1. RESUME
NAME : GANESH.S
EMAIL ID: ganeshsan17@gmail.com
ganeshsankarapandi3@gmail.com
Contact NO: +91 99521 91466
CAREER OBJECTIVE
A highly motivated, innovative, multi-skilled Telecommunication Professional with extensive
management skills and hands on experience in Radio network optimization. Able to communicate
effectively at all levels, internally and externally, with a proven track record in a highly demanding,
rapidly changing commercial environment.
Skills & Expertise
 RF Optimization Engineer with 6.4 Years’ experience in Radio Network Optimization &
Planning, Analysis of WCDMA, GSM Networks.
 Good interpersonal skills and ability to work and interface well with the clients and colleagues.
 Good knowledge of RF Theories and Principles, Problem solving & teams building skills with
proficiency at grasping new technical concepts quickly and utilize the same in a productive
manner.
 With the strong passion and dedication coupled with the academic experience and good
communication skills to think creatively and innovatively in developing newer solutions.
PROFESSIONAL EXPERIENCE
 Currently Working as Senior Engineer in EGIL from Feb 2016.
 Previously Working as 3G RF Engineer in NSN from March 2014 to 2016 Jan.
 Previously Worked as RF Engineer in IWS from Sep 2009 to 2014 March
Employer: Ericsson India Global services
Project Title: Bangladesh Swap Project,
Designation: Senior Engineer
Duration: Feb 2016 – Present Role: Radio Network Optimization& Planning
Project Description:Monitoring & Improving RF KPI for GSM/UMTS swapped sites from Huawei to
Ericsson. Assigning Drive test plans, Analyze & Optimize poor performing cells after BTS swap
&Updating the project progress daily, weekly & monthly wise, attending meetings with customer
regarding project progress, achieving acceptance targets
Technologies : UMTS / GSM

2. Optimization RF Tools: Nemo Analyze, Aircom asset, Actix Analyzer, Tems,
MapInfo,Google Earth etc.
Responsibilities:-
 Responsible for maintaining the overall Network Quality Index of the circle. Daily monitoring
& analysis of NW KPIs to maintain optimum network standards and also drive a team of
NPO engineers to ensure quality standards across the circle.
 Comparison of network performance after swap from Huawei to Ericsson.
 Recommendation for optimization, verify the network performance.
 Identified worst performing cells and take corrective actions to meet the benchmark value.
 Ensuring cell site is on air with right parameters by conducting Single Site Verification (SSV).
 Assign drive test plans and coordinating field engineers
 Analyse Drive Test Log files and all related parameters in the core network to report to
Operator.
 Identifying Pilot polluted areas in UMTS system and interference analysis in GSM system
 Monitored performance of each site within a particular switch. Resolved issues such as high
number of dropped calls, identifying missing neighbours and RF related problems.
 GPRS/EDGE optimization, time slots assignment, setting EDGE configuration and conduction
drive-test and analysis.
Employer: Nokia Solution India Pvt Ltd
Project Title: Vodafone WCDMA Project,
Designation: 3G RF Engineer
Duration: March 2014 – Jan 2016 Role: Radio Network Optimization& Planning
Project Description: Monitoring & Improving RF KPI for UMTS. Monitoring RNC fill factor and ICSU
Loading Based on that Migration/ RNC Augmentation planning, Analyze & Optimize poor
performing cells after New sites on aired, sending job order for parameters changes & updating
the project progress daily, weekly & monthly wise, attending meetings with customer regarding
project progress, achieving acceptance targets.
Technologies : UMTS / GSM
Optimization RF Tools: Arieso Tool, Net act, Aircom asset, Atool, Actix Analyzer, Tems,
MapInfo,Google Earth etc.
Responsibilities:-
 Responsible for maintaining the overall Network Quality Index of the circle. Daily monitoring
& analysis of NW KPIs to maintain optimum network standards and also drive a team of
NPO engineers to ensure quality standards across the circle.
