PROCEDURE TO SETUP EI-T1 EI-T2 FTP SETTINGS.pdf
•
0 likes•9 views
This document provides steps to setup FTP settings for two terminals, EI-T1 and EI-T2. It involves enabling the FTP service in Windows, adding FTP sites in IIS Manager, configuring bindings and permissions for each site, and modifying configuration files to specify the IP addresses of each terminal. The key steps are to name the FTP sites for each terminal, specify the physical path and IP address, enable authentication and allow read/write permissions, and add bindings for the other terminal's IP address. Configuration files also need to be modified with the specific LAN IP addresses for each terminal.
Report
Share
Report
Share
Download to read offline
Recommended
C5x commissioning PPT.PPTX
The document provides steps for commissioning a C5x wireless link, including:
1. Logging in to the access point (base) end and configuring the IP, VLAN, and SNMP settings.
2. Configuring the link parameters such as mode, SSID, encryption, and performing a site survey.
3. Configuring the channel, power, and antenna settings and starting alignment at the station (terminal) end to achieve the required signal level.
4. Performing a throughput test to check the connection and complete the commissioning process.
Router and switch basics configuration
The document provides instructions for basic operations on Cisco routers and switches including connecting to devices, erasing configurations, recovering passwords, creating VLANs, saving configurations, loading and saving IOS images using TFTP, and setting up a TFTP server. The instructions cover topics such as connecting via console cable, erasing startup configurations, recovering passwords for different models by changing configuration register values, creating VLANs on specific switch models by assigning ports, saving configurations to flash or TFTP server, copying IOS images to and from a TFTP server, and creating a monitor port on a switch to capture traffic on a port or VLAN.
Configuration and testing of network
The document provides steps to configure a workstation to join a local area network. It involves setting the workstation's IP address, subnet mask, and default gateway. These settings can be configured automatically or manually. The document also describes how to use the ping command to test network connectivity and troubleshoot any connection issues.
Quick installation guide
1. The document provides instructions for installing a wired/wireless IP camera, including installing hardware and software, accessing live video, and troubleshooting common issues.
2. It describes how to set up the ActiveX control to view live video in Internet Explorer and how to perform wireless settings by scanning for available networks and inputting encryption keys.
3. Instructions are given for using dynamic DNS (DDNS) to access the camera remotely over the internet, including registering for a DDNS account, configuring DDNS settings on the camera, changing ports, and setting up port forwarding on the router.
Wi fi ruckus config
1) The document provides step-by-step instructions for configuring the ZF7025 as a standalone access point, including connecting it to a PoE switch or injector, logging into the web interface using default credentials, and configuring basic wireless settings like enabling wireless availability, broadcasting the SSID, and assigning a unique SSID name.
2) Key steps include preparing the admin computer with a static IP in the 192.168.0.x range, logging in at 192.168.0.1 with username "super" and password "sp-admin", and configuring the common and wireless settings tabs to enable and name at least one wireless network.
3) Default wireless settings include individual
Configuring sonic wall__port_forwarding
This document provides instructions for configuring port forwarding on a SonicWALL firewall to allow external access to internal FTP, SMTP, and DNS servers located on the local network. It explains how to create access rules and NAT policies to forward specific ports to the internal servers using both the Standard and Enhanced firmware. Verification steps are included to check that the port forwarding configurations are working properly.
Microsoft Lync Server 2010 Installation
This document released long back, but not uploaded in my blog site...and later on released it publicly.
Wifi doesn't have a valid IP configuration in Windows 10
This document outlines 10 methods for fixing the "Wifi doesn't have a valid IP configuration Windows 10" error. The methods include resetting TCP/IP settings, manually assigning IP addresses, changing DHCP user limits, performing a clean boot, updating wireless drivers, enabling wireless services, and uninstalling antivirus software. Step-by-step instructions are provided for each troubleshooting method.
Recommended
C5x commissioning PPT.PPTX
The document provides steps for commissioning a C5x wireless link, including:
1. Logging in to the access point (base) end and configuring the IP, VLAN, and SNMP settings.
2. Configuring the link parameters such as mode, SSID, encryption, and performing a site survey.
3. Configuring the channel, power, and antenna settings and starting alignment at the station (terminal) end to achieve the required signal level.
