Pathan Asif has over 5 years of experience in mechanical design and product development. He has expertise in CAD software like Creo and CATIA. He has worked on various projects involving design of machines, dies, and other products. Currently he works as a design engineer developing special purpose machines. He holds a B.E. in Mechanical Engineering and has taught CAD subjects. He is looking for a challenging role where he can apply his technical and CAD skills.
1.
1
Curriculum Vitae
Name: PATHAN ASIF Passport No. : P 1024876
Ph. No.: 9890964141
Current Location: AURANGABAD
Email: pathanasif25@gmail.com
PERSONAL STATEMENT:
To pursue an intellectual and challenging career with a leading corporate where I wish to apply my academic
& Domain knowledge with acquired expertise on CAD skills for world class product development.
EDUCATIONAL QUALIFICATIONS
Examination Board/University
Year of
Passing
%
B.E. (Mech Engg.)
Dr. Babasaheb Ambedkar Marathwada University,
Aurangabad (M.H.)
2011
67
(Distinction)
12th
State Board , Aurangabad 2007 70
*Subjects of Special Interest: SOM, FM, Thermal Engineering, Manufacturing, Engineering Graphics, CAD
TECHNICAL BACKGROUND /TRAININGS / KEY SKILLS / CERTIFICATES
Training E1- Beginner, E2 – Intermediate , E3 - Expert
Domain Training Product Design & Development
Tools Training
CREO 2.0(Part Design, surface modeling, Sheet metal,
Assembly & Detailing as per the standards and GD&T)
500 E3
Basic CATIA (Part Design, surface modeling, Sheet metal,
Assembly & Detailing as per the standards and GD&T)
25 E1
AUTO CAD( 2D Drafting & Detailing) 50 E2
Geometric Dimensioning & Tolerances (GD&T) 50 E2
Design Processes SIX SIGMA (DMAIC,DFSS) 50 E2
Productivity Tools MS Office(Excel, Word, PowerPoint ) E3
LIVE PROJECT AND WORK EXPERIENCE
DESIGN ENGINEER AT
SILHOUETTZ
AURANGABAD
(2.5 YEARS Of Experience)
(Since March 2014 – Current)
2.5 Year Of Experience In Design & Development Of Special Purpose
Machines With Expertize On Cad Software CREO 3.0 (Pro-E)
Project Name: SERVO BASED ROTARY TABLE FOR MARKING &
SEAT CHECKING APPLICATION(GENEVA MECHANISM)(GEAR
BOX)
(Application- Marking & Seat check(Blockage Test) inspection on Crank
Case Component at two Stations using Servo Based Rotary Table )
(Design Torque & rpm Calculations for Rotary Table application as per
operating load & Cycle time of 30 Sec, Servo Motor selection,
Gear Box Selection (Position Accuracy (Backlash) Req, Gear Ratio, Out
Torque, rpm Reduction)
Geneva Mechanism Design, Bearing selection, Rotary Table Mechanism
Design, Exterior Panel Design, Manufacturing Process, Material
Selection, Frame Work, Modeling, Assembling & Detailing as per the
standards & application of GD&T)
Tools Used: CREO 3.0 , MATHCAD15 Duration:120 Hrs.
2.
2
Project Name: SERVO BASED TAPPING HEAD & CHAMFERING
HEAD FOR D-NUT COMPONENT
(Application- For Tapping M10X1.25 Tapp & Chamfering from both
side on 5 mm Thick D-Nut Component with Loading through Vibratory
Bawl & Pneumatic Cylinder at Tapping & Chamfering station) (Design
Torque & rpm Calculations for tapping & Chamfering, Servo Motor
selection, 3 Phase motor selection, Bearing selection, Machine Design
(Shaft failure), Mechanism Design, Pneumatic Cylinder Selection,
Manufacturing Process, Material Selection, Frame Work, Modeling,
Assembling & Detailing as per the standards & application of GD&T)
Tools Used: CREO 3.0 , MATHCAD15 Duration:130 Hrs.
