SlideShare a Scribd company logo

Appendix-1.pdf

•
•
G
GHANSHYAMGUPTA51

list of IRC Codes

Engineering
1 of 17
Download to read offline
Appendices Appendix 1 LIST OF IRC PUBLICATIONS REFERRED TO IN THE SPECIFICATIONS Number Designation Title IRC:2-1968 Route Marker Signs for National Highways (First Revision) IRC:5-1998 Standard Specifications and Code of Practice for Road Bridges, Section I – General Features of Design (Seventh Revision) IRC:6-2000 Standard Specifications and Code of Practice for Road Bridges, Section II – Loads and Stresses (Fourth Revision) IRC:8-1980 Type Designs for Highway Kilometre Stones (Second Revision) IRC:10-1961 Recommended Practice for Borrowpits for Road Embankments Constructed by Manual Operation IRC:12-2009 Guidelines for Access, Location and Layout of Roadside Fuel Stations and Service Stations (Third Revision) IRC:14-2004 Recommended Practice for Open Graded Premix Carpets (Third Revision) IRC:16-2008 Standard Specifications and Code of Practice for Prime and Tack Coat (Second Revision) IRC:17-1965 Tentative Specification for Single Coat Bituminous Surface Dressing IRC:18-2000 Design Criteria for Prestressed Concrete Road Bridges (Post-Tensioned Concrete) (Third Revision) IRC:19-2005 Standard Specification and Code of Practice for Water Bound Macadam (Third Revision) IRC:20-1966 Recommended Practice for Bituminous Penetration Macadam (Full Grout) IRC:21-2000 Standard Specifications and Code of Practice for Road Bridges, Section III – Cement Concrete (Plain and Reinforced) (Third Revision) IRC:22-2008 Standard Specifications and Code of Practice for Road Bridges, Section VI – Composite Construction (Limit States Design) (Second Revision) IRC:23-1966 Tentative Specification for Two Coat Bituminous Surface Dressing IRC:24-2001 Standard Specifications and Code of Practice for Road Bridges, Section V – Steel Road Bridges (Second Revision)
2 Number Designation Title IRC:25-1967 Type Designs for Boundary Stones IRC:26-1967 Type Design for 200-Metre Stones IRC:27-2009 Specifications for Bituminous Macadam(First Revision) IRC:29-1988 Specification for Bituminous Concrete (Asphaltic Concrete) for Road Pavement (First Revision) IRC:30-1968 Standard Letters and Numerals of Different Heights for Use on Highway Signs IRC:35-1997 Code of Practice for Road Markings (with Paints) (First Revision) IRC:36-1970 Recommended Practice for Construction of Earth Embankments for Road Works IRC:37-2001 Guidelines for the Design of Flexible Pavements (Second Revision) IRC:40-2002 Standard Specifications and Code of Practice for Road Bridges, Section IV – (Brick, Stone and Block Masonry) (Second Revision) IRC:45-1972 Recommendations for Estimating the Resistance of Soil Below the Maximum Scour Level in the Design of Well Foundations of Bridges IRC:47-1972 Tentative Specification for Built-up Spray Grout IRC:48-1972 Tentative Specification for Bituminous Surface Dressing Using Precoated Aggregates IRC:50-1973 Recommended Design Criteria for the Use of Cement Modified Soil in Road Construction IRC:51-1992 Guidelines for the Use of Soil Lime Mixes in Road Construction (First Revision) IRC:56-1974 Recommended Practice for Treatment of Embankment Slopes for Erosion Control IRC:63-1976 Tentative Guidelines for the Use of Low Grade Aggregates and Soil Aggregates Mixtures in Road Pavement Construction IRC:67-2001 Code of Practice for Road Signs (First Revision) IRC:72-1978 Recommended Practice for Use and Upkeep of Equipment, Tools and Appliances for Bituminous Pavement Construction IRC:75-1979 Guidelines for the Design of High Embankments
3 Number Designation Title IRC:78-2000 Standard Specifications and Code of Practice for Road Bridges, Section VII – Foundations and Substructure (Second Revision) IRC:79-1981 Recommended Practice for Road Delineators IRC:82-1982 Code of Practice for Maintenance of Bituminous Surfaces of Highways IRC:83-1999(Part-I) Standard Specifications and Code of Practice for Road Bridges, Section IX – Bearings, Part I : Metallic Bearings (First Revision) IRC:83-1987(Part II) Standard Specifications and Code of Practice for Road Bridges, Section IX – Bearings, Part II: Elastomeric Bearings IRC:87-1984 Guidelines for the Design and Erection of Falsework for Road Bridges IRC:89-1997 Guidelines for Design and Construction of River Training & Control Works for Road Bridges (First Revision) IRC:90-1985 Guidelines of Selection, Operation and Maintenance of Bituminous Hot Mix Plant IRC:93-1985 Guidelines on Design and Installation of Road Traffic Signals IRC:111-2009 Specifications for Dense Graded Bituminous Mixes IRC:SP:11-1984 Handbook of Quality Control for Construction of Roads and Runways (Second Revision) IRC:SP:21-2009 Guidelines for Landscaping and Tree Plantation (First Revision) IRC:SP:30-2009 Manual on Economic Evaluation of Highway Projects in India (Second Revision) IRC:SP:31-1992 New Traffic Signs IRC:SP:53-2002 Guidelines on Use of Polymer and Rubber Modified Bitumen in Road Construction (First Revision) IRC:SP:55-2001 Guidelines for Safety in Construction Zones IRC:SP:58-2001 Guidelines for Use of Flyash in Road Embankments IRC:SP:59-2002 Guidelines for Use of Geotextiles in Road Pavements and Associated Works IRC:SP:60-2002 An Approach Document for Assessment of Remaining Life of Concrete Bridges IRC:SP:61-2004 AnApproach Document on Whole Life Costing for Bridges in India
4 Number Designation Title IRC:SP:62-2004 Guidelines for the Design and Construction of Cement Concrete Pavement for Rural Roads IRC:SP:63-2004 Guidelines for the Use of Interlocking Concrete Block Pavement IRC:SP:64-2005 Guidelines for the Analysis and Design of Cast-in-Place Voided Slab Superstructure IRC:SP:65-2005 Guidelines for Design and Construction of Segmental Bridges IRC:SP:66-2005 Guidelines for Design of Continuous Bridges IRC:SP:67-2005 Guidelines for Use of External and Unbonded Prestressing Tendons in Bridge Structures IRC:SP:68-2005 Guidelines for Construction of Roller Compacted Concrete Pavements IRC:SP:69-2005 Guidelines & Specifications for Expansion Joints IRC:SP:70-2005 Guidelines for the Use of High Performance Concrete in Bridges IRC:SP:71-2006 Guidelines for Design and Construction of Pretensioned Grider of Bridges IRC:SP:74-2007 Guidelines for Repair and Rehabilitation of Steel Bridges IRC:SP:75-2008 Guidelines for Retrofitting of Steel Bridges by Prestressing IRC:SP:76-2008 Tentative Guidelines for Conventional, Thin and Ultra Thin Whitetopping IRC:SP:78-2008 Specifications for Mix Seal Surfacing (MSS) Close-Graded Premix Surfacing (CGPS) IRC:SP:79-2008 Tentative Specifications for Stone MatrixAsphalt IRC:SP:80-2008 Guidelines for Corrosion Prevention, Monitoring and Remedial Measures for Concrete Bridge Structures IRC:SP:81-2008 Tentative Specification for Slurry Seal and Microsurfacing IRC:SP:83-2008 Guidelines for Maintenance, Repairs & Rehabilitation of Cement Concrete Pavements Ministry of Shipping &Transport (Roads Wing) Handbook on Road Construction Machinery HRB SR.No.11, 1992 State of the Art: Granular and Bound Bases and Sub-Bases
5 Appendix-2 LIST OF INDIAN AND FOREIGN STANDARDS REFERRED TO IN THE SPECIFICATIONS Number Designation Title (A) INDIAN STANDARDS IS:5-2004 Colour for ready mixed paints and enamels (Fifth revision) IS:73-2006 Viscosity Grade Bitumen Specifications IS:164-1981 Ready mixed paints, brushing, for road marking, to Indian Standard Colour No.356 Golden yellow, white and black IS:210-1993 Grey iron castings (fourth revision) IS:215-1995 Road tar specification (third revision) IS:217-1988 Specification for Cutback Bitumen (second revision) IS:269-1989 Specification for 33 grade ordinary Portland cement (fourth revision) IS:278-1978 Specification for Galvanized steel barbed wire for fencing (third revision) IS:280-2006 Specification for Mild steel wire for general engineering purposes (fourth revision) IS:334-2002 Glossary of terms relating to bitumen and tar (third revision) IS:383-1970 Specification for Coarse and fine aggregates from natural sources for concrete (second revision) IS:432-1982 Mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement Part I Specification for Mild steel and medium tensile steel bars (third revision) Part II Hard-drawn steel wire (third revision) IS:443-1975 Methods of sampling and test for rubber hoses (second revision) IS:454-1994 Specification for Cutback bitumen from Waxy Crude- Specification (second revision) IS:455-1989 Specification for Portland stag cement (fourth revision) IS:456-2000 Plain and reinforced concrete – Code of Practice (Fourth revision)