4. Performing a throughput test to check the connection and complete the commissioning process.
Router and switch basics configuration
The document provides instructions for basic operations on Cisco routers and switches including connecting to devices, erasing configurations, recovering passwords, creating VLANs, saving configurations, loading and saving IOS images using TFTP, and setting up a TFTP server. The instructions cover topics such as connecting via console cable, erasing startup configurations, recovering passwords for different models by changing configuration register values, creating VLANs on specific switch models by assigning ports, saving configurations to flash or TFTP server, copying IOS images to and from a TFTP server, and creating a monitor port on a switch to capture traffic on a port or VLAN.
Configuration and testing of network
The document provides steps to configure a workstation to join a local area network. It involves setting the workstation's IP address, subnet mask, and default gateway. These settings can be configured automatically or manually. The document also describes how to use the ping command to test network connectivity and troubleshoot any connection issues.
Quick installation guide
1. The document provides instructions for installing a wired/wireless IP camera, including installing hardware and software, accessing live video, and troubleshooting common issues.
2. It describes how to set up the ActiveX control to view live video in Internet Explorer and how to perform wireless settings by scanning for available networks and inputting encryption keys.
3. Instructions are given for using dynamic DNS (DDNS) to access the camera remotely over the internet, including registering for a DDNS account, configuring DDNS settings on the camera, changing ports, and setting up port forwarding on the router.
Wi fi ruckus config
1) The document provides step-by-step instructions for configuring the ZF7025 as a standalone access point, including connecting it to a PoE switch or injector, logging into the web interface using default credentials, and configuring basic wireless settings like enabling wireless availability, broadcasting the SSID, and assigning a unique SSID name.
2) Key steps include preparing the admin computer with a static IP in the 192.168.0.x range, logging in at 192.168.0.1 with username "super" and password "sp-admin", and configuring the common and wireless settings tabs to enable and name at least one wireless network.
3) Default wireless settings include individual
Configuring sonic wall__port_forwarding
This document provides instructions for configuring port forwarding on a SonicWALL firewall to allow external access to internal FTP, SMTP, and DNS servers located on the local network. It explains how to create access rules and NAT policies to forward specific ports to the internal servers using both the Standard and Enhanced firmware. Verification steps are included to check that the port forwarding configurations are working properly.
Microsoft Lync Server 2010 Installation
This document released long back, but not uploaded in my blog site...and later on released it publicly.
Wifi doesn't have a valid IP configuration in Windows 10
This document outlines 10 methods for fixing the "Wifi doesn't have a valid IP configuration Windows 10" error. The methods include resetting TCP/IP settings, manually assigning IP addresses, changing DHCP user limits, performing a clean boot, updating wireless drivers, enabling wireless services, and uninstalling antivirus software. Step-by-step instructions are provided for each troubleshooting method.
Final ppt
The document describes a mobile commerce presentation that was submitted by Punita Uttam. It discusses the features and functionality of a mobile commerce website including providing an interface for customers to buy and view mobile details, purchase and stock management, and providing important updates to customers. It also outlines the waterfall software model being followed, technologies used including ASP.NET and SQL Server 2012, hardware and software requirements, user types of the system, ER diagram, data flow diagrams, and steps to deploy the website using IIS.
Mobile Commerce ppt....... Provides a website interface to the customers to b...
*Provides an interface to the customers to buy & get the details about mobiles.
*Contains information of all the upcoming mobiles of different brands in the market.
*Purchase & stock Management.
*All customers will get all important updates via website.
*Website development which would help to buy, order & remain updated in just a click.
manual vvtk camera_st7501
The document provides instructions for setting up and using a VIVOTEK network camera test lab. It includes chapters on preparation, installation, using the Installation Wizard 2 software, camera configuration, and using the ST7501 client/server software. Some key points:
- Chapter 1 discusses necessary lab components and how to connect the camera.
- Chapter 2 covers installing the Installation Wizard 2 and ST7501 software, including selecting installation directories and options.
- Chapter 3 describes the Installation Wizard 2 user interface and how it analyzes the network environment.
- Chapter 4 provides steps for configuring camera cropping through the viewing window page to define the region of interest and output frame size.
Escene es282 pc ip phone user manual
The document is a user manual for the ES282-PC IP Smart VoIP Phone. It provides instructions on setting up the phone and describes its key features and functions. The phone has a color LCD screen, supports multiple SIP accounts and lines, and allows users to place and receive calls, access call logs and contacts, and adjust settings through either the phone's interface or a web UI. The manual guides users through basic call operations, advanced settings, and phone maintenance to help them successfully use the ES282-PC VoIP phone.
