature.
NOTE: Contractor to field verify all equipment configurations, nozzle locating dimensions and
elevations for conformance to Victaulic layout drawing(s) PRIOR TO CUTTING PIPE. Please notify
Victaulic Construction Piping Services Division for recommendations regarding any deviations.
Date :
Sheet :
St.60 Bodem
St.41 Flens Adapter Nippel
St.741 Flens Adapter
St.716H Terugslagklep
St.732 Y - Filter
St.761 MS Vlinderafsluiter Hendel
St.761 MS Vlinderafsluiter Tandwielkast
St.10 Bocht 90°
St.11 Bocht 45°
St.20 T - Stuk
St.25 Reduceer T - Stuk
St.50 Concentrisch Verloop
St.107 / 07 Rigide Koppeling
St.177 / 77 Flexibele Koppeling
Victaulic product legende :
Willemswerf
Rotterdam
Techniekruimte Koeling
( Isometrisch aanzichten )
15 - 76554 _ 02 _ MP01
M. Filek
P. Janssens
REV 0
15 / 01 / 2016
F
15 / 01 / 2016
A0 - MP01St.7340 Meetflens (Oventrop)
DETAIL VERDELER KOELTORENS
DETAIL KOELMACHINE 1
DETAIL POMPEN
DETAIL TSA DETAIL KOELMACHINE 2
DETAIL KOELTORENS OP STAALCONSTRUCTIE
Gekoeld water aanvoer
Gekoeld water retour
Condenser water
aanvoer
Condenser water Retour
No. Description Issued by Date
Com pany F lam co b.v.Type F lam c oClean F400
c apa city 7 31 ltro rder_code 2 8198
m ax.pressure 1 0bard iam eter 800
w idth
1220
h eight 1810c onnec tion D N400
R
S
T
Q
293031
Rev :
Checked by :
Drawn by : Date :
Drawing number :
Date :
Sheet :
SELFRIDGES & Co
Chiller room
Bag & Tag area 1
Bag & Tag area 1 - Chillers
CD - BT1
18/06/2015
18/06/2015
REV 0
P. Janssens
L. Luypaert
All Victaulic drawings and piping engineering submittals will be
based on information furnished to us and is provided solely as an aid to
procurement and installation. The Victaulic Company is not responsible for
design by engineer of record, erection, or operation. Liability of Victaulic
Company with reference to descriptions, lengths, locations, dimensions, or
any other data shown herein is limited to the amount charged by Victaulic
Company for producing the drawing in question. In the event of an order,
Victaulic products must be used in accordance with published
specifications and Victaulic literature.
NOTE: Contractor to field verify all equipment configurations,
nozzle locating dimensions and elevations for conformance to Victaulic
layout drawing(s) PRIOR TO CUTTING PIPE. Please notify Victaulic
Construction Piping Services Division for recommendations regarding
any deviations.
Issued by DateNo. Description
BAG & TAG
AREA 1
-
CHILLERS

4. CONTACT INFORMATION
Units B1 & B2,
SG1 Industrial Park
Cockerell Close
Gunnels Wood Road
Stevenage
Hertfordshire, UK
SG 1 2NB
44 1438 310 690
viceuro@victaulic.com
WHO WE ARE
VICTAULIC
Since 1919, Victaulic has been world’s leading producer of grooved mechanical couplings and pipe-joining systems.
Used in the most demanding markets, Victaulic innovative piping technologies put people to work faster while
increasing safety, ensuring reliability and maximizing efficiency. The company has 15 major manufacturing facilities,
28 branches worldwide and over 3,600 employees who speak 43 languages across the globe. With more than 1900
active global patents, Victaulic solutions are at work in 115 countries across diverse business lines including oil and
gas, chemical, mining, power generation, water and wastewater treatment, military and marine, as well as commercial
building and fire protection. Visit www.victaulic.com and follow us on LinkedIn, Facebook, Twitter, and YouTube.
VICTAULIC