6 Number Designation Title IS:458-2003 Precast Concrete pipes (with and without reinforcement) – specification (third revision) IS:460-1985 Specification for test sieves: IS:508-1987 Specification grease graphited (fourth revision) IS:516-1959 Methods of test for strength of concrete IS:702-1988 Industrial bitumen (second revision) IS:736-1986 Wrought aluminium and aluminium alloys, plates for general engineering purposes (third revision) IS:814-2004 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel (sixth revision) IS:1030-1998 Carbon steel castings for general engineering purposes (fifth revision) IS:1077-1992 Common burnt clay building bricks (fifth revision) IS:1124-1974 Method of test for water absorption apparent specific gravity and porosity of natural building stones (first revision) IS:1129-1972 Dressing of natural building stones (first revision) IS:1148-1982 Hot rolled rivet bars (upto 40 mm dia) for structural purposes (third revision) IS:1149-1982 High tensile rivet bars for structural purposes (third revision) IS:1195-2002 Bitumen mastic for flowing (second revision) IS:1199-1959 Method of sampling and analysis of concrete IS:1201:1978 Sampling – (see IS:1201 to IS:1220) IS:1203-1978 Determination of penetration (first revision) (see IS:1201 to IS:1220) IS:1205-1978 Determination of softening point (first revision) (see IS:1201 to IS:1220) IS:1206 : Part 1 : 1978 Determination of viscosity: Part 1 Industrial viscosity - (see IS 1201 to IS 1220) IS:1206 : Part 2 : 1978 Determination of viscosity: Part 2 Absolute viscosity - (see IS 1201 to IS 1220) IS:1206 : Part 3 : 1978 Determination of viscosity: Part 3 Kinematic viscosity - (see IS 1201 to IS 1220)
7 Number Designation Title IS:1208-1978 Determination of ductility (first revision) (see IS:1201 to IS:1220) IS:1209-1978 Determination of flast point and fire point (first revision) (see IS:1201 to IS:1220) IS:1212-1978 Determination of loss on heating (first revision) IS:1216-1978 Determination of solubility in carbon disulphide trichoroethylene (first revision) IS:1217-1978 Determination of mineral matter ash) (first revision) (see IS:1201 to IS:1220) IS 1239 : Part 1 : 2004 Steel Tubes, Tubulars and Other Wrought Steel Fittings - Specification - Part 1 : Steel Tubes IS 1239 : Part 2 : 1992 Mild steel tubes, tubulars and other wrought steel fittings, Part 2 Mild steel tubulars and other wrought steel pipe fittings IS 1364 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 1 : Hexagon Head Bolts (Size Range M 1.6 to M 64) IS 1364 : Part 2 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 2 : Hexagon Head Screws (Size Range M 1.6 to M 64) IS 1364 : Part 3 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 3 : Hexagon Nuts, Style 1 (Size Range M 1.6 to M 64) IS 1364 : Part 4 : 2003 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 4 : Hexagon Thin Nuts (Chamfered) (Size Range M1.6 to M64) IS 1364 : Part 5 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 5 : Hexagon Thin Nuts - Product Grade B (Unchamfered) (Size Range M 1.6 to M 10) IS 1364 : Part 6 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades Aand B - Part 6 : Hexagon Nuts, Style 2 IS 1367 : 2002 (Part 1 to 20) Technical Supply Conditions for Threaded Steel Fasteners IS:1387-1993 General requirements for the supply of metallurgical materials (second revision)
8 Number Designation Title IS:1398-1982 Packing paper, waterproof, bitumen-laminated (second revision) IS: 1448 (Part 1 to 152) Methods of Test for Petroleum and its Products IS:1477 Code of practice for painting of ferrous metals in buildings Part 1-1971 Pretreatment (first revision) Part 2-1971 Painting (first revision) IS:1489-1991 Specification for Portland-pozzolana cement Part 1 Flyash based (third revision) Part 2 Calcined clay based (third revision) IS:1498-1970 Classification and identification of soils for general engineering purposes (first revision) IS:1514-1990 Methods of sampling and test for quick lime and hydrated lime (first revision) IS:1732-1989 Dimensions for round and square steel bars for structural and general engineering purposes (second revision0 IS:1785-1983 Plain hard-drawn steel wire for prestressed concrete Part I Cold-draws stress relieved wire (second revision) Part II As drawn wire IS:1786-1985 High strength deformed steel bars and wires for concrete reinforcement (third revision) IS 1838 : Part 1 : 1983 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient type): Part 1 Bitumen impregnated fibre IS 1838 : Part 2 : 1984 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient type) Part 2 CNSLAldehyde resin and coconut pith IS:1888-1982 Method of load tests on soils (second revision) IS:2004-1991 Carbon steel forging for general engineering purposes (third revision) IS:2062-2006 Steel to general structural purpose (fifth revision) IS:2116-1980 Sand for masonry mortars (first revision) IS:2131-1981 Methods for standard penetration test for soils (first revision)
9 Number Designation Title IS:2250-1981 Code of practice for preparation and use of masonry mortars (first revision) IS:2386-1963 Methods of test for aggregates for concrete Part 1 Particle size and shape Part 2 Estimation of deleterious materials and organic impurities Part 3 Specific gravity, density, voids, absorption and bulking Part 4 Mechanical properties Part 5 Soundness Part 6 Measuring mortar making properties of fine aggregates Part 7 Alkali – aggregate reactivity Part 8 Petrographic examination IS:2720 Methods of test for soils Part 2-1973 Determination of water content (second revision) Part 3-1980 Determination of specific gravity (first revision) Section I Fine grained soils Section II Medium and coarse grained soils Part 4-1985 Grain size analysis (second revision) Part 5-1985 Determination of liquid and plastic limits (second revision) Part 7-1980 Determination of moisture content/dry density relation using light compaction (second revision) Part 8-1983 Determination of water content-dry density relation using heavy compaction (second revision) Part 10-1991 Determination of unconfined compressive strength (second revision0 Part 13-1986 Direct shear test (second revision) Part 14-1983 Determination of density index (relative density of cohesionless soils (first revision) Part 16-1987 Laboratory determination of CBR (second revision) Part 27-1977 Determination of total soluble sulphates (first revision) Part 28-1974 Determination of dry density of soils in-place by the sand replacement method (first revision)
10 Number Designation Title Part 29-1975 Determination of dry density of soils in-place by core cutter method (first revision0 Part 37-1976 Determination of sand equivalent values of soils and fine aggregates Part 40-1977 Determination of free swell index of soils IS 3117 : 2004 Bitumen Emulsion for Roads and Allied Applications (Anionic Type) - Specification IS:3466-1988 Specification for Masonry cement (second revision) IS:3764-1992 Code of safety for excavation work (first revision) IS:4138-1977 Safety code for working in compressed air (first revision) IS:4332 Method of test for stabilized soils Part I-1967 Methods of sampling and preparation of stabilized soils for testing Part 3-1967 Test for determination of moisture content-dry density relation for stabilized soil mixtures Part 4-1968 Wetting and drying and, freezing and thawing tests for compacted soil-cement mixtures Part 5-1970 Determination of unconfined compressive strength of stabilized soil Part 7-1973 Determination of cement content of cement stabilized soils Part 8-1969 Determination of lime content of lime stabilized soils IS:4434-1978 Code of practice for in-situ vane shear test for soils (first revision) IS:4826-1979 Hot dipped galvanized coating on round steel wires (first revision) IS:5317-2002 Pitch mastic for bridge decking and Roads - specifications IS:5435-1987 General requirements for cold asphalt macadam mixing plants (first revision) IS:5640-1970 Method for determining the aggregate impact value of soft coarse aggregate IS:6006-1983 Uncoated stress relieved strands