TekFAX Manual
This document provides instructions for installing and configuring TekFax version 1.7 fax server software. It describes system requirements, installing the software, and configuring settings for the TekFax service including SIP accounts and SMTP settings. It also explains how to monitor active calls, define fax recipients, and troubleshoot issues using log files.
install active directory and configure domain controller
This document provides instructions for installing Active Directory and configuring a domain controller on a server. It outlines the steps to change the computer name and assign a static IP address before installation. It then details installing the Active Directory Domain Services role and promoting the server to a domain controller, including setting domain and forest options. The summary provides an overview of the key configuration steps.
Windows 2012 server
How To Install Windows server 2012? How to create Hyper-V Virtual Machine in Windows? What are Protocols and their types?
Fire Eye Appliance Quick Start
This document provides instructions for quickly installing and setting up a FireEye appliance. The FireEye appliance can identify malware attacks on a network, block attacks, and alert administrators. Setup instructions are provided for using either the front panel LCD or a serial console. The steps include mounting the appliance, connecting network cables, powering on, and configuring basic network and security settings using a menu interface. Additional documentation is referenced for more complete configuration and usage information.
Lan and internet sharing xp
The document provides steps to change a workgroup name and assign IP addresses in a network. To change the workgroup name, go to computer properties, select the computer name tab, and change the workgroup name to be the same across all systems. To assign IP addresses, connect all systems to a hub, go to network properties, select local area connection properties, select internet protocol properties, choose use following IP address, enter a unique 192.168.1.x address for each system with subnet mask 255.255.255.0.
Mikro tik site to site eoip tunnel with i psec
This document provides instructions for configuring a site-to-site EoIP VPN tunnel with IPsec between two MikroTik routers to connect two private networks. It involves:
1) Configuring basic settings like IP addresses, DNS, and NAT on each router
2) Creating an EoIP tunnel interface on each router with matching IDs and IPsec secrets
3) Assigning IP addresses to the tunnel interfaces
4) Adding static routes on each router to allow communication between the LANs over the tunnel
Lab 4 Configure End Devices.pdf
This document provides instructions for configuring various end devices in Packet Tracer, including a server, two PCs, and a switch. Students are asked to:
1. Build a network topology connecting a server, two PCs, and a switch.
2. Configure IP addresses on the server, PC0, and PC1, then validate the connections by pinging between devices and accessing the server web page from PC1.
3. Access the switch CLI and change the switch name, then shut down two interfaces to disable those connections.
Screenshots should be provided showing the completion of each step.
T hin client configuration
The document provides instructions for configuring a system for remote access in 5 steps: 1) Check the system settings and network connections, 2) Configure the network IP and settings, 3) Create user accounts, 4) Enable remote desktop connections, and 5) Change remote security settings. Finally, the software is installed and patched on the server to allow multi-user access from client systems remotely. Proper IP addressing and matching user accounts are required to successfully connect from client to server.
ACN Micro- Project Group no. 22.pptx
This document provides steps to configure an FTP server. It involves setting up routers, switches and PCs on different subnets and assigning IP addresses. An FTP service is enabled on the server and a username and password are created. A file is uploaded from a PC to the FTP server and downloaded to another PC to test the file transfer functionality of the FTP server. The objectives are achieved which are to configure FTP services, upload a file to the server and download a file from the server.
I notes and sametime integration open mic_2013
This document provides an overview of integrating IBM Notes and IBM Sametime using two different methods: the traditional stlinks method and the newer Sametime web client integration method. It outlines the basic steps to configure each method, including specifying the Sametime server FQDN, replicating authentication databases, and configuring the buddy list for the stlinks method. Troubleshooting tips are also provided for common issues like missing awareness, authentication errors, and buddy list errors. Key differences between the methods are described, such as additional proxy server requirements and supported authentication for the web client method. Useful links to documentation for complete configuration instructions and troubleshooting are included.
ccna 1 chapter 2 v5.0 exam answers 2014
This document provides the questions and answers for CCNA 1 Chapter 2 exam from the CCNA Routing and Switching v5.0 curriculum. It includes 20 multiple choice questions about networking concepts like IP addressing, DHCP, passwords, and Cisco IOS commands. Answering practice questions is helpful for studying for the CCNA certification.
SOP - 2013 Server Build
This document provides a checklist for building an MS Windows Server 2008 machine. It outlines 14 high-level steps: 1) Prepare required paperwork; 2) Configure hardware or virtual machine; 3) Prepare the server environment; 4) Install Windows Server OS; 5) Customize the desktop and power settings; 6) Configure core server settings; 7) Install necessary agents and add-ons; and 8) Mark the build complete upon installing required VMware or hardware tools. It also provides additional pages of detailed instructions for each step.
