Call Girls in Gomti Nagar - 7388211116 - With room Service
Двигатели Brammer-Lonne
1. Electric Motors Chapter 1
Products | Solutions | Service
Chapter 1
Products | Solutions | Service
Electric MotorsElectric Motors Chapter 1
Products | Solutions | Service
2. Electric Motors Chapter 1
2
Certificates
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
Certificates
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
Chapter 1Electric Motors
2
Certificates
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
Electric Motors Chapter 1
2
2
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
2
Lönne motors can be delivered with following certificates
according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order,
without inclusion of test results.
Type 2.2: Test report
Document in which the manufacturer declares that the products
supplied are in compliance with the requirements of the order
and in which he supplies test results based on non- specific
inspection.
Type 3.1: Inspection certificate
Document issued by the manufacturer in which he declares
that the products supplied are in compliance with the
requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the
product specification, the official regulation and corresponding
rules and/ or the order.
The document is validated by the manufacturer’s authorized
inspection representative, independent of the manufacturing
department.
Type 3.2: Inspection certificate
Document prepared by both the manufacturer’s authorized
inspection representative,independent of the manufacturing
department and either the purchaser’s authorized
inspection representative or the inspector designated by the
official regulations and in which they declare that the products
supplied are in compliance with the requirements of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg
or at an external institute.For classified inspection report will
the surveyor be appointed by ourselves or by our clients.
Marine Classifications:
The most common Marine Classification Bureaus are:
Det Norske Veritas, Lloyd's Register of Shipping,ABS,
Bureau Veritas, Germanisher Lloyd, China Classification
Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see
page 41.
2
We hereby reserve the right to change content of data in this
catalogue at any time without notice.
Our company shall not be held responsible for neither possible
discrepancies in catalogue content nor any damage caused by
wrong use of products or information. Lönne Scandinavia AS
reserves the prohibition to publish pages or whole parts of this
catalogue without authorization. All product names occurring or
referred to in this catalogue are or may be registered trademarks
belonging to their respective producers or trademark owners.
The dimensions are in mm.
Illustrations are not binding.
Electric MotorsElectric Motors Chapter 1
4
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Chapter 1Electric Motors
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
4
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
4
Electric Motors Chapter 1
3. Electric Motors Chapter 1
3
Index
New Ecodesigns Requirements for Electric Motors 4
Energy saving motors 2 Pole / 4 Pole / 6 Pole /8 Pole 6
Marine Motors 2 Pole / 4 Pole / 6 Pole / 8 Pole 10
2- speed Motors 2/4 Pole 4/6 Pole 4/8 Pole 14
New IE3 Premium Efficiency 17
Dimensions Shafts and Flanges 18
Overaall Dimensions 20
Single phase Motors 24
Mounting Options 26
Spare part illustration 27
Terminal Marking/ Connections 28
Brakes 29
External Cooling Fan Unit 30
Design, Painting Colours, Balance and Vibration Severity 31
Bearing and Lubrication 32
Degree of Protection 33
Insulation System 34
Ambient Temperature and Humidity 35
Motor Protection and Anti Condensation Heaters 36
Technical Information Noise Level 37
Safety and Commissioning for Low Voltage Asynchronous Moto 38
Optimal, Energy Saving Operations by Frequency Inverters 40
Type Approval DNV 41
Flameproof Motors Ex d, Ex de IIB, II 42
General aspects of the Atex Directive 43
Combines type of Protection 45
Supplementary Marking 46
Example of Markings 47
Motors fed by Ferquency Converters 48
EMC REquirements for the Installation 49
Tables EEx d IIB, IP65 2 Pole / 4 Pole / 6 Pole / 8 Pole 50
Dimensions D5 71-132 IM Series 54
Water Jacket, Three Phase, Squirrel Cage, Induction Motors 63
General Features 64
Technical Features 65
Sound Levels 66
Technical Data Low Voltage 67
Standard Configuration Options 68
Terminal Box Dimensions 69
Important addresses and phone numbers. General info. 71
PageIndex
New Ecodesigns Requirements for Electric Motors 4
Energy saving motors 2 Pole / 4 Pole / 6 Pole /8 Pole 6
Marine Motors 2 Pole / 4 Pole / 6 Pole / 8 Pole 10
2- speed Motors 2/4 Pole 4/6 Pole 4/8 Pole 14
New IE3 Premium Efficiency 17
Dimensions Shafts and Flanges 18
Overaall Dimensions 20
Single phase Motors 24
Mounting Options 26
Spare part illustration 27
Terminal Marking/ Connections 28
Brakes 29
External Cooling Fan Unit 30
Design, Painting Colours, Balance and Vibration Severity 31
Bearing and Lubrication 32
Degree of Protection 33