11 Number Designation Title IS:6241-1971 Methods of test for determination of stripping value of road aggregates IS:6909-1990 Supersulphated cement IS:6925-1973 Methods of test for determination of water soluble chlorides in concrete admixtures IS:7537-1974 Road traffic signals IS:7623-1993 Specification for li thium base grease for industrial purposes (second revision) IS:8041-1990 Rapid hardening Portland cement (second revision) IS:8112-1989 43 grade ordinary Portland cement (first revision) IS:8500-1991 Structural steel – microalloyed (medium and high strength qualities (first revision) IS:8887-2004 Bitumen emulsion for roads (cationic type) – specification (second revision) IS:9103-1999 Admixtures for concrete (first revision) IS:9381-1979 Methods of testing tar and bituminous materials: determination of frass breaking point of bitumen IS:9382-1979 Methods of testing tar and bituminous materials: determination of effect of heat and iar by thin film oven tests IS:10262-2004 Guidelines for concrete mix design IS:12269-1987 Specification for 53 grade ordinary Portland cement IS:12330-1988 Specification for sulphate resisting Portland cement IS:13321 (Part I)-1992 Glossary of terms for geosynthetics, part 1: terms used in materials and properties IS:13325-1992 Determination of tensile properties of extruded polymer geogrids using the wide strip-test method IS:13326 (Part I)-1992 Evaluation of interface friction between geosynthetics and soil-method of test, part 1: modified direct shear technique IS:SP 23-1982 Handbook on concrete mixes (B) FOREIGN STANDARDS ASTM D36 - 06 Standard Test Method for Softening Point of Bitumen (Ring-and-BallApparatus)
12 Number Designation Title ASTM D395 - 03(2008) Standard Test Methods for Rubber Property—Compression Set ASTM D412 - 06ae2 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension ASTM D429 - 08 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates ASTM D573 - 04 Standard Test Method for Rubber—Deterioration in an Air Oven ASTM D624 - 00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers ASTM D664 - 09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration ASTM D797-82(1989) Test Method for Rubber Property-Young’s Modulus at Normal and Subnormal Temperatures (Withdrawn 1994) Withdrawn Standard: ASTM D977 - 05 Standard Specification for Emulsified Asphalt ASTM D979 - 01(2006)e1 Standard Practice for Sampling Bituminous Paving Mixtures ASTM D1075 - 07 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures ASTM D1149 - 07 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment ASTM D1559-89 Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Withdrawn 1998) Withdrawn Standard: ASTM D2026 - 97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type) ASTM D2027 - 97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type) ASTM D2041 - 03a Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures ASTM D2172 - 05 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures ASTM D2240 - 05 Standard Test Method for Rubber Property— Durometer Hardness
13 Number Designation Title ASTM D2397 - 05 Standard Specification for Cationic Emulsified Asphalt ASTM D3203 - 05 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures ASTM D3625 - 96(2005) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water ASTM D3910 - 07 Standard Practices for Design, Testing, and Construction of Slurry Seal ASTM D4533 - 04 Standard Test Method for Trapezoid Tearing Strength of Geotextiles ASTM D5976-96 Standard Specification for Type I Polymer ModifiedAsphalt Cement for Use in Pavement Construction –SUPERSEDED ASTM E11 - 04 Standard Specification for Wire Cloth and Sieves for Testing Purposes ASTM E810 - 03(2008) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry AASHTO : T283-07-UL Standard Method of Test for Resistance of Compacted Hot MixAsphalt (HMA) to Moisture-Induced Damage, Single User Digital Publication AASHTO : M294-08-UL Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter, Single User Digital Publication AASHTO :M288-06-UL Standard Specification for Geotextile Specification for Highway Applications, Single User Digital Publication AASHTO :M017-07-UL Standard Specification for Mineral Filler for Bituminous Paving Mixtures AASHTO : R005-08-UL Standard Recommended Practice for Selection and Use of Emulsified Asphalts AASHTO : M081-92-UL Standard Specification for Cutback Asphalt (Rapid-Curing Type), Single User Digital Publication AASHTO : M082-75 Standard Specification for Cut-back asphalt (Medium-curing type) AASHTO : M140-03-UL Standard Specification for Emulsified Asphalt AASHTO : M57-80 Materials for embankments and subgrades AASHTO : M147-65 Materials for aggregate and soil-aggregate sub-base, base and surface courses
14 Number Designation Title AASHTO : M216-05-UL Standard Specification for Lime for Soil Stabilization, Single User Digital Publication AASHTO : M249-08-UL Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form), Single User Digital Publication AASHTO : M268-08-UL Standard Specification for Retroreflective Sheeting for Traffic Control AASHTO : M282-99-UL Standard Specification for Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements AASHTO : M082-75-UL Standard Specification for Cutback Asphalt (Medium-Curing Type), Single User Digital Publication AASHTO : M140-03-UL Standard Specification for Emulsified Asphalt AASHTO : M208-01-UL Standard Specification for Cationic Emulsified Asphalt, Single User Digital Publication AASHTO : T182-84-UL Standard Method of Test for Coating and Stripping of Bitumen-Aggregate Mixtures AASHTO : T283-07-UL Standard Method of Test for Resistance of Compacted Hot MixAsphalt (HMA) to Moisture-Induced Damage, Single User Digital Publication BS : 410-2005 Test sieves – Technical requirements and Testing Part 1 Test sieves of metal wire cloth Part 2 Test sieves of perforated Metal plate BS : 434 Bitumen road emulsions (anionic and cationic) Part 2 : 1984 Specification for bitumen road emulsion Part 2:2006 Code of practice for the use of cationic bitumen emulsions on roads and other paved areas BS : 598 Sampling and examination of bituminous mixtures for roads and other paved areas Part 104:1987 Methods of test for the determination of the density and compaction Part 107:1990 Method of test for the determination of the composition of design wearing course rolled asphalt BS : 729-1971 Hot dip galvanized coating on iron and steel articles
15 Number Designation Title BS : 812-1995 Testing aggregates Part 2 Methods for determination of Density Part 3-75 Methods for determination of mechanical properties Part 111-90 Method for determination of ten per cent: fines value (TFV) Part 114-1989 Method for determination of the polished-stone value BS : 1047-1983 Specification for Air-cooled blast furnace-slag aggregate for use in construction BS : 1154-2003 Natural rubber compounds – specifications BS : 1377-1990 Methods of test for soils for civil engineering purposes BS : 1447-1988 Mastic asphalt (limestone fine aggregates) for roads and footways and pavings in buildings BS : 1449-1956 Steel plate, sheet and strip Part 1-1991 Carbon steel plate, sheet and strip Part 2-2008 Stainless and heat resisting plate, sheet and strip BS : 1470-1987 Wrought aluminium and aluminium alloys for general engineering purposes – plate, sheet and strip BS : 2000 Methods of test for petroleum and its products Part 397:1995 Recovery of bitumen binders-dichloromethane extraction rotary film evaporator method – Withdrawn on 1.11.2007 BS : 2630-1982 Specification for resistance projection welding of uncoated low carbon steel sheet and strip using embossed projections BS : 2870-1980 Rolled copper and copper alloys : sheet, strip and foil BS : 3262 Hot-applied thermoplastic road marking materials Part 1-1989 Specification for constituent materials and mixtures Part 2-1999 Specification for road performance Part 3-1989 Specification for application of material to road surface BS : 5212:Part 2-1990 Code of practice for the application and use of joint sealants BS : 6044-1987 Specification for pavement marking paints BS : 6088-1981 Specification for solid glass beads for use with road marking compounds and for other industrial uses
16 Number Designation Title BS : 6906 Methods of test for geotextiles Part 1-1987 Determination of tensile properties using a wide width strip Part 2-1989 Determination of the apparent pore size distribution by dry sieving Part 3-1989 Determination of water flow normal to the plane of the geotextile under a constant head Part 4-1990 Determination of the puncture resistance 9CBR puncture test) Part 7-1990 Determination of in-plane waterflow BS : 7542-1992 Method of test curing compound for concrete CRRI & IOC, New Delhi Bituminous road construction handbook BS : DD232-2006 Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage MS-4 (7th edition) The asphalt handbook (Asphalt Institute) MS-2 (6th edition) Mix design methods for asphalt concrete and other hot-mix types (Asphalt Institute) MS-14 (3rd edition) Asphalt Cold Mix Manual (Asphalt Institute) GRI-GG1 Geogrid rib tensile strength (Geosynthetic Research Institute) GRI-GG2 Geogrid junction strength (Geosynthetic Research Institute) GRI-GG3 Tensile creep testing of geogrids (Geosynthetic Research Institute)
17

