How to properly prepare a DECT setup? Why and how do you need to meter DECT signal range first? Together with Gigaset, we answer the most important questions and show the setup of a N720 Gigaset pro DECT multicell solution.
5. IP PBX systems
Gigaset pro Product Overview
DECT basestations
DECT handsets
Other devices
N510 IP PRO N720IP PRO N720DM PRO
SL750H PRO R650H PRO
Maxwell 10
S650H PRO
Maxwell basic Maxwell 3
The predecessor of the current
DECT handsets are still supported.
These are: SL610H, S510H, R630H
Askozia
IP PBX system
IP Desktop phones
6. The Gigaset N720 DECT IP multicell system
Handover & roaming
LAN
Configuration via
web browser
8 calls
at once
Total of
30 calls
Askozia IP PBX
Autoprovisioning
DECT Manager
N720 DM PRO
DECT base
station
N720 IP PRO
1–30
Base stations
Up to 100
handsets
Gigaset
handsets
13. Reception power Evaluation of the quality
- 50 dBm Very good
- 60 dBm Good
- 65 dBm Satisfactory (recommended)
- 70 dBm Sufficient
- 73 dBm Weak, not suitable
- 76 dBm Poor, not suitable
Reception power Frame quality Evaluation of the quality
- 60 dBm 100% Good
- 60 dBm 99% Satisfactory
- 60 dBm 98% Sufficient
- 60 dBm 97% Weak, not suitable
Criteria for an optimum DECT wireless network —
quality
14. Installation instructions for the base stations
Min. 1.80 m
Min. 0.50 m
Min.
0.50 m
Min. 5-10 mOperating
temperature
+5° to +40°C
15. How do you go about measuring for a DECT
multicell installation?
Determine the requirements of the telephone network
Draw up an installation plan
Take measurements and log the results
Install the Gigaset pro DECT multicell system
19. Interference factors for DECT
Planning and measuring required!
Loss of range through building materials in comparison with a free wireless field:
Material Loss of range
Glass, wood, untreated Approx. 10%
Wood, treated Approx. 25%
Plasterboard Approx. 27–41%
Brick wall, 10 to 12 cm Approx. 44%
Brick wall, 24 cm Approx. 60%
Aerated concrete wall Approx. 78%
Wired glass wall Approx. 84%
Reinforced concrete ceiling Approx. 75–87%
Metal-coated glass Approx. 75–87%
21. Determine synchronisation plan
A B C D E F
A X X X X X X
B -60 dBm/100% X X X X X
C -68 dBm/100% -69 dBm/98% X X X X
D -63 dBm/100% -60 dBm/100% -45 dBm/100% X X X
E --- -58 dBm/100% -62 dBm/100% -43 dBm/100% X X
F --- --- --- -73 dBm/98% -63 dBm/100% X
A/2
C/2 F/3
B/2
E/2D/1
Synchronisation level
22. Measuring the synchronisation field strength
• Signal strength between base stations (synchronisation measurement).
• Frame quality between basestations
• No active connection
23. Measuring the wireless coverage
• Signal strength between the base stations and defined measurement
points
• With active connection
Value Meaning
-30dBm RSSI value
1 Frequency
04 Slot pair
50H RPN
100 Fr. quality
Enter sequence on the keypad
and press the talk key.
33. N720 DECT IP — troubleshooting
Switch handset to metering mode
Hold down the OFF key to switch off the handset
Hold down keys 1 and 4 and then press the ON key
Enter the five-digit service PIN. Default: 76200
From the Service menu, activate Metering Mode and briefly press the end
call key.
076.5.00.04.100
Frame quality
RPN
Channel
Frequency
Field strength
Quit metering mode