 Daily monitoring the NW Level NQI, Top10 City NQI, and Cluster Level as well as RNC level to
ensure the performance of the NW & escalating team for immediate action if any
degradation observed.
 Rectification in parameter discrepancy at new sites & sites after migration related to power,
admission control, accessibility, retain-ability, 2G 3G reselection/NBRs, HO parameters
etc.

3.  Driving team for the completion of SCFT of new sites, escalating the concerned team for the
punch point rectification...Like Active alarm, low Iub BW, incorrect antenna Ht..
 Planning new Coverage site requirement/4th sec coverage requirement as per the customer
complaint & Top City coverage requirement from the comparison drive test for the multiple
operators.
 Proposal for Capacity requirement of new sites/ 4th sec with & without SM /Additional
NodeB as per the DBH payload considering the DL power utilization, UL power Allocation,
Code Congestion , UL RSSI, HSDPA/HSUPA Max user failures & BB unit utilization.
 Proposing the no. of 60W LKs, HSUPA/HSDPA PS, HSDPA128 users LK requirement for the
next quarter as per the traffic projection.
 Providing the additional requirement of RNCs or RNC BW upgradation for the projected
traffic in future as per current traffic growth so that RNC Fill Factor, ICSU loading & NPGEP
loading will be normal with increased traffic. This helps in maintaining the QOS of NW.
 Responsible for check the parameter/Feature correctness in the newly introduce RNC in the
NW, also having experience in mc RNC.
 Providing the Coverage/Capacity requirement for new VF corporate accounts like Infosys,
Renault Nissan, Royal Enfield, and Mahindra City.
 Parameter consistency check for the whole NW in week once.
 Bi weekly Capacity augmentation done for the network for 60W upgradation, Code
Congestion Optimization, UL power allocation, HSDPA/HSUPA PS addition,R99 CE
addition,4th Sec Proposal, New site requirement etc…
 Maintaining the Paging Success rate of the NW >98% by retuning the 24Kbps Channel, LAC
Splitting,.
 Tracking the new Zero Traffic (CS& PS) carrying cells escalation the BSS & RF team for the
resolution.
 Monthly tracking of the LK files, likes conflicted LKs, Non- distributed LKs, escalating the
concerned team for resolution.
 Regular Physical optimization & tracking for the High SHO over Head, Overshooting Cells &
Poor Ecno Distribution cells.
 Identifying missing 3G neighbors using KPI Stats & OSS Reports.
 Monitor & maintain KPI trend daily/peak hour & improve abnormal and degradation, and
providing clarification and solution to customer.
 Site creation Neigh Creation MSS Creation script Preparation.
 ICR Neigh Creation and Lac Planning for Based on ICR required sites.
 Monitoring RNC Fill factor and ICSU Loading on Daily basis and Migration Planning for
Offloading the RNC.
Employer: IWS Pvt Ltd
Project Title: Phase VII BSNL GSM / WCDMA Swap Project,
Designation: Sr. RF Engineer Vendor: ZTE
Duration: Oct 2012 –Mar-2014 Role: Radio Network Optimization
Project Description: Monitoring & Improving RF KPI for GSM/UMTS swapped sites from Nortel,
Motorola& Huawei to ZTE. Assigning Drive test plans , Analyze & Optimize poor performing cells

4. after BTS swap ,sending job order for parameters changes & updating the project progress daily,
weekly & monthly wise, attending meetings with customer regarding project progress, achieving
acceptance targets
Technologies : UMTS / GSM
Optimization RF Tools: Net Numen, Atool, Actix Analyzer, Tems, MapInfo,Google Earth etc.
Responsibilities:-
 WCDMA /GSM KPI improvement, statistic analysis, cell wise parameter adjustment.