Project name: TAPPING HEAD
(Application- For Tapping Screw Jack Component) (Design
Calculation(Force, torque, rpm ), Motor selection, Mechanism Design,
Manufacturing Process, Material Selection, Frame Work, Modeling,
Assembling & Detailing as per the standards & application of GD&T)
Tools Used: CREO 3.0 , MATHCAD15 Duration:120 Hrs.
Project name: Leather Blanking Machine
(Application- For Cutting A Blank Of Leather For Mobile Flip Cover
Production) (Design Calculation for cutting force, Hydraulic Cylinder
selection, Cutting Tool design, Complete Mechanism Design, Structural
Analysis Modeling, Frame Work, Manufacturing Process, Material
Selection, Modeling, Assembling & Detailing as per the standards &
application of GD&T)
Tools Used: CREO 3.0 , MATHCAD15, CREO STRUCTURE
ANALYSIS Duration:140 Hrs.
Project name: PIPE DRILLING MACHINE
(Application- For making holes on pipe along the length at different
PCDs) (Geneva wheel Design, Design Calculation(Force( torque, rpm)
calculation, Motor selection, Mechanism Design, Bearing Selection,
Modeling, Assembling & Detailing as per the standards & application of
GD&T)
Tools Used: CREO 3.0 , MATHCAD15, STRUCTURE DESIGN
(FRAMEWORK) Duration:70 Hrs.
Project name: Filling & Capping SPM For Cold Drink Bottle
(Application- For Filling Cold Drink Bottle From Storage Tank)
(Modeling, Assembling &Detailing as per the standards)
Tools Used: CREO 3.0 , MATHCAD15 Duration:150 Hrs.
Project name: CENTRAL DRILL HYDRAULIC FEEDER
(APPLICATION-HYDRAULIC CLAMPING & FEEDING OF
DIFFERENTIAL GEAR JOB WITH VARIABLE SPEED AS PER
MACHINING (DRILLING) ON A COLUMN DRILLING MACHINE
(MODELING, ASSEMBLING &DETAILING AS PER THE
STANDARDS)
Tools Used: CREO 3.0 , MATHCAD15 Duration:90 Hrs.
Project name: SINGLE DRILLING M/C WITH PNEUMATIC
3.
3
CLAMPING & FEEDING
(Application- Pneumatic Clamping Of part & Drill Head with pneumatic
feeding for drilling & Chamfering with single stroke
(Modeling, Assembling &Detailing as per the standards)
Tools Used: CREO 3.0 , MATHCAD15, STRUCTURE DESIGN
(FRAMEWORK) Duration:75 Hrs.
Project Name: BLOW MOULDING DIE FOR WATER BOTTLE
(Application: Top-Bottom Cavity For Blow Moulding of 1 Liter Triangle
Shape Water Bottle (Packaged Drinking Water) with Coolant
Circulation with the application of BMX (Volume Optimization)
Tool Used : CREO 3.0, Volume Optimization in Creo Duration-24 Hrs
Project Name: CLOSED DIE HOT FORGING
(Application : Manufacturing of Automobile Component by Closed Die
Hot Forging Process)
Responsibility: Total Planning From Design & Manufacturing to Trials
& Dispatch.
Project Name: MARKING MACHINE SPM(ALUMINIUM PROFILE)
(Application : Giving X, Y & Z Motions with combination of Manual &
Pneumatic Controls for Standard Marking Head on Heavy Duty Vehicle
Chassis and also Pneumatically Clamping it with Structure Design)
Tools Used : CREO 3.0, STRUCTURE ANALYSIS, STRUCTURE
DESIGN(FRAMEWORK) Duration : 45 Hrs
Assistant Professor (CAD
TUTOR)
at AIT Aurangabad
(Since Sept 2011- Feb 2014)
2 Years & 6 Months Experience in Teaching subjects CAD Software’s
such as AUTO CAD,CREO ,Graphics, SOM, Thermal, FM, Material
Science
RESEARCH WORK at
CEEKAY DAIKIN Ltd
Aurangabad
During this period Research work is done on the topic
“OPTIMIZATION OF PROCESS PARAMETERS IN SHEET METAL
DEVELOPMENT” Where the values of parameters Die Clearance &
Punch Radius is optimized to compensate wrinkling using CREO as
CAD TOOL & HYPERFORM as analyzer (solver) tool during 1 month
training in Forming Process, Also Studied function of various
departments from Design to Manufacturing with Handled jobs of Press
Machine, manufacturing clutch plate and clutch cover.
