1. Gail D’Onofrio
111 College road, apt. 3Q
Selden N.Y. 11784
Cell: 631-316-7316
Email: Gdonofrio@miteq.com
SUMMARY
Professional technician with 30 years in the electronic industry. Worked closely with Engineering
to solve problems with software issues with testing of boards. Self motivated team player with
strong mechanical skills in repair and operation of manufacturing equipment. Excellent problem
solving skills.
PROFESSIONAL EXPERIENCE
Chiplogic- yaphank NY 8/14 still there
Work part time as an automatic wire bonder and future testing. Work part time for extra income.
BC Systems – 200 Belle Meade rd. setauket, N.Y. 6/5/13- 6/14
Test Operator/electrical mechanical assembler
Presently mechanically building power supplies for several units at class 3 products (military).
Solder, mechanical assembly and functional testing, ATP, calibrate units, pre alignment, pre-cap
ATP, ESS, final test.
Miteq, 330 Oser Ave Hauppauge, NY 5/2010- Present
Electronics Technician senior
Program boards, boundary scan test boards, trouble shoot boards to component level. Also fix
test fixture when they brake down. Fix boards from top level failure and also field returns. Use
test equipment to analyze failed boards, fix own boards, test fixtures, and board failures. Work
closely with engineering on complex boards, presently still working as an electronics technician.
Trained top-level system testing, manual alignments. Trained using CAD, labview programs,
voltmeters, oscilloscopes, functional generators, signal generators, spectrum analyzers,
programmed proms. Programmed Mac addresses, spreadsheets, power points, words, and other

2. programs. Tested Digital and analog, RF products, and testing of modules, tune RF filters. Also
trained other technician from top level for production functional test, also RF module testing. Lead
technician in functional test. Still working here.
Narda/Miteq an L3 Company
100 Davis Drive Hauppauge NY, 11788
Electronics technician senior
As of 1/22/15 Miteq merged with Narda/L3 Company. I am presently still working as a test
technician senior testing and troubleshooting digital boards. Same as I was no change. Same job,
which also includes floor repairs/customer return boards as well as production, boards. Also
repairing test fixtures.
National Hybrid, Ronkonkoma NY 1/2010-5/2010
Worked as a wire bounder (on manual and automatic) with temp agency until I found permanent
position as technician. Company moved out of state. Worked with semiconductors. Followed
schematics to wire microchip with 24gold. Also fixed repairs from technician.
Rockwell Collins, Melbourne, Florida 2007-2009
Avionics Electronics technician Specialist
Programmed a test to run on the Takaya machine to test PC boards used for engineering and
production. Worked closely with engineers to test, analyze and debug boards and programs to
component level.
 Received top level training to functionally test boards (RF) and Digital.
 Familiar with use oscilloscope, meters, spectrum analyzer, and others
 Representative for second shift on health and safety board
 Provided assistance to engineering development and with transition to production.
 RF and Digital Components
 VHF, Signal generators
 Pre-alignment, CATS, oven, final test, vibration test, manual and computerized alignments.
 Trouble shot system failures, also ESS burn in, ATP, pre-alignments, and vibration test.
MC Assembly, Melbourne, Florida 2003-2007
Electronics Technician
Used Hp’s (Incircuit) to test PC boards. Trouble shot boards to component level using
schematics and software. Functionally tested completed units at system level and trouble shot at
system level.
 Trained to solder and rework boards
 Able to complete large quantities of boards per day

3.  As a consultant trained others after leaving MC Assembly
 Trained to functionally test completed units
 Trained in QC to inspect boards.
 Programmed boards, and functionally tested boards at final stage. Also ran in circuit test
machine, Ginrade, HP, Takaya, 4 pin flying probe, also bed of nails test machine.
ILC DATA DEVICE Corporation Bohemia, NY 1982-1999
Used gold to wire semiconductor microchips using schematics. Tested parts to ensure proper
bonding technique.
 Performed duties in “clean room” environment, under ISO certification.
 Worked on commercial and military contracts.
 Trained as a first aid responder
 Certified in MIL-STD for commercial aerospace and for government.
Mostly used manual wire bounder and trained using automatic wire bounder also, and some test
equipment, voltmeter, etc. Also trained die bonding and die bond inspection.
DRS Technology Melbourne, Florida 4/2003-10/2003
Electronics technician
Worked for DRS as electronics technician to trouble shoot the military laptops to component level.
Fixed and troubleshot PCB boards to component level, and updated firmware and software as
needed. Soldered repairs also as needed.
EDUCATION
Suffolk Community College Selden campus 120 earned credits
Florida medical technology
TECHNICAL TRAINING
Time Management
Software programs
Emergency Medical Technician/critical care
ESD trained
ISO 9001 certified
FOD certified
REWORK & REPAIR SPECIALIST (SOLDER), BGA machine trained, and x-ray
Electronics Technician for 15 years.
VOLUNTEER ORGANIZATION
Medford ambulance