 WCDMA/UMTS -Verify Accessibility, Retainability PS, HSDPA Throughput and Mobility (Soft
Handover, IRAT). Audit RNC Parameters, Node B for improvement in the Service –Voice &
HSPA
 Ensuring Node B / BTS configured with right parameters ,power, codes, channels
 Troubleshooting low throughput issues for HSPA cells, network congestion related issue in
UMTS networks.
 Improving uplink/downlink interference , less throughput HSDPA cells,
 Identifying missing 2G & 3G neighbors using KPI Stats & Drive test.
 Frequency planning, Interference analysis for new & existing 2G & 3G system.
 GSM- Analyze KPI statistic independently and provide optimization solution to improve KPIs
such as GSM Call setup success rate, TCH call drop rate, SDCCH call drop rate, Handover
success rate, EGPRS DL throughput and EGPRS UL throughput etc,
 Identify and Resolve feeder swaps in GSM 900 & DCS1800.
 Monitor &maintain KPI trend daily/peak hour & improve abnormal and degradation ,provide
clarification and solution
 Monitor the network KPI, conduct the traffic balance, and propose the capacity expansion
for 2G & 3G.
 Verify BSC/RNC counters & alarms that affecting Performance.
 Generate KPI statistic trend reports NBH/Daily/Monthly and compare pre & post swap
performance.
 Assign Drive Test schedules and resolve coverage & quality related complaints.
 New Site planning for 2G/3G Based on Capacity/Coverage wise.
 Lac Planning To Improve KPI SDCCH Blocking, Paging Success Rate& Maio HSN & Cell ID
Planning.
Employer: IWS Pvt Ltd
Project Title: Phase V BSNL GSM / WCDMA Project,
Designation: RF Engineer Vendor: Huawei
Duration: Jan 2011 – Oct 2012 Role: Radio Network Optimization
Project Description: Monitoring & Improving RF KPI for GSM/UMTS swapped sites from Nortel,
Motorola to Huawei. Assigning Drive test plans, Analyze & Optimize poor performing cells after
BTS swap &Updating the project progress daily, weekly & monthly wise, attending meetings with
customer regarding project progress, achieving acceptance targets
Technologies : UMTS / GSM

5. Optimization RF Tools : Huawei UNet, Atool, Naster Actix Analyzer, Genex Probe 2.2 & 2.3 Genex
Assistant 2.2, MapInfo,Google Earth etc.
Responsibilities:
 Comparison of network performance after swap from Motorola & Nortel to Huawei.
 On daily basis monitored KPI for swapped sites from Motorola/Nortel to Huawei equipment
& resolved cells having poor performance.
 Implement optimization changes, verify the network performance and generate reports on
network performance and optimization process.
 Generate KPI statistics for daily/weekly report based on some major KPIs such as SDR, CDR,
AFR, CSSR, HOSR, HFR, CS, PS call volumes & Traffics.
 Identified worst performing cells and take corrective actions to meet the benchmark value.
 Ensuring cell site is on air with right parameters by conducting Single Site Verification (SSV).
 Assign drive test plans and coordinating field engineers
 Analyze Drive Test Log files and all related parameters in the core network to report to
Operator.
 Identifying Pilot polluted areas in UMTS system and interference analysis in GSM system
 Monitored performance of each site within a particular switch. Resolved issues such as high
number of dropped calls, identifying missing neighbors and RF related problems.
 GPRS/EDGE optimization, A-bis ,time slots assignment, setting EDGE configuration and
conduction drive-test and analysis
Employer: IWS Pvt Ltd
Project Title: Phase V BSNL GSM / WCDMA Project,
Designation: Sr.RF Drive test Engineer Vendor: Huawei
Duration: Jan 2010 – Jan 2011 Role: Team Member, Drive test & analysis
Project Description: Worked as Drive test Engineer in Huawei BSNL Swap & Redep Site Project in
South Tamil Nadu. Conducting & verifying Network performance in field using Drive test RF tools,
Ensuring cell sites were working properly & optimized the network with Coordination of RNO &
Offering Acceptance Testing for the Site/Cluster to the BSNL Acceptance Officer. More Than 600
Sites Acceptance Test Cleared Successfully.