Recommended

1332
13321332
1332Boopathi Yoganathan
 
Irccode
IrccodeIrccode
IrccodeRathin Rakshit
 
6041
60416041
6041Boopathi Yoganathan
 
1237
12371237
1237Boopathi Yoganathan
 
5751
57515751
5751Boopathi Yoganathan
 
2193
21932193
2193Boopathi Yoganathan
 
CBCODE.pdf
CBCODE.pdfCBCODE.pdf
CBCODE.pdfgopalsudhir2
 
783
783783
783Boopathi Yoganathan
 

Recommended

1332
13321332
1332Boopathi Yoganathan
 
Irccode
IrccodeIrccode
IrccodeRathin Rakshit
 
6041
60416041
6041Boopathi Yoganathan
 
1237
12371237
1237Boopathi Yoganathan
 
5751
57515751
5751Boopathi Yoganathan
 
2193
21932193
2193Boopathi Yoganathan
 
CBCODE.pdf
CBCODE.pdfCBCODE.pdf
CBCODE.pdfgopalsudhir2
 
783
783783
783Boopathi Yoganathan
 
Is code 3370
Is code 3370Is code 3370
Is code 3370Prem BIHARI Goswami
 
1785 2
1785 21785 2
1785 2Boopathi Yoganathan
 
IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1Pritesh Parmar
 
9459
94599459
9459Boopathi Yoganathan
 
6509
65096509
6509Boopathi Yoganathan
 
Village networking ppt
Village networking pptVillage networking ppt
Village networking pptPatel Tapan
 
432 1
432 1432 1
432 1Boopathi Yoganathan
 
3370 4
3370 43370 4
3370 4Boopathi Yoganathan
 
5820
58205820
5820Boopathi Yoganathan
 
4996
49964996
4996Boopathi Yoganathan
 
2751
27512751
2751Boopathi Yoganathan
 
1786
17861786
1786Boopathi Yoganathan
 
2185 2
2185 22185 2
2185 2Boopathi Yoganathan
 
3370 2
3370 23370 2
3370 2Boopathi Yoganathan
 
mort.250.2013.pdf
mort.250.2013.pdfmort.250.2013.pdf
mort.250.2013.pdflokeshnandina
 
5 (1)
5 (1)5 (1)
5 (1)ರಾಜು ತೊರವಿ
 
2911 1 2
2911 1 22911 1 2
2911 1 2Boopathi Yoganathan
 
3370 3
3370 33370 3
3370 3Boopathi Yoganathan
 
2502
25022502
2502Boopathi Yoganathan
 
4350
43504350
4350Boopathi Yoganathan
 
Online electricity billing project report..pdf
Online electricity billing project report..pdfOnline electricity billing project report..pdf
Online electricity billing project report..pdfKamal Acharya
 
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak HamilCara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak HamilCara Menggugurkan Kandungan 087776558899
 

More Related Content

Similar to Appendix-1.pdf

IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1Pritesh Parmar
 
Village networking ppt
Village networking pptVillage networking ppt
Village networking pptPatel Tapan
 

Similar to Appendix-1.pdf (20)

Is code 3370
Is code 3370Is code 3370
Is code 3370
 
1785 2
1785 21785 2
1785 2
 
IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1IS CODE LIST FOR CIVIL ENGINEERS -1
IS CODE LIST FOR CIVIL ENGINEERS -1
 
9459
94599459
9459
 
6509
65096509
6509
 
Village networking ppt
Village networking pptVillage networking ppt
Village networking ppt
 
432 1
432 1432 1
432 1
 
3370 4
3370 43370 4
3370 4
 
5820
58205820
5820
 
4996
49964996
4996
 
2751
27512751
2751
 
1786
17861786
1786
 
2185 2
2185 22185 2
2185 2
 
3370 2
3370 23370 2
3370 2
 
mort.250.2013.pdf
mort.250.2013.pdfmort.250.2013.pdf
mort.250.2013.pdf
 
5 (1)
5 (1)5 (1)
5 (1)
 
2911 1 2
2911 1 22911 1 2
2911 1 2
 
3370 3
3370 33370 3
3370 3
 
2502
25022502
2502
 
4350
43504350
4350
 

Recently uploaded

Online electricity billing project report..pdf
Online electricity billing project report..pdfOnline electricity billing project report..pdf
Online electricity billing project report..pdfKamal Acharya
 
Thermal Engineering Unit - I & II . ppt
Thermal Engineering Unit - I & II . pptThermal Engineering Unit - I & II . ppt
Thermal Engineering Unit - I & II . pptDineshKumar4165
 
COST-EFFETIVE and Energy Efficient BUILDINGS ptx
COST-EFFETIVE and Energy Efficient BUILDINGS ptxCOST-EFFETIVE and Energy Efficient BUILDINGS ptx
COST-EFFETIVE and Energy Efficient BUILDINGS ptxJIT KUMAR GUPTA
 
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...drmkjayanthikannan
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptDineshKumar4165
 
Computer Networks Basics of Network Devices
Computer Networks Basics of Network DevicesComputer Networks Basics of Network Devices
Computer Networks Basics of Network DevicesChandrakantDivate1
 
Moment Distribution Method For Btech Civil
Moment Distribution Method For Btech CivilMoment Distribution Method For Btech Civil
Moment Distribution Method For Btech CivilVinayVitekari
 
Standard vs Custom Battery Packs - Decoding the Power Play
Standard vs Custom Battery Packs - Decoding the Power PlayStandard vs Custom Battery Packs - Decoding the Power Play
Standard vs Custom Battery Packs - Decoding the Power PlayEpec Engineered Technologies
 