Migrating to Exchange 2010 and ad 2080 r2
This document provides an overview and agenda for migrating from Exchange Server 2003 and Active Directory 2008 to Exchange Server 2010 and Active Directory 2008 R2. The key steps include installing prerequisites, installing Exchange 2010, configuring Exchange 2010, migrating mailboxes and public folders from Exchange 2003, updating DNS, and removing the legacy Exchange 2003 servers once the migration is complete. PowerShell commands are provided as alternatives to the graphical user interface for many configuration tasks.
Integra sppt-elastix-asterisk-configuration
This document provides steps to configure an Elastix PBX appliance to interface with Integra Telecom's SIP trunking service. It outlines 13 steps to add SIP trunks, outbound routes, and inbound routes. Key settings include configuring the trunk with Integra's SIP credentials and setting the outbound dial patterns to route via the Integra trunk. Troubleshooting tips are provided to test connectivity on both the customer and Integra networks.
Ftth residential-wifi-modem-guide
This document provides instructions for setting up and using a residential gateway model TG784n. It includes sections on hardware setup, installation requirements, an easy setup wizard for initial configuration, manual configuration instructions, wireless network setup, port forwarding configuration, and troubleshooting. The easy setup wizard guides the user through selecting an internet and voice service, and entering credentials to automatically configure the gateway for basic connectivity and services.
Setup VoIP System and Interconnection with LTE network
Setting up VoIP management server using a communication framework and let the users from LTE networks to register and make voice calls over IP system as well as video session.
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
More Related Content
Similar to PROCEDURE TO SETUP EI-T1 EI-T2 FTP SETTINGS.pdf
Final ppt
The document describes a mobile commerce presentation that was submitted by Punita Uttam. It discusses the features and functionality of a mobile commerce website including providing an interface for customers to buy and view mobile details, purchase and stock management, and providing important updates to customers. It also outlines the waterfall software model being followed, technologies used including ASP.NET and SQL Server 2012, hardware and software requirements, user types of the system, ER diagram, data flow diagrams, and steps to deploy the website using IIS.
Mobile Commerce ppt....... Provides a website interface to the customers to b...
*Provides an interface to the customers to buy & get the details about mobiles.
*Contains information of all the upcoming mobiles of different brands in the market.
*Purchase & stock Management.
*All customers will get all important updates via website.
*Website development which would help to buy, order & remain updated in just a click.
manual vvtk camera_st7501
The document provides instructions for setting up and using a VIVOTEK network camera test lab. It includes chapters on preparation, installation, using the Installation Wizard 2 software, camera configuration, and using the ST7501 client/server software. Some key points:
- Chapter 1 discusses necessary lab components and how to connect the camera.
- Chapter 2 covers installing the Installation Wizard 2 and ST7501 software, including selecting installation directories and options.
- Chapter 3 describes the Installation Wizard 2 user interface and how it analyzes the network environment.
- Chapter 4 provides steps for configuring camera cropping through the viewing window page to define the region of interest and output frame size.
Escene es282 pc ip phone user manual
The document is a user manual for the ES282-PC IP Smart VoIP Phone. It provides instructions on setting up the phone and describes its key features and functions. The phone has a color LCD screen, supports multiple SIP accounts and lines, and allows users to place and receive calls, access call logs and contacts, and adjust settings through either the phone's interface or a web UI. The manual guides users through basic call operations, advanced settings, and phone maintenance to help them successfully use the ES282-PC VoIP phone.
TekFAX Manual
This document provides instructions for installing and configuring TekFax version 1.7 fax server software. It describes system requirements, installing the software, and configuring settings for the TekFax service including SIP accounts and SMTP settings. It also explains how to monitor active calls, define fax recipients, and troubleshoot issues using log files.
install active directory and configure domain controller
This document provides instructions for installing Active Directory and configuring a domain controller on a server. It outlines the steps to change the computer name and assign a static IP address before installation. It then details installing the Active Directory Domain Services role and promoting the server to a domain controller, including setting domain and forest options. The summary provides an overview of the key configuration steps.
Windows 2012 server
How To Install Windows server 2012? How to create Hyper-V Virtual Machine in Windows? What are Protocols and their types?
Fire Eye Appliance Quick Start
This document provides instructions for quickly installing and setting up a FireEye appliance. The FireEye appliance can identify malware attacks on a network, block attacks, and alert administrators. Setup instructions are provided for using either the front panel LCD or a serial console. The steps include mounting the appliance, connecting network cables, powering on, and configuring basic network and security settings using a menu interface. Additional documentation is referenced for more complete configuration and usage information.