Insulation System 34
Ambient Temperature and Humidity 35
Motor Protection and Anti Condensation Heaters 36
Technical Information Noise Level 37
Safety and Commissioning for Low Voltage Asynchronous Moto 38
Optimal, Energy Saving Operations by Frequency Inverters 40
Type Approval DNV 41
Flameproof Motors Ex d, Ex de IIB, II 42
General aspects of the Atex Directive 43
Combines type of Protection 45
Supplementary Marking 46
Example of Markings 47
Motors fed by Ferquency Converters 48
EMC REquirements for the Installation 49
Tables EEx d IIB, IP65 2 Pole / 4 Pole / 6 Pole / 8 Pole 50
Dimensions D5 71-132 IM Series 54
Water Jacket, Three Phase, Squirrel Cage, Induction Motors 63
General Features 64
Technical Features 65
Sound Levels 66
Technical Data Low Voltage 67
Standard Configuration Options 68
Terminal Box Dimensions 69
Important addresses and phone numbers. General info. 71
PageIndex
Chapter 1Electric Motors
3
New Ecodesigns Requirements for Electric Motors 4
Energy saving motors 2 Pole / 4 Pole / 6 Pole /8 Pole 6
Marine Motors 2 Pole / 4 Pole / 6 Pole / 8 Pole 10
2- speed Motors 2/4 Pole 4/6 Pole 4/8 Pole 14
New IE3 Premium Efficiency 17
Dimensions Shafts and Flanges 18
Overaall Dimensions 20
Single phase Motors 24
Mounting Options 26
Spare part illustration 27
Terminal Marking/ Connections 28
Brakes 29
External Cooling Fan Unit 30
Design, Painting Colours, Balance and Vibration Severity 31
Bearing and Lubrication 32
Degree of Protection 33
Insulation System 34
Ambient Temperature and Humidity 35
Motor Protection and Anti Condensation Heaters 36
Technical Information Noise Level 37
Safety and Commissioning for Low Voltage Asynchronous Moto 38
Optimal, Energy Saving Operations by Frequency Inverters 40
Type Approval DNV 41
Flameproof Motors Ex d, Ex de IIB, II 42
General aspects of the Atex Directive 43
Combines type of Protection 45
Supplementary Marking 46
Example of Markings 47
Motors fed by Ferquency Converters 48
EMC REquirements for the Installation 49
Tables EEx d IIB, IP65 2 Pole / 4 Pole / 6 Pole / 8 Pole 50
Dimensions D5 71-132 IM Series 54
Water Jacket, Three Phase, Squirrel Cage, Induction Motors 63
General Features 64
Technical Features 65
Sound Levels 66
Technical Data Low Voltage 67
Standard Configuration Options 68
Terminal Box Dimensions 69
Important addresses and phone numbers. General info. 71
Page
Electric Motors Chapter 1
3
Electric Motors
4. Electric Motors Chapter 1
4
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Chapter 1Electric Motors
New Ecodesign Requirements for Electric Motors
Implementing Directive2005/32/ EC of the European Parliament and of the Council
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
4
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
4
Electric Motors Chapter 1
5. Electric Motors Chapter 1
5
EU RegulationsEU RegulationsEU Regulations
Chapter 1Electric Motors
5
Electric Motors Chapter 1
5
6. Electric Motors Chapter 1
6
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 2- Pole Motors
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 2- Pole Motors
Chapter 1Electric Motors
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 2- Pole Motors
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
6
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
6
Electric Motors Chapter 1
7. Electric Motors Chapter 1
7
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 4- Pole Motors
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 4- Pole Motors
Chapter 1Electric Motors
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 4- Pole Motors
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
7
Additional data for 60Hz on request. Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
7
Electric Motors Chapter 1
8. Electric Motors Chapter 1
8
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 6- Pole Motors
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 6- Pole Motors
Chapter 1Electric Motors
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 6- Pole Motors
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
8
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
8
Electric Motors Chapter 1
9. Electric Motors Chapter 1
9
Energy- saving motors with "high efficiency "
Technical data for standard execution, S1- duty, IP55, 8- Pole Motors
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
Energy- saving motors with "high efficiency "
Technical data for standard execution, S1- duty, IP55, 8- Pole Motors
Chapter 1Electric Motors
Energy- saving motors with "high efficiency "
Technical data for standard execution, S1- duty, IP55, 8- Pole Motors
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
9
Additional data for 60Hz on request.
Other Sizes and Voltages on request.
1TZ9 A = Aluminium og 1TZ9 C = Cast Iron.
a) Increased rated output.
Please note that the data for the efficiency grades are according to the EU nomenclatures .
On request, we can provide youwith real measured value.
Formula for current with new voltage: I'n (new) = In (with 400V) •
400
U (new voltage)
9
Electric Motors Chapter 1