Technologies : GSM ,WCDMA & CDMA/Drive test & Analysis,
Tools : Genex Probe 2.3, 2.2, Mapinfo8.5,Genex assistant, Tems Investigation,Google
Earth, etc.
Responsibilities:
 Single Site Verification and Cluster DT for new sites.
 Based on the Drive Analysis Discussing with Customer for Improvement of the Network &
Giving Bcch Bsic Changes Required to Avoid Clash & Improving the HOSR of the Network.
 Post-processing and analyzing RF drive test data on Huawei Genex Probe, Assistant Actix and
RF Planning tools like MapInfo to determine network problems, poor coverage areas,
interference, drop calls and HO problems.

6.  Cluster drive test evaluation and analysis for Rxlev, Rxqual, Voice quality, Accessibility,
Retain ability and Mobility, GPRS/EDGE throughput, recommendation of modifications to
enhance KPI's
 Cluster evaluation and analysis for Pilot Coverage, CPICH RSCP, CPICH Ec/Io, Pilot Pollution,
Accessibility, Retain ability and Mobility for Voice, CS, and PS Services and also throughput,
recommendation of modifications to enhance KPI's.
 Field optimization (change antenna types, azimuths, tilts and heights).
 Monitoring & optimizing KPI of 2G network on cell & BSC level (CSSR, CDR, HSR, H.O Failure
due to bad Quality, Interference, missing neighbor, etc).
 Responsible of data analysis on problem areas such as call drops, missing neighbor analysis
and call setup failure by analyzing layer messages on drive test log files
 Trained & mentored new engineers in processes and tool utility until they are able to deliver
the effective results.
Employer: IWS Pvt Ltd
Project Title: Kerala Aircel & Docomo Project for Huawei & NSN Docomo in Karnataka
Designation: RF Drive test Engineer Vendor: Huawei
Duration: May 2009 – Jan 2010 Role: Team Member, Drive test & analysis
Project Description: Worked as Drive test Engineer in various projects & new site roll outs for
leading mobile operators like Aircel TATA Docomo 2G in Kerala & Karnataka. Conducting & verifying
Network performance in field using Drive test RF tools, Ensuring cell sites were working properly &
optimized the network with coordination of senior engineers.
Technologies : GSM ,WCDMA Drive test & Analysis,
Tools : Genex Probe 1.5,2.2, Mapinfo8.5,Genex assistant, Tems Investigation, Google
Earth, etc.
Responsibilities:
 Single Site Verification and Cluster DT for new sites in Aircel 2G Lunching Project in Kerala
Rural Area.
 Field Audit Lat Long Ant Ht Orientation Tilt.
 Optimization based on Clutter, AMSL,Antenna Height etc.
 Orientation Planning Based on the Site is for Capacity Cell & Coverage Based Cell.
 Checking the Cable Swap for the new sites by Contacting Drive & Physical Trace with the
help of rigor.
 Contacting Drive test for coverage & quality related complaints & providing Proper Solution
for Problem.
ACADEMIC PROFILE

7.  Bachelor ofEngineering in the stream of Electronics and Communication in Arulmigu
Kalasalingam college of Engineering, Anna University, 79.34%.
 HSC from State Board in Sattur Hindu Nadar Higher Secondary School at Sattur,
March 2005, 92.16%.
 SSLC from State Board in Sattur Hindu Nadar Higher Secondary School at Sattur,
March 2003, 92.20%.
PERSONAL PROFILE
Date of Birth : 30 December 1987
Father’s Name : P.Sankara pandi
Nationality : Indian
Permanent Address : Old No 240, New No112, South North new street,
Sattur (Virudhunagar Dist).
Languages Known : English, Tamil
Hobbies : Listening music, playing cricket
DATE:
PLACE: GANESH.S