1. Anup Sona__________________________________ ______
6A-406, Kalpataru Serenity, Manjiri,
Pune, Maharashtra
Email : sonaanup@yahoo.com
Phone: +91-7709111933, 7798242422
Objective: Seeking a challenging career opportunity in the Oil and Gas Sector.
Education : Bachelor of Engineering in Mechanical Engineering from Assam Engineering
College (Gauhati University) in the year 1997.
Work Experience: Total 18 years(10 years with oil & Gas field)
1.Halliburton Offshore India Inc. Sept. 2010 till date
Lead Directional Driller
Responsibilities: Offshore & Onshore(Client: ONGC& Cairn Energy, GEECL)
• Worked Offshore with Steerable Mud Motors and MWD Worked in Re-entry wells through
Whipstocks. Drilled various profile of well like high angle, Horizontal and ‘J’ type. Kick-off wells
with scribing drill pipe or With DYRO Tools and drilling wells with anti-collision scenario.
• Executed drilling of 17 ½” Pilot hole section, 26” hole opener section, 17 ½” hole section. 12 ¼”
hole section, 8 1/2” hole section, 6” hole section.
• Executed Open Hole Sidetrack.
• Running Hydraulics simulation, Torque n Drag, BHA Design and using MaxBHA software for
behavior analysis. Running Compass for proximity scanning for collision risk.
• Involve drilling bit and bottom hole assembly design and hydraulics.
• Design Hydraulics & BHA to maximise Bit life and drilling rate.
• Worked with Hydro-mechanical D/Jar.

2. • Operational analysis of surface parameters to optimize drilling.
• Worked on CBM Project using SDMM and EM MWD Tools.
• Drilled Producer & Injector well (High angle) drilled with Geo-Pilot RSS tool (9600, 7600) and
Sperry Drill mud Motor on Cairn Project.
• Working as a lead DD and coordinating link between client site representative and office.
Software uses: Compass, Insite and planit
2. SAIC India Pvt. Ltd, Noida, India Feb. 2009 to Sept. 2010
Associate Manager
Responsibilities:
• Investigated cause of locking, possible interference with the help of tolerance stack-up
analysis for worst case bending along with applying dog leg curvature to outer shell for
GP5200 RSS tool.
3. Schlumberger Global Support Centre Ltd. Pune July 2007 to Jan 2009
Sr. Mechanical Engineer
Responsibilities:
• Build up Standards and Processes for managing work.
• Developed and trained the new engineers to handle project work independently.
• Worked with L/MWD sustaining activity.
Job Undertaken:
Worked with Collar design to reduce the cost by:
• Investigated the area and the manufacturing processes and method that increased the
cost of the Collar and changed accordingly.
• Changed the material and the manufacturing method to reduce the cost without affecting
its performance.
4. Scicom Technologies Ltd, India Feb 2006 to July 2007.
Asstt. Consultant
Responsibilities:

3. • Worked on RTAs (Request for Technical Assistance). Investigated the field problem
reported in RTA for various drilling tools, evaluation tools and find out the solution
according to the formation.
5. Awal Gulf Manufacturing, Bahrain April 2005 to Feb 2006.
Sr. Design Engineer
Responsibilities:
• Sheet metal component design for central Air conditioning.
• Making the prototype and checking the fitment & testing.
6. Hero Motors Ltd, India June 2002 to March 2005.
Asstt. Manager
Responsibilities:
• Plastic and Sheet metal component design for two wheelers.
• Involved with Design activity & tool path generation for 3-Axis milling machine.
7. Autolite India Ltd. Jaipur Feb 1998 to May 2002.
Design Engineer
Responsibilities:
• Design of four wheeler Head Lamp.
• Involved with sustaining activity & tool path generation for 3-Axis milling machine.
BIOGRAPHY:
1. Passport Number: H4309809
2. Marital status : Married
Permanent Add:
Near Nakari Club,
Ward No. 1
P.O. North Lakhimpur
Dist- Lakhimpur
Assam