Industrial Training Program
at BOSCH REGIONAL
TRAINING CENTRE
(BOSCH LTD) PUNE
Attended A Five Day Training Program On Newer Technologies In
Diesel, Gasoline System, Auto Electrical & Battery Management, Vehicle
Diagnosis& Successfully Acquired the Best Theoretical & Practical
knowledge
Industrial Training Program
at M/S ASHOK LEYLAND
LTD. BHANDARA
Completed industrial training program with detailed study of Chassis
manufacturing & other techniques applied at shop floor
4.
4
ACADEMIC PROJECTS
B.E.
Project
Title : Experimental Study Of Set -Up Of MQL (Minimum Quantity Lubrication)
Objective:
The main Objective of this work is to Experimentally Investigate the role of MQL and Dry
machining in turning 16MnCr5 & EN8 in terms of economy, Quality, Time required.
Scope:
MQL Set-up is used on all Machine Tools such as Lathe Machine.
Brief Procedure:
In this the theoretical study of various research papers, problem definition and methodology has
been done & the setup of MQL (Minimum Qty Lubrication) is established so as to
Experimentally investigate the role of MQL, Dry, Flooded on Cutting temperature, tool wear,
tool life, surface roughness and economy for turning 16MnCr5 and EN31 Steel by taking I/p
parameters as speed-feed, depth of cut, Qty of lubrication with carbide and HSS inserts.
Tools Used:
MQL set-up consisting of compressor, Surface Measuring Instrument, MINI-TAP Software, etc.
Benefits to the company/Society:
To Save Economy of machining and to reduce the effect (Pollution) of cutting fluid on
Environment when disposed with other requirements intact, the use of Minimum Quantity
Lubrication (MQL) is done in Machining.
EXTRA-CURRICULAR ACTIVITIES, AWARDS AND MEMBERSHIPS
Delivered a Seminar on Topic ‘TPM (Total Productive Maintenance)’ in National Level Technical
Symposium held at PES COE Aurangabad
Delivered a Seminar on Topic ‘Nano-Coating of Machine Tools’ in National Level Technical
Symposium at MIT Aurangabad
Attended a three day’s Seminar on DIGITAL GRAPHICS DESIGNING(it’s Advantages & Scope)
Selected For SSB EXAM (INDIAN ARMY) at Bangalore
Participated in Project Development Event with project Topic ‘Experimental Study Of Set -Up Of
MQL (Minimum Quantity Lubrication)’National Level Technological Extravaganza at Jawaharlal
Nehru Engineering College(MGM) Aurangabad
HOBBIES & INTEREST
Reading Newspaper, Playing Cricket, soccer, gardening
DISC & 7 WORKPLACE DRIVER EVALUATION
STRENGTHS
Bring a sense of genuine enthusiasm to the team and organization
Bring strong sense of quality control to the team’s effort
Able to negotiate conflicts between people and teams in a win-win manner
Tend to demonstrate technical competence, as well as skill in dealing with people
In meetings, communicate my opinions in a appositive and solution-oriented way
* Detailed report on DISC and 7 Workplace drivers available on request
PERSONAL DETAILS
Name : PATHAN ASIF
Date of Birth : 05-08-1989
Sex : Male
Nationality : Indian
Languages Known : English, Hindi, Urdu, Arabic and Marathi
Permanent Address : Plot No 19, Sector-D, N-12, CIDCO, Aurangabad
Place: Aurangabad Date: Aug 2016