ABB ACS 800 SERIES VFD TRAINNING GUIDE BY DEEPAK GORAI.IN THIS GUIDE IO CONNECTION,CONFIGURATION,LAPTOP CONNECTIVITY WITH VFD DRIVE,PROFUSE COMMUNICATION AND SETTINGS

1. VERIABLE FREQUENCY DRIVE
ABB ACS 800 SERIES VERIABLE FREQUENCY DRIVE
A variable-frequency drive (VFD)
or adjustable-frequency
drive (AFD), variable-voltage/variable-
frequency (VVVF) drive, variable speed
drive (VSD), AC drive, micro
drive or inverter drive is a type
of motor drive used in electro-
mechanical drive systems to control AC
motor speed and torque by varying
motor input frequency and voltage.DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

2. VFD DRIVE VIEWS
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

3. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

4. ABB ACS 800 SERIES POWER CONNECTION DIAGRAM
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

5. INPUT AND OUTPUT CABLE PROPER CLIMPING WITH LUGS
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

6. DRIVE CONNECTION SLOT DETAIL
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

7. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

8. DRIVE OUTPUT INDICATION FOR DCS READY,RUNNING,INVERTERED
FAULT
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

9. DRIVE DIGITAL INPUT AND ITS USES WITH CONNECTION DIAGRAM
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

10. DRIVE DIGITAL ANALOG SIGNAL AND ITS USES WITH CONNECTION
DIAGRAM
POT
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

11. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

12. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

13. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

14. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

15. GROUP 99 PARAMETER SETTING FOR QUICK COMMISSIONING
99 START UP DATA
1)LANGUAGE=ENGLISH
2)APPLICATION MACRO=FACTORY
3)APPLICATION RESTORE=NO
4)MOTOR CONTROL MODE=DTC/SCALLER(DTC)
5)MOTOR NOMINAL VOLTAGE=415V(AS PER MOTOR
NAME PLATE)
6)MOTOR NOMINAL CURRENT=34.5A(AS PER MOTOR
NAME PLATE)
7)MOTOR NOMINAL FREQUENCY=50HZ
8)MOTOR NOMINAL SPEED=1455RPM(AS PER NAME
PLATE)
9)MOTOR NOMINAL POWER=18.5KW(AS PER MOTOR
NAME PLATE)
10)MOTOR IDEL RUN MODE=REDUCED
ACTUAL TO GO MAIN DISPLAY.
SELECT LOCAL MODE
MOTOR IDEL RUN
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

16. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

17. NODE ADDRESS-0 TO 126,BIT RATE NEED TO SAME
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

18. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

19. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

20. VFD CONNECTION WITH PLC THROUGH PROFIBUS DIAGRAM
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

21. NODE ADDRESS SETTING AND DIP SWITCH SETTINGS
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

22. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

23. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

24. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

25. HOW ABB ACS 800 SERIES VFD CONNECT WITH LAPTOP
REQUIRE
1)USB MINI DATA CABLE
2)SOFTWARE:DRIVE COMPOSER ENTRY 2.4
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

26. HARDWARE REQUIRED TO INSTALLED SOFTWARE
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

27. AFTER SUCESSFULLY INSTALLED SOFTWARE DRIVE COMPOSER ENTRY 2.4 CHECK COM PORT IN
LAPTOP/PC.
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

28. DOUBLE CLICK ON ICON THEN THIS PAGE START PRESSES CONNECT
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

29. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

30. IF WANT TO CONNECT WITH ETHERNET FLOW THIS STEPS
DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER

31. DEEPAK GORAI
Sr. CONTROL AND INSTRUMENTATION
ENGINEER
PHONE-7008337321
EMAIL-deepakicsjsr@gmail.com
THANKS FOR WATCHING