na

1. PROCEDURE TO SETUP EI-T1
& EI-T2 FTP SETTINGS

2. FTP Setting
STEP 1- In Control Panel window, click Programs and
Features.
STEP 2-Click Turn Windows features on or off

3. STEP 3 -Find and Click on the FTP Service and IIS
Management Console. Then Click OK.
STEP 4 - Wait for Setting changed and then click Close.

4. STEP 5-Press window button, and then type iis. Then
click on Internet Information Services (IIS) Manager.
STEP 6 - Click Sites, then Click Add FTP Site…

5. STEP 7:
Type name of the Terminal.
EI-T1 for Terminal 1
EI-T2 for Terminal 2
STEP 8:
Type Physical path as below, then click Next.
C:Hitachi_MitoCBTC_Control_TerminalDataCou
nters

6. STEP 9 - Type IP Address of Terminal LAN1 of own PC.
STEP10- Remove the check of Enable Virtual Host
Names check box.
STEP11- Check the Start FTP site automatically check
box.
STEP12- Select No SSL radio button. Then click Next.

7. STEP13- Check Authentication check box.
STEP14- Select All users for Allow access to.
STEP15- Check the Read and Write check box for
Permissions.
STEP16- Click Finish.

8. STEP17- Click site of the other EI Terminal, then Click
Bindings…

9. STEP18- Click Add.
STEP19- Select ftp for Type.
STEP20- Select the IP address of the other EI-T.
STEP21- Type 21 for Port. Then click OK.
STEP22- Both EI-T1 & EI-T2 ip addreess has to
be speciefied in both the systems(EI-T1 & EI-T2)

10. Monitor settings .
Open hitachi mitho-monitor-ini-monitor def1 file to be
modified as per the station specific IP.
LAN1=10.113.27.33
LAN2=11.213.27.33
NOTE: 27 IS THE STATION CODE FOR KESHAVGANJ

11. Monitor settings .
Open hitachi mitho-monitor-ini-monitor def2 file to be
modified as per the station specific IP.
LAN1=10.113.27.32
LAN2=11.213.27.32
NOTE: 27 IS THE STATION CODE FOR KESHAVGANJ