LED tube aging line behind the LED assembly line

1. 1 ETA LED Tube Aging Line Products Introduction | ETA
www.smt11.com
Full SMT Solution Provider
LED Tube Aging Line
Introduce：
The aging line is a special equipment for lighting production. It is suitable for automatic aging of different tube LED lamps. Through the
sophistication of high and low voltage, high temperature and high voltage, impulse voltage and analog fluctuation voltage, we can observe
whether these products can withstand the impact of these voltages, so as to improve the quality of these products. High-power voltage
regulator, strong power output, all kinds of LED tube lamp products can complete aging on this equipment, to provide comprehensive quality
assurance for your products.
Features：
1, Using PLC programming and display control, the complex circuit structure is optimized, with a high-level intelligent operation interface and
input of display instructions, which makes the control more accurate and easy to operate.
2, The use of analog voltage gradually impact and switch on the LED lamp, improve the quality of the LED lamp, peak-valley voltage layout, high
temperature and high voltage system, ultra-low voltage start-up and instantaneous high voltage system.
3, Adopting new conductive mode and two operation modes of impact/aging in each region, automatic generation of voltage conversion,
flexible and diverse operation mode, automatic conversion of sophisticated mode.
4, The device dedicated to the exchange of LED Tube, 220V, 110V LED energy-saving lamps finished detection aging voltage of 220V LED
energy-saving lamps, high-voltage, medium-voltage, atmospheric pressure and low-pressure, high-temperature, roaming, shock zone observe
the LED energy-saving lamps can be passed above voltage segment aging test.
5,The safety net: online body assembly a protective drop resistance network, smash off the lights to prevent production of high quality stainless
steel pore network, specification 15000 × 1400mm on both sides with universal Jiaotie fixed.
6, control elements: with ammeter, digital voltmeter and lights to display the input voltage and three-phase current. The system adopts
Mitsubishi PLC and 7-inch touch screen control to adjustable shocks aging time and start-stop transportation
Materials：
1. Power plant: 1.5KW Taiwan Dongyi brand motor, Hangzhou Jiacheng 80 1:100 speed reducer, Xinjie 2HP frequency converter, variable
frequency stepless speed regulation, line speed 0-3.5M/min adjustable, power tension head and tail using cast iron standard large base
adjustment, convenient, fast and durable.
2. Supporting frame: 40X40X1.5mm square pipe welding, supporting foot with galvanized adjustable foot cup.
3. Pull body: It is made of 130X23X2mm high-quality aluminium alloy profile, and the protective plate is made of 1.2mm cold plate bending.
4. Conveyor chain: Taiwan Chain Factory produces 2060 single-sided K2 accessory chain with double pitch and single earhole.
5. Chain plate: 2.0mm thick iron plate bending production, specifications 1400X148mm, (the whole line about 140 chains) according to
different products, according to the proportion of installation quantity. Fixed support of T8 bracket is installed on each chain board of solar tube,
which is made of 5 mm PVC insulating board and fixed with conductive sheet. Positive pole power supply support adopts adjustable speed and

2. 2 ETA LED Tube Aging Line Products Introduction | ETA
www.smt11.com
Full SMT Solution Provider
adjustable speed.
Configuration
Item Brand Note
Belt Green Anti-static PVC belt(400*2mm), Seamless China
Motor 2HP,made by AIDELI Taiwan
Retarder 80#,made by AIDELI Taiwan
inverter 2HP,made by AIDELI Taiwan
Main body 40×40MM aluminium China
operation card 25×14“H” aluminium China
Lighting 40W lighting，lamp by FSL China
Drive roller ø25mm roller China
Rail 40×60MM aluminium China
Air switch DELIXI China
Specification:
Size (L)12000*(W)1620*(H) 1650±20mm(The length can be adjusted by customer)
Transport Manners trolley
Drive system Taiwan motor(2HP)and 80# Retarder, inverter made by adlaspower,speed range 0-2m/min
Total power 40KW
Voltage area 6 boosters for 6 zones,voltage range from 0 to 250V.
voltage regulator 6sets,each set 10KW
Controlling method Touch screen+PLC(digital voltmeter,PLC control trough touch screen,with 6 boosters)
Main body
1,50×50×2mm rectangular tube steel as frame,work-station height 1200 ±20mm
2,conducting system adopt high quality stainless steel
* The data is obtained under ambient temperature of 25℃ and humidity of 60%
Thanks for choosing ETA.
ETA looks forward to win-win cooperation.