Lan and internet sharing xp
The document provides steps to change a workgroup name and assign IP addresses in a network. To change the workgroup name, go to computer properties, select the computer name tab, and change the workgroup name to be the same across all systems. To assign IP addresses, connect all systems to a hub, go to network properties, select local area connection properties, select internet protocol properties, choose use following IP address, enter a unique 192.168.1.x address for each system with subnet mask 255.255.255.0.
Mikro tik site to site eoip tunnel with i psec
This document provides instructions for configuring a site-to-site EoIP VPN tunnel with IPsec between two MikroTik routers to connect two private networks. It involves:
1) Configuring basic settings like IP addresses, DNS, and NAT on each router
2) Creating an EoIP tunnel interface on each router with matching IDs and IPsec secrets
3) Assigning IP addresses to the tunnel interfaces
4) Adding static routes on each router to allow communication between the LANs over the tunnel
Lab 4 Configure End Devices.pdf
This document provides instructions for configuring various end devices in Packet Tracer, including a server, two PCs, and a switch. Students are asked to:
1. Build a network topology connecting a server, two PCs, and a switch.
2. Configure IP addresses on the server, PC0, and PC1, then validate the connections by pinging between devices and accessing the server web page from PC1.
3. Access the switch CLI and change the switch name, then shut down two interfaces to disable those connections.
Screenshots should be provided showing the completion of each step.
T hin client configuration
The document provides instructions for configuring a system for remote access in 5 steps: 1) Check the system settings and network connections, 2) Configure the network IP and settings, 3) Create user accounts, 4) Enable remote desktop connections, and 5) Change remote security settings. Finally, the software is installed and patched on the server to allow multi-user access from client systems remotely. Proper IP addressing and matching user accounts are required to successfully connect from client to server.
ACN Micro- Project Group no. 22.pptx
This document provides steps to configure an FTP server. It involves setting up routers, switches and PCs on different subnets and assigning IP addresses. An FTP service is enabled on the server and a username and password are created. A file is uploaded from a PC to the FTP server and downloaded to another PC to test the file transfer functionality of the FTP server. The objectives are achieved which are to configure FTP services, upload a file to the server and download a file from the server.
I notes and sametime integration open mic_2013
This document provides an overview of integrating IBM Notes and IBM Sametime using two different methods: the traditional stlinks method and the newer Sametime web client integration method. It outlines the basic steps to configure each method, including specifying the Sametime server FQDN, replicating authentication databases, and configuring the buddy list for the stlinks method. Troubleshooting tips are also provided for common issues like missing awareness, authentication errors, and buddy list errors. Key differences between the methods are described, such as additional proxy server requirements and supported authentication for the web client method. Useful links to documentation for complete configuration instructions and troubleshooting are included.
ccna 1 chapter 2 v5.0 exam answers 2014
This document provides the questions and answers for CCNA 1 Chapter 2 exam from the CCNA Routing and Switching v5.0 curriculum. It includes 20 multiple choice questions about networking concepts like IP addressing, DHCP, passwords, and Cisco IOS commands. Answering practice questions is helpful for studying for the CCNA certification.
SOP - 2013 Server Build
This document provides a checklist for building an MS Windows Server 2008 machine. It outlines 14 high-level steps: 1) Prepare required paperwork; 2) Configure hardware or virtual machine; 3) Prepare the server environment; 4) Install Windows Server OS; 5) Customize the desktop and power settings; 6) Configure core server settings; 7) Install necessary agents and add-ons; and 8) Mark the build complete upon installing required VMware or hardware tools. It also provides additional pages of detailed instructions for each step.
Migrating to Exchange 2010 and ad 2080 r2
This document provides an overview and agenda for migrating from Exchange Server 2003 and Active Directory 2008 to Exchange Server 2010 and Active Directory 2008 R2. The key steps include installing prerequisites, installing Exchange 2010, configuring Exchange 2010, migrating mailboxes and public folders from Exchange 2003, updating DNS, and removing the legacy Exchange 2003 servers once the migration is complete. PowerShell commands are provided as alternatives to the graphical user interface for many configuration tasks.
Integra sppt-elastix-asterisk-configuration
This document provides steps to configure an Elastix PBX appliance to interface with Integra Telecom's SIP trunking service. It outlines 13 steps to add SIP trunks, outbound routes, and inbound routes. Key settings include configuring the trunk with Integra's SIP credentials and setting the outbound dial patterns to route via the Integra trunk. Troubleshooting tips are provided to test connectivity on both the customer and Integra networks.