Wadi Rum luxhotel lodge Analysis case study.pptx
Wadi Rum luxhotel lodge Analysis case study.pptxWadi Rum luxhotel lodge Analysis case study.pptx
Wadi Rum luxhotel lodge Analysis case study.pptxNadaHaitham1
 
Thermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VThermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VDineshKumar4165
 
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptx
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptxA CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptx
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptxmaisarahman1
 
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdfAldoGarca30
 
Online food ordering system project report.pdf
Online food ordering system project report.pdfOnline food ordering system project report.pdf
Online food ordering system project report.pdfKamal Acharya
 
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptx
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptxOrlando’s Arnold Palmer Hospital Layout Strategy-1.pptx
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptxMuhammadAsimMuhammad6
 
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"
"Lesotho Leaps Forward: A Chronicle of Transformative Developments""Lesotho Leaps Forward: A Chronicle of Transformative Developments"
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"mphochane1998
 
Block diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptBlock diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptNANDHAKUMARA10
 
DC MACHINE-Motoring and generation, Armature circuit equation
DC MACHINE-Motoring and generation, Armature circuit equationDC MACHINE-Motoring and generation, Armature circuit equation
DC MACHINE-Motoring and generation, Armature circuit equationBhangaleSonal
 
kiln thermal load.pptx kiln tgermal load
kiln thermal load.pptx kiln tgermal loadkiln thermal load.pptx kiln tgermal load
kiln thermal load.pptx kiln tgermal loadhamedmustafa094
 
Hostel management system project report..pdf
Hostel management system project report..pdfHostel management system project report..pdf
Hostel management system project report..pdfKamal Acharya
 

Recently uploaded (20)

Online electricity billing project report..pdf
Online electricity billing project report..pdfOnline electricity billing project report..pdf
Online electricity billing project report..pdf
 
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak HamilCara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
Cara Menggugurkan Sperma Yang Masuk Rahim Biyar Tidak Hamil
 
Thermal Engineering Unit - I & II . ppt
Thermal Engineering Unit - I & II . pptThermal Engineering Unit - I & II . ppt
Thermal Engineering Unit - I & II . ppt
 
COST-EFFETIVE and Energy Efficient BUILDINGS ptx
COST-EFFETIVE and Energy Efficient BUILDINGS ptxCOST-EFFETIVE and Energy Efficient BUILDINGS ptx
COST-EFFETIVE and Energy Efficient BUILDINGS ptx
 
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...
Unit 4_Part 1 CSE2001 Exception Handling and Function Template and Class Temp...
 
Thermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.pptThermal Engineering -unit - III & IV.ppt
Thermal Engineering -unit - III & IV.ppt
 
Computer Networks Basics of Network Devices
Computer Networks Basics of Network DevicesComputer Networks Basics of Network Devices
Computer Networks Basics of Network Devices
 
Moment Distribution Method For Btech Civil
Moment Distribution Method For Btech CivilMoment Distribution Method For Btech Civil
Moment Distribution Method For Btech Civil
 
Standard vs Custom Battery Packs - Decoding the Power Play
Standard vs Custom Battery Packs - Decoding the Power PlayStandard vs Custom Battery Packs - Decoding the Power Play
Standard vs Custom Battery Packs - Decoding the Power Play
 
Wadi Rum luxhotel lodge Analysis case study.pptx
Wadi Rum luxhotel lodge Analysis case study.pptxWadi Rum luxhotel lodge Analysis case study.pptx
Wadi Rum luxhotel lodge Analysis case study.pptx
 
Thermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - VThermal Engineering-R & A / C - unit - V
Thermal Engineering-R & A / C - unit - V
 
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptx
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptxA CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptx
A CASE STUDY ON CERAMIC INDUSTRY OF BANGLADESH.pptx
 
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf
1_Introduction + EAM Vocabulary + how to navigate in EAM.pdf
 
Online food ordering system project report.pdf
Online food ordering system project report.pdfOnline food ordering system project report.pdf
Online food ordering system project report.pdf
 
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptx
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptxOrlando’s Arnold Palmer Hospital Layout Strategy-1.pptx
Orlando’s Arnold Palmer Hospital Layout Strategy-1.pptx
 
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"
"Lesotho Leaps Forward: A Chronicle of Transformative Developments""Lesotho Leaps Forward: A Chronicle of Transformative Developments"
"Lesotho Leaps Forward: A Chronicle of Transformative Developments"
 
Block diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.pptBlock diagram reduction techniques in control systems.ppt
Block diagram reduction techniques in control systems.ppt
 
DC MACHINE-Motoring and generation, Armature circuit equation
DC MACHINE-Motoring and generation, Armature circuit equationDC MACHINE-Motoring and generation, Armature circuit equation
DC MACHINE-Motoring and generation, Armature circuit equation
 
kiln thermal load.pptx kiln tgermal load
kiln thermal load.pptx kiln tgermal loadkiln thermal load.pptx kiln tgermal load
kiln thermal load.pptx kiln tgermal load
 
Hostel management system project report..pdf
Hostel management system project report..pdfHostel management system project report..pdf
Hostel management system project report..pdf
 

