The document describes the AutoTreat automated chemical treatment system. It can be installed in less than 2 hours, requires only a standard 110V outlet, and automatically calculates and runs chemical treatment programs. The system benefits include fully automated and flexible chemical treatments that reduce costs and increase production. It has intuitive touchscreen controls and weatherproof components. Setup only involves programming treatment volumes, days, and frequency.
1. Francis Hitschmann, PE
(785) 550-2702
www.autotreatsystems.com
The whole system can be installed, programmed,
and running in less than 2 hours.
AutoTreat requires a conventional 3 prong 110 VAC
plugin, which means you won’t need an electrician
when a 110 VAC is installed.
System Benefits:
Fully automated chemical treatments
Save on pulling unit costs
Reduce pump repair/replacement costs
Reduce wear on lease roads by eliminating truck treating
Eliminate truck treating stop charges
Eliminate lost production from over circulation
Prevent cross-contamination from foreign lease water
Automatically calculates treating times
No more handling of chemicals
System Features:
Installs in less than 2 hours
Select from 3 different products to treat with up to 3
different chemicals
Intuitive touch screen setup is similar to hand treating
Flexible to easily adjust to your well’s chemical requirements
3 user modes: AutoTreat, Manual Control, Hand Treat
Pre-wired for quick installation without an electrician
Weatherproof components rated to NEMA 4X
Field tested for 3+ years
AutoTreat setup is simple.
1. Set volumes of pre-flush, chemical, post-flush.
2. Select the day(s) of the week and corresponding time(s)
to start program.
3. Select the number of weeks between treatments.
4. Input your well’s total fluid per day.
And that’s it! You’re up and running!
Automated Treating Systems, LLC builds systems specifically
designed to automate any well’s chemical program. Intuitive,
flexible, and easy-to-install AutoTreat products can have you
up and running in less than 2 hours.
2. AutoTreat User Modes
AutoTreat Mode
Flexible system adjusts to any chemical program
Fully automates your chemical program
• Pre-flush (bbls)
• Chemical (gal)
• Post-flush (bbls)
You select the day(s) of the week and time of day to circulate
Then, you select the frequency to repeat the schedule
(e.g. weekly, bi-weekly, monthly, etc.)
Hand Treat Mode
Allows you to set a timer for the valve to stay open. When
the timer is up, the valve closes and returns the well
to production
Reverts back to AutoTreat schedule when timer is up
No backtracking for the pumper
Manual Control Mode
Allows you to open/close the valve and turn pumps on/off
from the touch screen
AutoTreat Highlights
ELECTRIC BALL VALVE
NEMA 4X aluminum housing with thermostat and heater
allow for operation in the coldest environments.
LMI CHEMICAL PUMP
Industry proven brand with a 2 GPH rate.
ENCLOSURE
Intuitive touch screen inside a NEMA 4X rated enclosure with
internal thermostat and heater protects equipment from
condensation and cold weather.
SETUP IS EASY
The touch screen walks you through setup with a summary to give
you peace of mind on the days, amount, and frequency a chemical
will be circulated.
ATS1 PACKAGE INCLUDES:
NEMA 4X electrical enclosure, electric brass ball valve, 2 GPH LMI
chemical pump, and power cords.