Titanium alloy corrosion resistance and industrial titanium close, this is the titanium alloy in the chemical and shipbuilding industry to obtain a wide range of applications.
2. Inorganic salt solution
Ferric Chloride/Fe3+ 40 Room Temperature //95 0.000/0.002 Excellent/Excellent
Ferrous Chloride/Fe2+ 30
Room Temperature /Boiling
0.000/<0.127 Excellent/Excellent
Lead Chloride 10 <0.127/<0.127 Excellent/Excellent
Cuprous chloride 50 <0.127/<0.127 Excellent/Excellent
Ammonium Chloride 10 <0.127/<0.000 Excellent/Excellent
Calcium Chloride 10 <0.127/<0.000 Excellent/Excellent
Aluminum Chloride 25 <0.127/<0.127 Excellent/Excellent
Magnesium Chloride 10 <0.127/<0.127 Excellent/Excellent
Nickel Chloride 5-10 <0.127/<0.127 Excellent/Excellent
Barium Chloride 20 <0.127/<0.127 Excellent/Excellent
Copper Sulfate 20 <0.127/<0.127 Excellent/Excellent
Ammonium Sulfate 20℃Saturation <0.127/<0.127 Excellent/Excellent
Sodium Sulfate 50 <0.127/<0.127 Excellent/Excellent
Lead Sulphate 20℃Saturation <0.127/<0.127 Excellent/Excellent
Cuprous Sulfate
10 <0.127/<0.127 Excellent/Excellent
30 <0.127/<0.127 Excellent/Excellent
Silver Nitrate 11 Room Temperature/— <0.127/— Excellent/—
Organic compounds
Benzene(HCl、NaCl) Steam and Liquid 80 0.005 Excellent
Carbon Tetrachloride Ditto
Boiling
0.005 Excellent
Tetrachlorethylene (Stable)
100%Steam and Liquid
0.0005 Excellent
Tetrachlorethylene (H2O) 0.0005 Excellent
Chloroform 0.003 Excellent
Chloroform(H2O) 0.127 Good
Trichlorethylene 99%Steam and Liquid 0.00254 Excellent
Trichlorethylene (Stable) 99 0.00254 Excellent
Formaldehyde 37 0.127 Good
Formaldehyde (2.5%H2SO4) 50 0.305 Good
Note:
1.Corrosion resistance is divided into three grades: Excellent——Corrosion resistance,Corrosion rate is below
0.127mm/a. Good——Medium corrosion resistance,Corrosion rate is between 0.127-1.27mm/a. Bad——Not
corrosion,Corrosion rate is 1.27mm/a.
2. Industrial pure titanium especially in neutral, oxidizing media and high corrosion resistance in seawater has high
corrosion resistance. Titanium corrosion resistance is good than aluminum, stainless steel and nickel alloy in sea
water. In the atmosphere of industrial, agricultural and marine environments, the surface of titanium product does not
discolor even after several years. Hydrofluoric acid, sulfuric acid, hydrochloric acid, orthophosphoric acid and some
hot concentrated organic acids on the corrosion of titanium . Titanium on a variety of concentrations of nitric acid and
chromic acid high stability in alkaline solution and most organic acids, inorganic salt solution corrosion resistance is
also high.
3. Titanium corrosion is carried out uniformly,does not occur local corrosion and intergranular corrosion.
4. Titanium alloy corrosion resistance and industrial titanium close, this is the titanium alloy in the chemical and
shipbuilding industry to obtain a wide range of applications.