Appendix-1.pdf

  • 1. Appendices Appendix 1 LIST OF IRC PUBLICATIONS REFERRED TO IN THE SPECIFICATIONS Number Designation Title IRC:2-1968 Route Marker Signs for National Highways (First Revision) IRC:5-1998 Standard Specifications and Code of Practice for Road Bridges, Section I – General Features of Design (Seventh Revision) IRC:6-2000 Standard Specifications and Code of Practice for Road Bridges, Section II – Loads and Stresses (Fourth Revision) IRC:8-1980 Type Designs for Highway Kilometre Stones (Second Revision) IRC:10-1961 Recommended Practice for Borrowpits for Road Embankments Constructed by Manual Operation IRC:12-2009 Guidelines for Access, Location and Layout of Roadside Fuel Stations and Service Stations (Third Revision) IRC:14-2004 Recommended Practice for Open Graded Premix Carpets (Third Revision) IRC:16-2008 Standard Specifications and Code of Practice for Prime and Tack Coat (Second Revision) IRC:17-1965 Tentative Specification for Single Coat Bituminous Surface Dressing IRC:18-2000 Design Criteria for Prestressed Concrete Road Bridges (Post-Tensioned Concrete) (Third Revision) IRC:19-2005 Standard Specification and Code of Practice for Water Bound Macadam (Third Revision) IRC:20-1966 Recommended Practice for Bituminous Penetration Macadam (Full Grout) IRC:21-2000 Standard Specifications and Code of Practice for Road Bridges, Section III – Cement Concrete (Plain and Reinforced) (Third Revision) IRC:22-2008 Standard Specifications and Code of Practice for Road Bridges, Section VI – Composite Construction (Limit States Design) (Second Revision) IRC:23-1966 Tentative Specification for Two Coat Bituminous Surface Dressing IRC:24-2001 Standard Specifications and Code of Practice for Road Bridges, Section V – Steel Road Bridges (Second Revision)
  • 2. 2 Number Designation Title IRC:25-1967 Type Designs for Boundary Stones IRC:26-1967 Type Design for 200-Metre Stones IRC:27-2009 Specifications for Bituminous Macadam(First Revision) IRC:29-1988 Specification for Bituminous Concrete (Asphaltic Concrete) for Road Pavement (First Revision) IRC:30-1968 Standard Letters and Numerals of Different Heights for Use on Highway Signs IRC:35-1997 Code of Practice for Road Markings (with Paints) (First Revision) IRC:36-1970 Recommended Practice for Construction of Earth Embankments for Road Works IRC:37-2001 Guidelines for the Design of Flexible Pavements (Second Revision) IRC:40-2002 Standard Specifications and Code of Practice for Road Bridges, Section IV – (Brick, Stone and Block Masonry) (Second Revision) IRC:45-1972 Recommendations for Estimating the Resistance of Soil Below the Maximum Scour Level in the Design of Well Foundations of Bridges IRC:47-1972 Tentative Specification for Built-up Spray Grout IRC:48-1972 Tentative Specification for Bituminous Surface Dressing Using Precoated Aggregates IRC:50-1973 Recommended Design Criteria for the Use of Cement Modified Soil in Road Construction IRC:51-1992 Guidelines for the Use of Soil Lime Mixes in Road Construction (First Revision) IRC:56-1974 Recommended Practice for Treatment of Embankment Slopes for Erosion Control IRC:63-1976 Tentative Guidelines for the Use of Low Grade Aggregates and Soil Aggregates Mixtures in Road Pavement Construction IRC:67-2001 Code of Practice for Road Signs (First Revision) IRC:72-1978 Recommended Practice for Use and Upkeep of Equipment, Tools and Appliances for Bituminous Pavement Construction IRC:75-1979 Guidelines for the Design of High Embankments
  • 3. 3 Number Designation Title IRC:78-2000 Standard Specifications and Code of Practice for Road Bridges, Section VII – Foundations and Substructure (Second Revision) IRC:79-1981 Recommended Practice for Road Delineators IRC:82-1982 Code of Practice for Maintenance of Bituminous Surfaces of Highways IRC:83-1999(Part-I) Standard Specifications and Code of Practice for Road Bridges, Section IX – Bearings, Part I : Metallic Bearings (First Revision) IRC:83-1987(Part II) Standard Specifications and Code of Practice for Road Bridges, Section IX – Bearings, Part II: Elastomeric Bearings IRC:87-1984 Guidelines for the Design and Erection of Falsework for Road Bridges IRC:89-1997 Guidelines for Design and Construction of River Training & Control Works for Road Bridges (First Revision) IRC:90-1985 Guidelines of Selection, Operation and Maintenance of Bituminous Hot Mix Plant IRC:93-1985 Guidelines on Design and Installation of Road Traffic Signals IRC:111-2009 Specifications for Dense Graded Bituminous Mixes IRC:SP:11-1984 Handbook of Quality Control for Construction of Roads and Runways (Second Revision) IRC:SP:21-2009 Guidelines for Landscaping and Tree Plantation (First Revision) IRC:SP:30-2009 Manual on Economic Evaluation of Highway Projects in India (Second Revision) IRC:SP:31-1992 New Traffic Signs IRC:SP:53-2002 Guidelines on Use of Polymer and Rubber Modified Bitumen in Road Construction (First Revision) IRC:SP:55-2001 Guidelines for Safety in Construction Zones IRC:SP:58-2001 Guidelines for Use of Flyash in Road Embankments IRC:SP:59-2002 Guidelines for Use of Geotextiles in Road Pavements and Associated Works IRC:SP:60-2002 An Approach Document for Assessment of Remaining Life of Concrete Bridges IRC:SP:61-2004 AnApproach Document on Whole Life Costing for Bridges in India
  • 4. 4 Number Designation Title IRC:SP:62-2004 Guidelines for the Design and Construction of Cement Concrete Pavement for Rural Roads IRC:SP:63-2004 Guidelines for the Use of Interlocking Concrete Block Pavement IRC:SP:64-2005 Guidelines for the Analysis and Design of Cast-in-Place Voided Slab Superstructure IRC:SP:65-2005 Guidelines for Design and Construction of Segmental Bridges IRC:SP:66-2005 Guidelines for Design of Continuous Bridges IRC:SP:67-2005 Guidelines for Use of External and Unbonded Prestressing Tendons in Bridge Structures IRC:SP:68-2005 Guidelines for Construction of Roller Compacted Concrete Pavements IRC:SP:69-2005 Guidelines & Specifications for Expansion Joints IRC:SP:70-2005 Guidelines for the Use of High Performance Concrete in Bridges IRC:SP:71-2006 Guidelines for Design and Construction of Pretensioned Grider of Bridges IRC:SP:74-2007 Guidelines for Repair and Rehabilitation of Steel Bridges IRC:SP:75-2008 Guidelines for Retrofitting of Steel Bridges by Prestressing IRC:SP:76-2008 Tentative Guidelines for Conventional, Thin and Ultra Thin Whitetopping IRC:SP:78-2008 Specifications for Mix Seal Surfacing (MSS) Close-Graded Premix Surfacing (CGPS) IRC:SP:79-2008 Tentative Specifications for Stone MatrixAsphalt IRC:SP:80-2008 Guidelines for Corrosion Prevention, Monitoring and Remedial Measures for Concrete Bridge Structures IRC:SP:81-2008 Tentative Specification for Slurry Seal and Microsurfacing IRC:SP:83-2008 Guidelines for Maintenance, Repairs & Rehabilitation of Cement Concrete Pavements Ministry of Shipping &Transport (Roads Wing) Handbook on Road Construction Machinery HRB SR.No.11, 1992 State of the Art: Granular and Bound Bases and Sub-Bases
  • 5. 5 Appendix-2 LIST OF INDIAN AND FOREIGN STANDARDS REFERRED TO IN THE SPECIFICATIONS Number Designation Title (A) INDIAN STANDARDS IS:5-2004 Colour for ready mixed paints and enamels (Fifth revision) IS:73-2006 Viscosity Grade Bitumen Specifications IS:164-1981 Ready mixed paints, brushing, for road marking, to Indian Standard Colour No.356 Golden yellow, white and black IS:210-1993 Grey iron castings (fourth revision) IS:215-1995 Road tar specification (third revision) IS:217-1988 Specification for Cutback Bitumen (second revision) IS:269-1989 Specification for 33 grade ordinary Portland cement (fourth revision) IS:278-1978 Specification for Galvanized steel barbed wire for fencing (third revision) IS:280-2006 Specification for Mild steel wire for general engineering purposes (fourth revision) IS:334-2002 Glossary of terms relating to bitumen and tar (third revision) IS:383-1970 Specification for Coarse and fine aggregates from natural sources for concrete (second revision) IS:432-1982 Mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement Part I Specification for Mild steel and medium tensile steel bars (third revision) Part II Hard-drawn steel wire (third revision) IS:443-1975 Methods of sampling and test for rubber hoses (second revision) IS:454-1994 Specification for Cutback bitumen from Waxy Crude- Specification (second revision) IS:455-1989 Specification for Portland stag cement (fourth revision) IS:456-2000 Plain and reinforced concrete – Code of Practice (Fourth revision)
