Embedded System Design

1. By Md.Dedarul Hasan,
PGD in IT (Student), April 2017, IICT BUET.

2. 1st Step:
 Install CodeVision AVR with crack version or latest
with .[We can extend CVAVR by CodeVisionStudio]
 Install Proteus Simulators latest version.

3. ` 2nd Step:
Creating a project at CVAVR.
Go to file->new->project->

4. 3rd Step:

5. 4th Step:

6. 5th Step:

7. 6th Step:

8. 7th Step:

9. 8th Step:

10. 9th Step:

11. 10th Step:

12. 11th Step:

13. 12th Step:

14. 13th Step:

15. 14th Step:

16. 15th Step:

17. 16th Step:

18. 17th Step:

19. 18th Step:

20. 19th Step:

21. 20th Step:

22. 21st Step:

23. 22nd Step:

24. 24th Step:

25. 25th Step:

26. 26th Step:

27. 27th Step:

28. 28th Step:

29. 29th Step:

30. 30th Step:

31. 31st Step:

32. 32nd Step:

33. 33rd Step:

34. 34th Step:

35. 35th Step:

36. 36th Step:

37. 37th Step:
Go to simulator ISIS Professional.

38. 38th Step:

39. 39th Step:

40. 40th Step:

41. 41st Step:

42. 42nd Step:

43. 43rd Step:

44. 44th Step:

45. 45th Step:

46. 46th Step:

47. 47th Step:

48. 48th Step:

49. 49th Step:

50. 50th Step:
Double click on AtMega then configure that .obj file with dirrectroy & Set Clock Frequency 60 Hz.

51. 51st Step:

52. 52nd Step:

53. 53rd Step:
Error shown here as because we didn’t write our program which have to apply on our avr board.So,
we have to code here.

54. 54th Step:
So, We code the class file and compile & build ,then test that on eXtreme Burner.

55. 55th Step:
Now Install eXtreme Burner to test programms on AVR Board.

56. 56th Step:

57. 57th Step:

58. 58th Step:

59. 59th Step:

60. 60th Step:

61. 61st Step:

62. 62nd Step:

63. 63rd Step:

64. 64th Step:

65. 65th Step:

66. 66th Step:

67. Pros & Cons:
 Ours hands on topic should be practice next using that manual step by step system
design of ESD.