1. Charles M. Roberts
12032 Brushy Creek Rd. Lucedale MS 39452
matt_tonie@yahoo.com Tel: 601 394 3448
Certified CWI # 15090881
OBJECTIVE I am an American citizen. I am a very committed individual with greatpeople skills.Ihave
worked as a structural welder,boiler maker,pipe fitter, and rigger. I am now looking to
start and further my career as a Certified Welding Inspector.
SKILLS & ABILITIES  I have experience in gas construction and maintenance construction
 5 years as a structural welder
 Experience in blue prints both pipe and iron
EXPERIENCE September 2015-Present – Performance Contractors, Kemper County, Mississippi
I am currently employed with Performance Contractors as a CWI at Kemper County
MS Southern CompanyIGCC Project.
 Perform NDE test.(PMI, UT, PT, RT, BHN)
 Walk down ISOs.
 Inspectwelds on pipe and structure
August 2015-September 2015 – Early Construction, Demopolis, Alabama
I was a Boiler Maker in Demopolis,Al. Demopolis is a new Rock-Tenn coal powered
boiler for its paper mill.My duties include:
 Rigging ductwork and coal conveyers
 Demoing and replacing waterwall and nozark tube panels
 Fitting structural steel
June 2015-August 2015 – Mdl Contractors, Mobile, Alabama
I was a Boiler Maker/Iron Worker at Evonik Inc. My duties included:
 Replacing iron
 Set new conveyers for Aerosil warehouse
March 2015-April 2015 – Early Construction, Trimble, Kentucky
I was a Boiler Maker at Kentucky Utilities Trimble CountyPlant. My duties included:
 Rig to the main ring header around the waterwall panels
 Replace tubes connecting the ring header to the waterwall panels
 Fit tubes that connectthe main ring header to the waterwall
January 2015-March2015 – Early Construction, Carrolton, Georgia
I was a Boiler Maker at Southern CompanyPlantTyler. My duties included:

2. PAGE 2
 Perform structural welds with both FCAW and SMAW
 Replace hanger rods on main duct
 Rig to and lift duct to proper elevation
 Replace buck stay clips
 Replace braces inside ofduct
August 2014-December 2014 – Pic Boiler Inc, Ghent, Kentucky
I was a Boiler Maker/Structural Welder at Kentucky Utilities PlantGhent. My duties
included:
 Perform proper rigging techniques on burners
 Demo and replace burners
 Demo and replace coal piping
 Weld new valves in coal piping
 Weld new burners to boiler wind box
February 2014-August 2014 – Performance Contractors, Kemper County,
Mississippi
I was a Boiler Maker/Rigger at Southern CompanyPlant Kemper County. My duties
included:
 Perform hydro’s on completed sections ofpiping
 Insertblinds between flanges to separate hydro’s or to prevent water in wrong
sections ofpiping
 Rig blinds depending on size
September 2013-December 2013 – Pic Boiler Inc, Petersburg, Indiana
I was a Rigger/Boiler Maker/Structural Welder at Indiana Power and Lighting Petersburg
Plant. My duties included:
 Rigging nozark and superheatpanels
 Weld pipe supports
 Fit superheatand nozark panels
June 2013-September 2013 – Southeast Boiler and Rigging, Stevenson, Alabama
I was a Rigger/Boiler Maker/Structural Welder at Rock-Tenn Paper Mill Stevenson Plant.
My duties included:
 Assemble a compactboiler
 Rig and hang iron for supportand platforms
 Weld clips for iron and handrails
 Weld pipe supports
 Rig duct work
 Weld duct work
March 2013-May2013 – Mdl Contractors, McIntosh, Alabama
I worked as a Boiler Maker at Olin Chemical Plant.My duties included:
 Tying rebar
 Forming for concrete
 Finishing concrete
January 2013-March2013 – Southeast Boiler and Rigging, Roxboro, North Carolina
I worked as a Boiler Maker at Duke Energy Mayo Plant. My duties included:
 Replace waterwall panels
 Rig new and old waterwall panels
September 2012-November 2012 – Tei Boiler Inc, Roxboro, North Carolina

3. PAGE 3
I worked as a Boiler Maker/Structural Welder at Duke Energy Mayo Plant. My duties
included:
 Replace ash hoppers on the boiler
 Weld ash hoppers
 Rig ash hoppers
June 2012-September 2012 – Southeast Boiler and Rigging, Hattiesburg,
Mississippi
I worked as a Boiler Maker/Structural Welders at Resinall Plantin Hattiesburg.My duties
included:
 Install pipe and valves
 Torque flanges using high torque machines
 Weld pipe supports
September 2011-May 2012 – Performance Contractors, McIntosh, Alabama
I worked as a Boiler Maker/Pipe Welder/Structural Welder/Iron Worker at Olin Chemical
Plant. My duties included:
 Weld and fit HDPE pipe
 Weld pipe supports and iron
 Hang iron for platforms and support
 Tie rebar
 Form for concrete
 Finish concrete
May 2010-July 2011 – Mdl Contractors, McIntosh, Alabama
I worked as a Civil Worker/Helper at Olin Chemical Plant.My duties included:
 Tie rebar
 Form for concrete
 Finish concrete
 Tear down forms
 Dirt work
PERSONALL INTEREST
Interest: Football, baseball,and hunting
Fitness: Very good health
References: Available upon request