  • 6. 6 Number Designation Title IS:458-2003 Precast Concrete pipes (with and without reinforcement) – specification (third revision) IS:460-1985 Specification for test sieves: IS:508-1987 Specification grease graphited (fourth revision) IS:516-1959 Methods of test for strength of concrete IS:702-1988 Industrial bitumen (second revision) IS:736-1986 Wrought aluminium and aluminium alloys, plates for general engineering purposes (third revision) IS:814-2004 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel (sixth revision) IS:1030-1998 Carbon steel castings for general engineering purposes (fifth revision) IS:1077-1992 Common burnt clay building bricks (fifth revision) IS:1124-1974 Method of test for water absorption apparent specific gravity and porosity of natural building stones (first revision) IS:1129-1972 Dressing of natural building stones (first revision) IS:1148-1982 Hot rolled rivet bars (upto 40 mm dia) for structural purposes (third revision) IS:1149-1982 High tensile rivet bars for structural purposes (third revision) IS:1195-2002 Bitumen mastic for flowing (second revision) IS:1199-1959 Method of sampling and analysis of concrete IS:1201:1978 Sampling – (see IS:1201 to IS:1220) IS:1203-1978 Determination of penetration (first revision) (see IS:1201 to IS:1220) IS:1205-1978 Determination of softening point (first revision) (see IS:1201 to IS:1220) IS:1206 : Part 1 : 1978 Determination of viscosity: Part 1 Industrial viscosity - (see IS 1201 to IS 1220) IS:1206 : Part 2 : 1978 Determination of viscosity: Part 2 Absolute viscosity - (see IS 1201 to IS 1220) IS:1206 : Part 3 : 1978 Determination of viscosity: Part 3 Kinematic viscosity - (see IS 1201 to IS 1220)
  • 7. 7 Number Designation Title IS:1208-1978 Determination of ductility (first revision) (see IS:1201 to IS:1220) IS:1209-1978 Determination of flast point and fire point (first revision) (see IS:1201 to IS:1220) IS:1212-1978 Determination of loss on heating (first revision) IS:1216-1978 Determination of solubility in carbon disulphide trichoroethylene (first revision) IS:1217-1978 Determination of mineral matter ash) (first revision) (see IS:1201 to IS:1220) IS 1239 : Part 1 : 2004 Steel Tubes, Tubulars and Other Wrought Steel Fittings - Specification - Part 1 : Steel Tubes IS 1239 : Part 2 : 1992 Mild steel tubes, tubulars and other wrought steel fittings, Part 2 Mild steel tubulars and other wrought steel pipe fittings IS 1364 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 1 : Hexagon Head Bolts (Size Range M 1.6 to M 64) IS 1364 : Part 2 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 2 : Hexagon Head Screws (Size Range M 1.6 to M 64) IS 1364 : Part 3 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 3 : Hexagon Nuts, Style 1 (Size Range M 1.6 to M 64) IS 1364 : Part 4 : 2003 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 4 : Hexagon Thin Nuts (Chamfered) (Size Range M1.6 to M64) IS 1364 : Part 5 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 5 : Hexagon Thin Nuts - Product Grade B (Unchamfered) (Size Range M 1.6 to M 10) IS 1364 : Part 6 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades Aand B - Part 6 : Hexagon Nuts, Style 2 IS 1367 : 2002 (Part 1 to 20) Technical Supply Conditions for Threaded Steel Fasteners IS:1387-1993 General requirements for the supply of metallurgical materials (second revision)
  • 8. 8 Number Designation Title IS:1398-1982 Packing paper, waterproof, bitumen-laminated (second revision) IS: 1448 (Part 1 to 152) Methods of Test for Petroleum and its Products IS:1477 Code of practice for painting of ferrous metals in buildings Part 1-1971 Pretreatment (first revision) Part 2-1971 Painting (first revision) IS:1489-1991 Specification for Portland-pozzolana cement Part 1 Flyash based (third revision) Part 2 Calcined clay based (third revision) IS:1498-1970 Classification and identification of soils for general engineering purposes (first revision) IS:1514-1990 Methods of sampling and test for quick lime and hydrated lime (first revision) IS:1732-1989 Dimensions for round and square steel bars for structural and general engineering purposes (second revision0 IS:1785-1983 Plain hard-drawn steel wire for prestressed concrete Part I Cold-draws stress relieved wire (second revision) Part II As drawn wire IS:1786-1985 High strength deformed steel bars and wires for concrete reinforcement (third revision) IS 1838 : Part 1 : 1983 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient type): Part 1 Bitumen impregnated fibre IS 1838 : Part 2 : 1984 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient type) Part 2 CNSLAldehyde resin and coconut pith IS:1888-1982 Method of load tests on soils (second revision) IS:2004-1991 Carbon steel forging for general engineering purposes (third revision) IS:2062-2006 Steel to general structural purpose (fifth revision) IS:2116-1980 Sand for masonry mortars (first revision) IS:2131-1981 Methods for standard penetration test for soils (first revision)
  • 9. 9 Number Designation Title IS:2250-1981 Code of practice for preparation and use of masonry mortars (first revision) IS:2386-1963 Methods of test for aggregates for concrete Part 1 Particle size and shape Part 2 Estimation of deleterious materials and organic impurities Part 3 Specific gravity, density, voids, absorption and bulking Part 4 Mechanical properties Part 5 Soundness Part 6 Measuring mortar making properties of fine aggregates Part 7 Alkali – aggregate reactivity Part 8 Petrographic examination IS:2720 Methods of test for soils Part 2-1973 Determination of water content (second revision) Part 3-1980 Determination of specific gravity (first revision) Section I Fine grained soils Section II Medium and coarse grained soils Part 4-1985 Grain size analysis (second revision) Part 5-1985 Determination of liquid and plastic limits (second revision) Part 7-1980 Determination of moisture content/dry density relation using light compaction (second revision) Part 8-1983 Determination of water content-dry density relation using heavy compaction (second revision) Part 10-1991 Determination of unconfined compressive strength (second revision0 Part 13-1986 Direct shear test (second revision) Part 14-1983 Determination of density index (relative density of cohesionless soils (first revision) Part 16-1987 Laboratory determination of CBR (second revision) Part 27-1977 Determination of total soluble sulphates (first revision) Part 28-1974 Determination of dry density of soils in-place by the sand replacement method (first revision)
  • 10. 10 Number Designation Title Part 29-1975 Determination of dry density of soils in-place by core cutter method (first revision0 Part 37-1976 Determination of sand equivalent values of soils and fine aggregates Part 40-1977 Determination of free swell index of soils IS 3117 : 2004 Bitumen Emulsion for Roads and Allied Applications (Anionic Type) - Specification IS:3466-1988 Specification for Masonry cement (second revision) IS:3764-1992 Code of safety for excavation work (first revision) IS:4138-1977 Safety code for working in compressed air (first revision) IS:4332 Method of test for stabilized soils Part I-1967 Methods of sampling and preparation of stabilized soils for testing Part 3-1967 Test for determination of moisture content-dry density relation for stabilized soil mixtures Part 4-1968 Wetting and drying and, freezing and thawing tests for compacted soil-cement mixtures Part 5-1970 Determination of unconfined compressive strength of stabilized soil Part 7-1973 Determination of cement content of cement stabilized soils Part 8-1969 Determination of lime content of lime stabilized soils IS:4434-1978 Code of practice for in-situ vane shear test for soils (first revision) IS:4826-1979 Hot dipped galvanized coating on round steel wires (first revision) IS:5317-2002 Pitch mastic for bridge decking and Roads - specifications IS:5435-1987 General requirements for cold asphalt macadam mixing plants (first revision) IS:5640-1970 Method for determining the aggregate impact value of soft coarse aggregate IS:6006-1983 Uncoated stress relieved strands