Ftth residential-wifi-modem-guide
This document provides instructions for setting up and using a residential gateway model TG784n. It includes sections on hardware setup, installation requirements, an easy setup wizard for initial configuration, manual configuration instructions, wireless network setup, port forwarding configuration, and troubleshooting. The easy setup wizard guides the user through selecting an internet and voice service, and entering credentials to automatically configure the gateway for basic connectivity and services.
Setup VoIP System and Interconnection with LTE network
Setting up VoIP management server using a communication framework and let the users from LTE networks to register and make voice calls over IP system as well as video session.
Similar to PROCEDURE TO SETUP EI-T1 EI-T2 FTP SETTINGS.pdf (20)
Mobile Commerce ppt....... Provides a website interface to the customers to b...
Mobile Commerce ppt....... Provides a website interface to the customers to b...
install active directory and configure domain controller
install active directory and configure domain controller
Setup VoIP System and Interconnection with LTE network
Setup VoIP System and Interconnection with LTE network
Recently uploaded
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Top Interior Designers in Bangalore.pdf1
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Technoblade The Legacy of a Minecraft Legend.
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Actions and Commands:
Tap, Swipe, and Pinch
Rotate and Shake -Buttons -Menu Bars – Menus
Toolbars - Links- Action Panels
Hover Tools - Keyboard Actions- Drag-and-Drop
Typed Commands-Affordance-Direct Manipulation.
Forms and Controls:
Basics of Form Design
Patterns.
Revolutionizing the Digital Landscape: Web Development Companies in India
Discover unparalleled creativity and technical prowess with India's leading web development companies. From custom solutions to e-commerce platforms, harness the expertise of skilled developers at competitive prices. Transform your digital presence, enhance the user experience, and propel your business to new heights with innovative solutions tailored to your needs, all from the heart of India's tech industry.
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
一比一原版(LSBU毕业证书)伦敦南岸大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(LSBU毕业证书)伦敦南岸大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Recently uploaded (20)
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Revolutionizing the Digital Landscape: Web Development Companies in India
Revolutionizing the Digital Landscape: Web Development Companies in India
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
PROCEDURE TO SETUP EI-T1 EI-T2 FTP SETTINGS.pdf
- 1. PROCEDURE TO SETUP EI-T1 & EI-T2 FTP SETTINGS
- 2. FTP Setting STEP 1- In Control Panel window, click Programs and Features. STEP 2-Click Turn Windows features on or off
- 3. STEP 3 -Find and Click on the FTP Service and IIS Management Console. Then Click OK. STEP 4 - Wait for Setting changed and then click Close.
- 4. STEP 5-Press window button, and then type iis. Then click on Internet Information Services (IIS) Manager. STEP 6 - Click Sites, then Click Add FTP Site…
- 5. STEP 7: Type name of the Terminal. EI-T1 for Terminal 1 EI-T2 for Terminal 2 STEP 8: Type Physical path as below, then click Next. C:Hitachi_MitoCBTC_Control_TerminalDataCou nters
- 6. STEP 9 - Type IP Address of Terminal LAN1 of own PC. STEP10- Remove the check of Enable Virtual Host Names check box. STEP11- Check the Start FTP site automatically check box. STEP12- Select No SSL radio button. Then click Next.
- 7. STEP13- Check Authentication check box. STEP14- Select All users for Allow access to. STEP15- Check the Read and Write check box for Permissions. STEP16- Click Finish.
- 8. STEP17- Click site of the other EI Terminal, then Click Bindings…
- 9. STEP18- Click Add. STEP19- Select ftp for Type. STEP20- Select the IP address of the other EI-T. STEP21- Type 21 for Port. Then click OK. STEP22- Both EI-T1 & EI-T2 ip addreess has to be speciefied in both the systems(EI-T1 & EI-T2)
- 10. Monitor settings . Open hitachi mitho-monitor-ini-monitor def1 file to be modified as per the station specific IP. LAN1=10.113.27.33 LAN2=11.213.27.33 NOTE: 27 IS THE STATION CODE FOR KESHAVGANJ
- 11. Monitor settings . Open hitachi mitho-monitor-ini-monitor def2 file to be modified as per the station specific IP. LAN1=10.113.27.32 LAN2=11.213.27.32 NOTE: 27 IS THE STATION CODE FOR KESHAVGANJ