  • 11. 11 Number Designation Title IS:6241-1971 Methods of test for determination of stripping value of road aggregates IS:6909-1990 Supersulphated cement IS:6925-1973 Methods of test for determination of water soluble chlorides in concrete admixtures IS:7537-1974 Road traffic signals IS:7623-1993 Specification for li thium base grease for industrial purposes (second revision) IS:8041-1990 Rapid hardening Portland cement (second revision) IS:8112-1989 43 grade ordinary Portland cement (first revision) IS:8500-1991 Structural steel – microalloyed (medium and high strength qualities (first revision) IS:8887-2004 Bitumen emulsion for roads (cationic type) – specification (second revision) IS:9103-1999 Admixtures for concrete (first revision) IS:9381-1979 Methods of testing tar and bituminous materials: determination of frass breaking point of bitumen IS:9382-1979 Methods of testing tar and bituminous materials: determination of effect of heat and iar by thin film oven tests IS:10262-2004 Guidelines for concrete mix design IS:12269-1987 Specification for 53 grade ordinary Portland cement IS:12330-1988 Specification for sulphate resisting Portland cement IS:13321 (Part I)-1992 Glossary of terms for geosynthetics, part 1: terms used in materials and properties IS:13325-1992 Determination of tensile properties of extruded polymer geogrids using the wide strip-test method IS:13326 (Part I)-1992 Evaluation of interface friction between geosynthetics and soil-method of test, part 1: modified direct shear technique IS:SP 23-1982 Handbook on concrete mixes (B) FOREIGN STANDARDS ASTM D36 - 06 Standard Test Method for Softening Point of Bitumen (Ring-and-BallApparatus)
  • 12. 12 Number Designation Title ASTM D395 - 03(2008) Standard Test Methods for Rubber Property—Compression Set ASTM D412 - 06ae2 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension ASTM D429 - 08 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates ASTM D573 - 04 Standard Test Method for Rubber—Deterioration in an Air Oven ASTM D624 - 00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers ASTM D664 - 09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration ASTM D797-82(1989) Test Method for Rubber Property-Young’s Modulus at Normal and Subnormal Temperatures (Withdrawn 1994) Withdrawn Standard: ASTM D977 - 05 Standard Specification for Emulsified Asphalt ASTM D979 - 01(2006)e1 Standard Practice for Sampling Bituminous Paving Mixtures ASTM D1075 - 07 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures ASTM D1149 - 07 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment ASTM D1559-89 Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Withdrawn 1998) Withdrawn Standard: ASTM D2026 - 97(2004) Standard Specification for Cutback Asphalt (Slow-Curing Type) ASTM D2027 - 97(2004) Standard Specification for Cutback Asphalt (Medium-Curing Type) ASTM D2041 - 03a Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures ASTM D2172 - 05 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures ASTM D2240 - 05 Standard Test Method for Rubber Property— Durometer Hardness
  • 13. 13 Number Designation Title ASTM D2397 - 05 Standard Specification for Cationic Emulsified Asphalt ASTM D3203 - 05 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures ASTM D3625 - 96(2005) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water ASTM D3910 - 07 Standard Practices for Design, Testing, and Construction of Slurry Seal ASTM D4533 - 04 Standard Test Method for Trapezoid Tearing Strength of Geotextiles ASTM D5976-96 Standard Specification for Type I Polymer ModifiedAsphalt Cement for Use in Pavement Construction –SUPERSEDED ASTM E11 - 04 Standard Specification for Wire Cloth and Sieves for Testing Purposes ASTM E810 - 03(2008) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry AASHTO : T283-07-UL Standard Method of Test for Resistance of Compacted Hot MixAsphalt (HMA) to Moisture-Induced Damage, Single User Digital Publication AASHTO : M294-08-UL Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter, Single User Digital Publication AASHTO :M288-06-UL Standard Specification for Geotextile Specification for Highway Applications, Single User Digital Publication AASHTO :M017-07-UL Standard Specification for Mineral Filler for Bituminous Paving Mixtures AASHTO : R005-08-UL Standard Recommended Practice for Selection and Use of Emulsified Asphalts AASHTO : M081-92-UL Standard Specification for Cutback Asphalt (Rapid-Curing Type), Single User Digital Publication AASHTO : M082-75 Standard Specification for Cut-back asphalt (Medium-curing type) AASHTO : M140-03-UL Standard Specification for Emulsified Asphalt AASHTO : M57-80 Materials for embankments and subgrades AASHTO : M147-65 Materials for aggregate and soil-aggregate sub-base, base and surface courses
  • 14. 14 Number Designation Title AASHTO : M216-05-UL Standard Specification for Lime for Soil Stabilization, Single User Digital Publication AASHTO : M249-08-UL Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form), Single User Digital Publication AASHTO : M268-08-UL Standard Specification for Retroreflective Sheeting for Traffic Control AASHTO : M282-99-UL Standard Specification for Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements AASHTO : M082-75-UL Standard Specification for Cutback Asphalt (Medium-Curing Type), Single User Digital Publication AASHTO : M140-03-UL Standard Specification for Emulsified Asphalt AASHTO : M208-01-UL Standard Specification for Cationic Emulsified Asphalt, Single User Digital Publication AASHTO : T182-84-UL Standard Method of Test for Coating and Stripping of Bitumen-Aggregate Mixtures AASHTO : T283-07-UL Standard Method of Test for Resistance of Compacted Hot MixAsphalt (HMA) to Moisture-Induced Damage, Single User Digital Publication BS : 410-2005 Test sieves – Technical requirements and Testing Part 1 Test sieves of metal wire cloth Part 2 Test sieves of perforated Metal plate BS : 434 Bitumen road emulsions (anionic and cationic) Part 2 : 1984 Specification for bitumen road emulsion Part 2:2006 Code of practice for the use of cationic bitumen emulsions on roads and other paved areas BS : 598 Sampling and examination of bituminous mixtures for roads and other paved areas Part 104:1987 Methods of test for the determination of the density and compaction Part 107:1990 Method of test for the determination of the composition of design wearing course rolled asphalt BS : 729-1971 Hot dip galvanized coating on iron and steel articles
  • 15. 15 Number Designation Title BS : 812-1995 Testing aggregates Part 2 Methods for determination of Density Part 3-75 Methods for determination of mechanical properties Part 111-90 Method for determination of ten per cent: fines value (TFV) Part 114-1989 Method for determination of the polished-stone value BS : 1047-1983 Specification for Air-cooled blast furnace-slag aggregate for use in construction BS : 1154-2003 Natural rubber compounds – specifications BS : 1377-1990 Methods of test for soils for civil engineering purposes BS : 1447-1988 Mastic asphalt (limestone fine aggregates) for roads and footways and pavings in buildings BS : 1449-1956 Steel plate, sheet and strip Part 1-1991 Carbon steel plate, sheet and strip Part 2-2008 Stainless and heat resisting plate, sheet and strip BS : 1470-1987 Wrought aluminium and aluminium alloys for general engineering purposes – plate, sheet and strip BS : 2000 Methods of test for petroleum and its products Part 397:1995 Recovery of bitumen binders-dichloromethane extraction rotary film evaporator method – Withdrawn on 1.11.2007 BS : 2630-1982 Specification for resistance projection welding of uncoated low carbon steel sheet and strip using embossed projections BS : 2870-1980 Rolled copper and copper alloys : sheet, strip and foil BS : 3262 Hot-applied thermoplastic road marking materials Part 1-1989 Specification for constituent materials and mixtures Part 2-1999 Specification for road performance Part 3-1989 Specification for application of material to road surface BS : 5212:Part 2-1990 Code of practice for the application and use of joint sealants BS : 6044-1987 Specification for pavement marking paints BS : 6088-1981 Specification for solid glass beads for use with road marking compounds and for other industrial uses
  • 16. 16 Number Designation Title BS : 6906 Methods of test for geotextiles Part 1-1987 Determination of tensile properties using a wide width strip Part 2-1989 Determination of the apparent pore size distribution by dry sieving Part 3-1989 Determination of water flow normal to the plane of the geotextile under a constant head Part 4-1990 Determination of the puncture resistance 9CBR puncture test) Part 7-1990 Determination of in-plane waterflow BS : 7542-1992 Method of test curing compound for concrete CRRI & IOC, New Delhi Bituminous road construction handbook BS : DD232-2006 Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage MS-4 (7th edition) The asphalt handbook (Asphalt Institute) MS-2 (6th edition) Mix design methods for asphalt concrete and other hot-mix types (Asphalt Institute) MS-14 (3rd edition) Asphalt Cold Mix Manual (Asphalt Institute) GRI-GG1 Geogrid rib tensile strength (Geosynthetic Research Institute) GRI-GG2 Geogrid junction strength (Geosynthetic Research Institute) GRI-GG3 Tensile creep testing of geogrids (Geosynthetic Research Institute)
  • 17. 17